Similar Questions

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• Photosmart C4480: Copies of brands, does not print, makes a jump to page instead of print.

  WinXPSP3, 2bg RAM: Photosmart C4480 makes copies but does not print.  Print jobs sent to the cause of the printer that a page break without any movement of the ink cartridges, then the print job is deleted from the print queue, as if it was printed.  This printer was working fine for a long time and only recently started doing this.

  Thank you.  I'll try both suggestions.

• My printer does not print the words.

  I have a HP Photosmart.  My operating system is Mac OS X 10.6.8 version.  I woke up this morning and my printer does not print the words, only the outlines of the text boxes.  It's the same thing on my other computer that is running Windows XP.  I changed the ink cartridges.  When I ran the alignment he printed the blue boxes around the page and black boxes on the right and left sides.  I also printed the word IMPORTANT! but that's all.  I ran a print quality Test and it printed blue, red and yellow stripes horizontally and vertically, thin and thick, "BOLD" and vanish.  He also printed them in parentheses and nothing in the parenthenses.  I uninstalled the printer on my Mac and reinstalled.  I got all the updates also.  This did not help.  I tried to get the updates for the printer by using the application update on the printer, but he said that none was necessary.  Help, please.

  Thanks for your concern, but I threw the thing in the trash.  It was one of your printers 'free' which uses a very expensive ink.  We have collected these printers over time so I opened one I got "free" last month.  I hope it lasts over a year.  Will you be playing with programming and I need a new driver soon for this one also?  Sorry to appear cynical, but at the moment I don't have any different attitude to the project.  I am informed that I will need a new driver for the operation of our other printer and I don't understand what was wrong with the old driver.  We did nothing.  It should work!  I just want to print, words!

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Photosmart HP 7510: Single color does not print

  Hello

  Does not print the magenta color. I put a new cartridge in (both are new and not expired).

  As requested by another post on this page, I have cleaned the contacts on the cartridge and printer with clear water. Did not help.

  I ran a printed report that says in the text that all is well, but the magenta is very slightly ridged (so not quite Miss).

  One of the ideas for what I can try next? Appreciate any help you can offer.

  THX!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• HP photosmart c6180 all-in-one: does not print because some cartridges are empty

  I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

  Hello

  To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

  Kind regards.

• Safari and Google Chrome does not open Web pages

  I have a macbook Air, about 1 year ago. On safari and chrome are the only sites that will open: apple (like this forum) Web sites, netflix, youtube and gmail. I can look for other sites, but when I click on the link, the following message appears like this-(for example on weather.com):

  Www.weather.com page does not work

  www.Weather.com has not sent any data.

  ERR_EMPTY_RESPONSE

  So, the Web site of cnn, another example, looks like this:

  Does not the www.cnn.com page

  www.CNN.com has not sent any data.

  ERR_EMPTY_RESPONSE

  Of course, I don't know what happened, any help greatly appreciated.

  You can follow the article: If Safari does not load a page or Web page elements are missing - Apple Support

• 7510 photosmart e-all-in-one does not print

  I had setting successful place Photosmart e-all-in-one printer 7510 when I bought first. Super easy to install and I print wireless all the time.

  I recently moved and tried to uninstall and reinstall the printer so that I could print wireless again. I did exactly the same thing to install because I did the first time and it doesn't work. I went through all the steps help and may not know what the problem is.

  1. the printer is turned on.

  2. the printer is certainly connected to the network. No problem found on the wireless network test.

  3. my computer is not connected to a virtual private network.

  4. the computer and the printer are on the same network. Name of the network on the wireless network test is the same name of network connected to my computer.

  5. There is no firewall does not block the detection of the printer.

  6. the wireless router is not in a bad state of operation. If it were, I would not be able to get online, right?

  7. I do not use the 'connect a new printer' resettlement.

  8. I don't know that I downloaded the appropriate software drivers.

  I don't know what else to check. The only thing that has changed is the router and the internet provider. I got the same laptop before I move. Everything works fine print/scan when connected via a USB port.

  You're not the only one having problems with the SBG6580.

  Your internet provider has other available modems?  (not motorola)

• HP Photosmart c309a network wireless radio does not. printer no longer sees (network)

  My Photosmart c309a printer is not ALL networks.

  -using the windows Vista

  -four portable wireless maintain excellent connections to the home network

  -a the recent failure of electricity, but all computers domestic mobile re-login to the network;

  -a ran HP wireless network Test Report which shows wireless "On", but "The FAILURE" of wireless work;

  -diagnostic report also shows wireless radio does not. and I have to contact HP support.

  So far, I took the following measures:

  -stop the entire network (Linksys router)

  -unplugged and replugged the printer and router

  -set factory default printer

  -all I can think (but go ballistic)

  I have a similar problem, except that my 309 a link but if it is idle for a few moments he log out and have to stop and reconnected or reset using the configuration menu.  Contact with HP said that HP is aware of the problem but that he has no intention to post a fix and the problem is inherent in most of their printers...  Techrep indicated that the best solution to get a new printer.  I recently bought a Canon all-in-one and it works as advertised.  I always use my HP in a wireless mode, but you need to restart after each impression if more that a few short minutes between printing.  Sorry I'm no help, but just passing on what HP says about this printer.

• Photosmart HP 6520: black ink does not print

  I've had the printer for less than 2 years 6520 and black stopped printing. I did all the instructions on the screen for troubleshooting, and still it does not work. If anyone has some advice, it would be appreciated. I'm not wanting to pay a fee to speak to a live person. What happened to free customer service?

  Try here on Youtube.

  https://www.YouTube.com/results?search_query=HP+5520+print+head

  If no joy the printer is toast.

• HP Photosmart Premium c309g-m PDF does not print correctly

  Am under Win XP. have HP Photosmart Premium c309g-m; running the last printer driver; printer connected wirelessly, using Adobe Reader 11.0.0.4.  In other words, I'm under the last printer driver and the latest version of the Adobe Reader software.  Everything prints fine except PDF.  See the PDF file in Adobe Reader, the print preview looks good, but I get blank pages on the printer with most of the settings.

  The pdf document is black and white.  I feel better if I say the HP print driver to print color and say the Adobe Reader print dialog for 'print picture '.  The output is readable, but much too weak.  Same results when you run the same configuration of printing on Windows 7.

  HP produces a printer whose driver is able to print PDF documents properly?  If so, I would consider buying one.

  Hi FeralUrchin,

  Thanks for the reply. No problem at all!  I'm glad that the replacement printer works very well.  If you have problems in the future feel free to go on the forum or contact the helpline.  Here is a link for the global coordinates for any future reference if necessary. Click here

  Thank you for being a customer of HP.

• Occasionally Safari for Mac does not load web pages; Firefox is loading of web pages. The possible reasons?

  I started having this problem around mid-2016. In short, if I use Safari to surf the internet, after about 5-10 minutes, Safari would not completely load the page not load completely. If I turn off my wifi then return (on the macbook), the page will load temporarily. On the other hand, Firefox does not have this problem and loads web pages normally. Possible reasons or solutions?

  I do not think that the problem comes from my internet connection or your router because my iPhone Safari normally connects under the same network.

  I use a Macbook Air, OSX V. 10.11.3 (El Capitan)

  Go step by step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Tools, Windows Update does not acquire web page

  When I try to update my IE 8 web page does not open.

  When I try to update my IE 8 web page does not open.

  If you go, IE8 > tools > Windows Update... It will NOT give you a web page. It gives the Windows Update window, the same as you can get via the control panel.

  What operating system do you use?  Mine is Vista.

  t-4-2

• BlackBerry smartphones does not load web pages

  Hi could someone help me comes whenever I go on the internet, it does not load the entire page, a part of the text is missing any pages but some bookmakers William Hills Sickipedia if I go on my O2 account, it is the same. But twitter loads ok even with Facebook suggested his because im running old software which does not update past the 6.1.0 is the problem someone has any ideas

  Hello davideastwood

  Please try this:

  On your home screen, open your browser > press the Menu key > Options > scroll down to clear browsing data (mark all fields) and then click clean now.

  Once it's done perform a battery pull reboot by removing the battery while your unit is powered on wait a minimum then reinsert back. After restarting your browser try again and if it loads web pages.