HP Photosmart C4480 all-in-one printer. Message "Incompatible cartridge". New 75 HP cartridge inst

It was for a while, then recently started printing with the message "Incompatible cartridge".  I followed the instructions how to clean cartridge, still with the message "Incompatible cartridge".  Help!

HI - at this point, replacement of the cartridge would be the next step.  I hope it solved for you!

Tags: HP Printers

Similar Questions

  • Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

    When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

    Thanks for all the useful things try, but without apparent reason, the printer started working again.

  • Message or incompatible cartridges on HP Photosmart C4480 all-in-One Printer

    I changed my color ink cartridge (a 75XL) on Monday, 16/04/12, and everything printed fine Monday.  I turned off my HP Pavilion laptop and printer on Monday night.  Tuesday, 04/17/12, I started working on my laptop and when I tried to print the small printer screen says "not compatible ink cartridges and my laptop screen said" the next cartridge has a problem: black ink cartridge '.»  I had kept the black in (a 74XL) cartridge because he still has a lot of black ink in it.  I removed the color and black cartridges, made sure that the point of contact with the printer is clean, so that both cartridges have ink in them and they are placed in the correct locations (black on the right) and the cartridge color left.  I don't know why I get these messages and why the printer does not print when he did print Monday after changing the color cartridge.  The two ink cartridges are XL, but they are not identical. The black ink cartridge is more horizontally (fate of the stick to the door of printer cartridge) further than the color ink cartridge.  The two are the same vertically / height.  Both cartridges are the type "XL".  I tried to download and use the diagnostic tool and it has led to tell on the screen of my laptop there is no problem with the printer.  Can an HP agent contact me and help solve this mystery.  It's very frustrating because I only use HP products (including two ink cartridges); and if I had to buy new cartridges, how do I know that this problem is happening?  Help please!  My email is [removed personal information] Thank you.

    Hello

    Please see the following link for t\s on this issue.

    http://support.HP.com/us-en/document/c01442936

    If the t\s has been completed restore printing to its default settings, remove the cartridges from the printer.

    Steps to follow:

    • Start button / stop + Combo Cancel button
    • Enter the combination of special keys 1 [Scan] 3 [color copy] 2 [Black copy]
    • "Support menu" will be displayed
    • Press 2 [Black copy] until the display shows "Reset Menu".
    • Press the 3 [color copy]
    • Press 2 [Black copy] until the display shows "semi-Full reset".
    • Press the 3 [color copy]
    • The printer shuts off and turn on by itself, else wait for 20 seconds and power on the printer

    Note:

    All user settings will be restored.

  • HP Photosmart C4480 all-in-One gives the HP Solution Center error

    Hello

    I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

    I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

    When I run the HP Solution Center, it says at the top:

    "HP Photosmart series C4400

    Disconnected! »

    When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

    Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

    Any ideas?

    Thank you!

    HP Envy m7 running Windows 10.

    Simply click on the star

    Thank you

  • can I use XL 364 cartridges in color in my photosmart c309g all-in-one printer?

    My photosmart c309g all-in-one printer has a cartridge black 364 XL and smaller for the colors. Color XL cartridges can be purchased in stores like Media Markt. Color cartrideges XL fits my printer?

    Hello

    Yes, the XL 364 cartridges are compatible with your printer, as you can find below:

    http://support.HP.com/us-en/document/c01842734

    Kind regards

    Shlomi

  • HP Photosmart C4480 all-in-One takes forever to print

    HP Pavilion dv6-6061eo laptop

    Serial number [personal information deleted]

    Prod, number: LQ769EA #UUW

    Printer: HP Photosmart C4480 all-in-One connected USB

    Operating system: Windows 7 - all updates - updates of August incl. -ETH on

    Troubleshooting done - but all the reports in the order

    My Tech expertise is intermediate.

    No new software has been installed

    Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

    Hello

    Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

  • Photosmart C6380 all-in-One - printer error message question

    I have a HP Photosmart C6380 all-in-One printer.  It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window.  It is said: ' Please Oxc19a0035 turn printer off, then on.  If - before the printer print, I must turn off first and then on again.  It's more boring, to say the least.  Does anyone have a suggestion as to how I can solve this problem?  Thank you, Ms. Dahlia

    The troubleshooting steps described in this document may help to resolve the error.

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

    My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

    @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

    I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

  • Cannot install HP Photosmart C6380 all-in-One Printer

    Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

    None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

    Hello

    1. who is the operating system installed on the computer?
    2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
    3. do you get an error message when you try to install the driver?
    4. what all troubleshooting have you tried?

    If you use Windows 7, follow these methods.

    Method 1: You can also run the fixit of material.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: in the Windows printer problems

    For more information, see these articles:

    Install a printer
     
    Find and install printer drivers

    Please provide us with more information on question help you also.

  • Photosmart 4700 all in one print but not scan

    My photosmart c4740 (all-in-one) printer will print but not scan

    Hi Donpaladino,

    1. What is the installed operating system on your computer?

    2. what happens when you try to scan documents?

    3. you receive an error message?

    I suggest you to follow the steps and check if it helps.

    Follow the steps in the link and check if that helps.

    HP Multifunction printers - I can't scan in Windows using the HP software

    If the problem persists, you can also check out the links and check if it helps.

    Scan and send (e-mail, send to folder, digital transmission, etc.)

  • HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

    I'm about to pull out my hair!

    My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
    I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
    I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
    It seems to me have tried every download from the HP Web site, and nothing seems to help!

    Hello

    1 did you change your computer, after which the issue started?
    2. are you connected to a domain?
    3. have you downloaded the correct driver version?

    I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

  • HP Photosmart C8180 All-in-one Printer

    Hello

    I have a blue screen on my HP Photosmart C8180 All-in-one printer with a code of B3D3F8A8. HP Tech indicate that my printer is obsolete, and I need to replace. nobody there knows not what says this message and if I need to replace my printer?

    Thanks for the help.

    Try of the reset the printer as shown in this page.  Unfortunately, the error codes are not documented, if reseting the printer as described on this page is not enough you will probably need a new printer.

  • Impossible to analyze using Photosmart C4480 all-in-One

    I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

    If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

    Go to Applications/Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
    Click on continue and let it finish

    Download and install this: http://support.apple.com/kb/DL907

    Restart your Mac.

    Now reset the printing system:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!

    Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

  • HP Photosmart Plus all-in-One Printer series - B209a

    Hello

    I have a problem with my HP Photosmart Plus all-in-One Printer series - B209a printer.

    It prints a picture by using too much magenta.

    When starting the printer, I got a message saying that I had to replace the magenta toner with a new one. I did as instructed. I printed a new document, but it came out in magenta.

    Even if the other cartridges were not empty and yet I replaced with new ones, thinking that maybe the ink dries up because I have not used the printer for a few months now. I used all original HP XL cartridges.  Subsequently, I printed testpages 5 before you print my picture.

    The printer uses all colors now, but it uses too much magenta to print my photo.

    I used the printer for several years now and never had this problem before.

    Is this a problem that can be solved?

    Troubleshooting steps described in this document can help solve the problem.  Be sure to check the vents to make sure that they are not plugged.

Maybe you are looking for

  • Weird problem with shared resources in Windows XP

    Hello I have the odd problem with 2 machines WinXPSP2. I can manage and see their actions of any another machine machine in the field. But when I try to navigate machine B for his actions or machine has the manage, that's impossible! and what makes i

  • Screen savers.

    How delete/remove a screensaver on my computer?

  • installed a new hard drive install vista and full custom

    I bought a new hard drive for my laptop and I tried several times to re - install windows vista, I have not yet defined a partition, but I don't think that should affect the initial installation. I can get windows installed the first reboot and after

  • Convert 1231G to LWAP, won't find controller

    I have a self-contained unit of G 1231 and a 4404 wireless controller, both are on the same subnet, the controller is in mode layer 2 and has strictly necessary set up right now. I converted the 1231 G to LWAPP, which was a success. But the LWAP won'

  • webmapview on the bug of waterfalls-samples

    of https://github.com/blackberry/Cascades-Samples/tree/master/webmapview I had I dunno if everyone in the face of this bug? can someone help me solve I already try to use the default size on qml and even css it self but did not help I already create