HP Photosmart and Microsoft Digital Image Suite 2006 will not start/run correctly

Similar Questions

• Said Microsoft digital image suite is not compatible with Windows 7, but...

  So say microsoft digital image suite is not compatible with Windows 7, but I just read this on a forum and other people were in agreement:

  "I have Microsoft Digital Image Suite 2006 and installed on Windows 7 64bt without any problem at all. I didn't do anything special, just installed. I don't understand why other people had problems. "

  me the trying to instal it or it will cause problems to other programs? I can't find anything as versatile as Microsoft Photo Suite Edition and would be very happy if it would work on windows 7.

  Nope. Not bad at all. At most, it will not work or some features work exactly as they should. But, most of the people that I have seen and read about had no problems at all. You really don't lose anything else than it is time to give it a try. Chances are, though, that it will work without any problem.

• Microsoft Digital Image Suite

  I am successfully using Microsoft Digital Image Pro 10 with Vista. I used this for many years and do not want to give it up, but maybe need to buy the new computer. Is there a there editing program that compares in quality and ease of use that works with windows 7? I tried a PSE and very hard to do all the things that are a snap with picture Pro.  Help!

  Some users of Windows 7 seem to have success installing and
  running Microsoft Photo Suite Edition and other are not. Best bet would be
  be to give it a try.

  The latest version of 'Digital Image Suite 2006 Anniversary Edition'
  would probably be the best chance.

  In my opinion... There is no digital image editing software equal
  for Microsoft Picture It! / Digital Image line of products.

  If you want to experiment with other programs... What follows
  review site can offer some possibilities... (I think that they all offer
  trial versions):

  Compare the best 2012 Photo editing software
  http://photo-editing-software-review.TopTenReviews.com/

• Microsoft Digital Image Suite anniversary edition Editor has encountered an error.

  Original title: XP SP3/Digital Image Suite Anniversary Edition question

  I use MS Digital Image Suite Anniversary Edition (DISAE) on a Windows XP SP3 computer.  I get this error when I try to open DISAE:

  "Microsoft Digital Image Suite anniversary edition Publisher has encountered an error and needs to close."  The error report was not available.  Reinstallation of Microsoft Digital Image Suite anniversary edition Publisher can reactivate the error report feature. »

  I tried to change settings in the start menu > right click on my computer > properties > advanced > Error Reporting > disable, enable (checked everything) does not.

  I tried to reinstall DISAE nothing works.  I tried to uninstall, reinstall, AND REINSTALL AGAIN without success.

  Has anyone ever got this message of particular error and, if so, what have you done about it; so that the DISAE open reliably EVERY TIME?  Thank you.

  Hi Ganesh, thanks for trying.  I tried a different approach.  I used a program uninstaller - Revo Uninstaller - completely uninstall MS DISAE, including all registry entries associated with it could find.  Then I reinstalled DISAE.  This seems to have fixed the problem, so maybe it was a registry entry that program uninstaller left behind.

  I still don't know why the EULA appears in Japanese characters... but if the program works, I guess it doesn't matter.
  Thank you very much for trying to help me solve the problem, and I'm sorry it took so long to reply to your reply.

• Come posso aggiornare Microsoft Digital Image suite per Windows Vista?

  Ho da hosts Microsoft Digital Image suite sul mio PC Windows VISTA dopo aver fatto a ' operation di ripristino e funziona non più come prima. Ho noticed che nelle options compatibility non è Vista, my tutti gli altri di. Come posso fare an o UN adattamento aggiornamento a Vista?

  Hello

  ·                         I'm sorry but these forums only offer English language support

  To make sure you receive support appropriate for your location information, select the parameter in the list below and then click the arrow button.

  ·                         https://support.Microsoft.com/common/international.aspx

• Microsoft Digital Imaging Anniversary Edition-could not remove photos from the digital image library

  Microsoft Digital Imaging Anniversary Edition

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  ========================================
  The MS Digital Image Library maintains a proprietary database
  named Pictures.pd3 who is not deleted when the program is
  uninstalled/reinstalled.

  If you rename Pictures.pd3 to Pictures.OLD... the next time you
  Open the library, it will be because it was the first opening.

  Windows XP... the Pictures.pd3 database file is located at:

  C:\Documents and Settings\.
  Local Settings\Application Data\Microsoft\
  POD\Pictures.Pd3

  If you can't find the file, open a file and
  Reach... Tools / Folder Options / View tab on...
  Tick... Display the hidden files and folders / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to cut and paste in microsoft digital image standard 2006

  I have windows vista home premium.  After the download of Olympus, I want to copy / paste some of the pictures in 2006 of IDM.  How can I do this?  Thanks for any help.

  You confuse me now... If you include all the details
  It will be impossible to guess what you are trying to accomplish.

  If my assumptions are incorrect, you will need to explain in more detail.

  OK... so what you want to do is sort the photos by date... How does
  Digital Image 2006 get involved? And what has been reduced and
  stuck?

  Do you mean that you look at the pictures in the Digital Image
  Library? Your version includes Photo Story 3.1 that allows
  You can create a VCD?

  The best way to sort photos would be to go to your photos
  Folder where the pictures are actually registered. (Start orb / photos)
  (the photos are not 'in' the library... it is simply a viewer.)

  Create a new folder and copy all the photos you want to
  to include in the video slideshow (photo story project).

  Open the new folder and you should be able to sort the photos by
  Drag and drop. Once they are in the order that you need... you will need
  to rename pictures with numbers... exactly as follows.

  (Also it can help sort out the photos, if you're going to...) View / details... and
  left click... "Date picture taken" column) (go to see /)
  Thumbnails)

  Reach... Edition / select all...

  Right-click in the first picture in the group, and from the menu choose...
  Rename type... following .jpg (10001)

  Then press on... Enter... and Windows renames the remaining photos...

  .jpg (10002)
  .jpg (10003)
  .jpg (10003)
  etc. etc...

  Now the files should remain in this order.

  If you import this file into the library, you can use pictures to create
  a Photo story.

  Also... in the Photo story file tray, you can select (highlight) photo and
  Move it left or right with the arrows on the right side of the screen.

  Photo story has a limit of 300 photo and even less if you use a lot of movement
  and Transitions for small projects are the best.

• Is Microsoft digital image suite 10 compatible with Windows Vista?

  Help! I just got a computer with vista. I want to use this program, but it will not work properly. y at - it a patch or an upgrade, I can get? I like the software and want to continue using it.

  See here:

  http://www.Microsoft.com/products/Imaging/default.mspx

  "lisaKALEM" wrote in the new message: * e-mail address is removed from the privacy... *

  Help! I just got a computer with vista. I want to use this program, but it will not work properly. y at - it a patch or an upgrade, I can get? I like the software and want to continue using it.

• Cannot download and install programs or well they will not start when it is installed

  In the past two months all of a sudden some programs no longer work and I can't install new programs.

  Ex 1 that I downloaded and installed SKYPE and used it no problem, now I can't open it for use on my computer. If someone calls me, I can access and use it.

  Ex 2, I can not install the Blackberry connection on the computer. I can download the program on my counter top, it starts the installation and then installs.

  I did a restore on the computer last night to to back to September when things worked. This did not help?

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error message when you try to install the Blackberry connection?

  It is possible that another installed 3rd party program or application is causing the conflict with this installation. Also launch Skype on own startup and check.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• upgrade from Microsoft digital image suite 10

  Now I have 10.  y at - it an upgrade?

  No, because this product was removed by MS in 2007

  V10 is not displayed under win7 compatible

• I installed the last AE and the bridge, but the bridge will not start.

  I'm going to 'Effect/Presets' > 'Browse Presets', but get the error: "the bridge is not installed.  "Go to www.creative.adobe.com/apps and install this feature.

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• support Microsoft digital image pro 9

  How can I load an image pdf into image digital pro 9 microsoft

  How can I load an image pdf into image digital pro 9 microsoft

  Microsoft Digital Image Pro 9 is not compatible with Windows 7.

  Ref:Compatibility Center

• Microsoft Digital Image Pro 10 and Coolpix S9300

  Since I purched Coolpix S9300, I cannot save pictures after I have change in Microsoft Digital Image Pro 10.  I have a new computer with Windows 8 and still the same problem (the old computer is Windows XP and could not save the edited either images).

  When I try to save it, I get a window appears which says 'cannot save the image for (then the path of the file name).

  It's just ordinary .jpeg, not in read-only files and I have no other problems with previous cameras, just this one.

  I can, however, edit them on Photo Shop and then save them... but I don't like this show as I do Microsoft Digital Image Pro 10! I would rather work with this program.

  Any help would be grateful.

  Chris

  Since I purched Coolpix S9300, I cannot save pictures after I have change in Microsoft Digital Image Pro 10.  I have a new computer with Windows 8 and still the same problem (the old computer is Windows XP and could not save the edited either images).

  When I try to save it, I get a window appears which says 'cannot save the image for (then the path of the file name).

  It's just ordinary .jpeg, not in read-only files and I have no other problems with previous cameras, just this one.

  I can, however, edit them on Photo Shop and then save them... but I don't like this show as I do Microsoft Digital Image Pro 10! I would rather work with this program.

  Any help would be grateful.

  Chris

  =========================================
  A question... all .jpg photos have this issue or simply the
  those created by the Nikon S9300?

  If you import a photo you changed and re-recorded
  In PhotoShop in DIP 10... does the problem always
  occur?

  Have you tried running DIP 10 in Compatibility Mode?

  Windows 8 - operate your applications and devices in Windows 8
  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

  I wonder if you might have better results with the
  latest version of the Digital Image (version 11).

  There is always a 60 day trial version which can be downloaded
  from the following site if you want to experiment.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Microsoft Digital Image Starter Edition 2006
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=11954

• Uninstalled 'Microsoft Digital Image' by mistake, how can I reinstall it?

  I need to reinstall "Microsoft Digital Image" in my Windows XP SP3. Apparently my DVD players do not work without it. My Microsoft Digital Image software has been uninstalled by mistake. Certainly, anyone know how without reinstalling Windows?

  Hello

  What exactly happens when you try to use the DVD player? You receive an error message?

  If you receive an error message and then, after return the exact error message.

  Run the fix it tool in the following article and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  See also:
  How to troubleshoot problems that occur when you play a DVD in Windows XP
  http://support.Microsoft.com/kb/308012

  You can download and install Microsoft Digital Image using the below mentioned link:
  Microsoft Digital Image Starter Edition 2006
  http://www.Microsoft.com/download/en/details.aspx?ID=11954

• Unable to create the new project Windows Digital Image in 2006.

  Original title: Digital Image 2006 Windows?

  My operating system is Windows XP SP3.  I have installed Windows Digital Image 2006 but when I clicked on "create a new project" he has opened with a page containing a red X, calendar, frog and a butterfly, and I was unable to go further.  It is a good editing software, but I would like to be able to use all the facilities.

  If someone familiar with this program, please indicate what could be the problem and how I might be able to correct even.

  Thank you.

  Look at the link here because it says Microsoft Digital Image 2006 is not compatible with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Windows%20Digital%20Image%202006

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn