HP Photosmart C309a does not print after I installed new black ink cartridge.

Similar Questions

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• HP Photosmart C309a does not print on wlan

  Photosmart C309a is about 1.5 years old. Since a few days it prints no more on wlan, printing by port USB is fine. All other devices communicate very well on the router.

  I tried to set up the printer, but it does not detect a router (let the search for more than 10 min)

  Can he do something or is gone hadware?

  Best regards

  Komarchuk

  OK, done

  wireless radio also shows failure after reset.

  What is the probability that it is a hardware problem?

  The printer is out of warranty, so I have to pay for the support of such, which can't help but if it's a hardware problem

  Best regards

  Komarchuk

• Photosmart 3200 does not print after a Win 7 Upgrade

  our Photosmart is connected to the Linsys wireless router.  I put Windows 7 on my laptop (Dell Inspiron).  I loaded the drivers for Win 7 HP.  Adding printer functions and did while it was plugged into the laptop, then wireless, had to manually set the IP address of printers and the laptop did not.  then all loaded, I can see the printer, even ink levels, but when I printed, it Files and then I get an error message.  I tried to troubleshoot it, but he couldn't come up with anything...   Any thoughts on what it takes to get this happed to print is appreciated, oh yes, he did print the test page.

  Hi, Yes, the printer is only attatched ot the router wireless... I attatched just for the laptop with the e cable so I could print a pinch.  it load and I have this printer on my list of printers.  then I disconnected and loaded wireless that worked but I had to use the option to manually set the IP address of the printer.  So now on my printer list and it shows its ok "connected."  I can see the ink etc levels.  but when I try to print, it seems that everything is fine, he winds up in the print queue and say 'impression', but after a bit it turns into 'error '.  So I clicked and ran to help her out but going home.  He did print the test page and the page of diagnosis? He defined as my default.

  I tried to print an e-mail of my Storage with Windows but the same error occurs.

• Photosmart 6520 does not print after upgrading the firmware on the router.

  I have problems with my router and a remote technician for Verizon FIOS updated firmware, solve my problem of the internet, but now my printer is not working.  When I try to print from my macbook pro (OSX Lion 10.7.5) it is said that the printer is idle.  When I try to print from my ipod and the iphone, it is said that it prints, but then nothing happens.

  I was able to set up direct wireless to print, but I don't want to go into the settings and change networks whenever I need to print.

  I tried to turn off the router unplug the printer and turn it back on.

  I checked to make sure that the WEP code and network name are correct.

  What can I do else?

  treeBear wrote:
  

  ricksmom wrote:
  

  I appreciate really all the efforts that you and other posters are on this issue, but I feel that I will not find a solution.  Maybe a new router?

  It is a long shot. But since we are short of ideas, please try to change the configuration of the router from WEP to WPA2 and try again to establish the connection. Because WEP is very old standard, some routers may have a few inherited defects that were never resolved.

  Well... This opens a huge can of worms, it leads eventually to a solution.  I changed the security settings and when I presented to them, 'wait while we apply the settings' screen appeared and never went away.  The timer kept spinning and this went on for over an hour.  Neither the old or new passwords worked and I completely lost my internet connection.  I called Verizon and ordered a new router and said the technician on the line of my being stuck in limbo. After a few basic tests (unplug and pluggng again) she transferred me to someone in the advanced group.  To make a long story short, he traced the fault not the router, but the optical network outside my home box.  It reset, reset the router (losing the new security settings and everything else) but my internet is back, and fortunately, so is my printer.  I'll live with that until the arrival of my new router state-of-the-art.

  Thanks for the suggestion, it was a frustrating experience, it finally lead me to a printer to work! I doubt that I would come to this point another way.

• HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

  I had a Library/Startupitems error since update my software HP a couple of years ago.  Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software.  There are no active link in the pages of HP support for a download.  I found a C6200 series pilot online, I have installed, but now I can't print anything but a test page, and I still have the error Library/Startupitems.  As it is, I can not even find this file to fix the error.

  Hi @Eric_V67

  I don't know exactly what causes this error, but I think it has something to do with permissions of drive Macs. Please, try the following steps and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Officejet 6600 do not print after the replacement of HP ink cartridges

  Operating system: Windows XP

  Error message: no

  Downloaded HP Scan Doctor: don't find any problem

  White pages fate after that print request is made

  @oceanbob, Yes, I had the 6600 to print correctly after several head cleaning functions. Whenever you clean the printhead using the Control Panel, that it asks you if you need to make a more energetic. I think I had to do 3 or 4 cleanings in a row to get the black works correctly. My daughter has set up the printer to print in black only because she had need of color for first cleaning cartridges is not cleaned the heads of color. After my color will revive girl, we found that we needed to go through a new series of 3 or 4 cleanings. You just continue to run the head cleaning function until he starts again to print properly.

• my hp deskjet 5740 does not print more of my change of ink cartridges.

  Today, I changed the ink in my HP Deskjet 5740 printer cartridges; I can't go to my printer.  Someone knows why?

  janisleona,

  What operating system do you use? You get errors when you try to print? What application you are printing from?

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  the printer is not the shades of grey even print cartridge is not yet empty

  y at - it software for hauler color printing?

  Thanks for your comments

  Hello Nilsvolkel,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  Do not require any special software.

  However, you can use the steps in the following articles and check.
  Reference:
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

  http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

  Please keep us informed.

  Thank you

• C5550 does not print after upgrade 10,5

  Good, Startin ' Slam beers now... Updated my Mac to leopard (10.5.8) desktop computer and my Photosmart C5550 does not print. I uninstalled and reinstalled the printer software and everything seems normal until I got to "print" a document. It seems to send the info to the printer, but nothing happens. When I look at "Series of HP Photosmart C5500" in the doc it activates and when I select the icon in the doc it says under "printing" status and above her beside the printer image says "connection inactive. This printer is connected to my Mac via USB and it will not print a test page when envoys of the computer, but it will print a test page for its own controls. I thought that this printer is compatible with 10.5... Am I wrong? In addition, my desktop widget recognizes the printer and even says the ink levels. Any suggestions?

  Thank you

  just turn off the printer for the first time since the re - install and it's new to print.

• Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

  I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

  reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

  is going to be the fix for the problem. Is this true?

  Hi @79pinetree,.

  Thank you for joining the HP Forums!

  I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

  Please see this post, dedicated to the best printing experience, of @Bill_F.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!