HP Photosmart C4780 Wireless & Windows 7

Re-installed from the factory settings on HP Pavilion Notebook (9 hours on & off w / technical support)... 2nd time because the drive is not able to load the software for HP Photosmart C4780. Disk is for Windows XP & Vista and when I go to HP Software Drivers it says 54 hours of download time! Don't want to go through this all night too! Any ideas? Printer is 77 days out of warranty

PS of course...    Not very computer savvy

Follow the instructions in the resolved Yes PrintDoc problem!  Thank you

Tags: HP Printers

Similar Questions

  • Photosmart C4780: connection for Photosmart C4780 wireless

    I spent two hours through the simplistic menu of the printer, only to print copies of the Configuration Page of HP network and Test wireless network without success reports. I think I made all the necessary steps... such as the restoration's default network.

    "Your HP printer cannot find your wireless router. Check that your wireless router is powered. Make sure that your network printer HP (SSID) name exactly matches the network name (SSID) wireless routher yout. If they do not exactly match, run the installation of the wireless network to set up your HP printer.

    Well, I have entered my IP address of the router as the url of the browser and connected to my cable account, but was not able to change the SSID.

    I also looked at the Youtube page help HP and on discussion forums and tried to use the suggestions.

    One who seems to be similar to my situation is this:

    http://h30434.www3.HP.com/T5/LaserJet-Printing/driver-for-HP-Photosmart-C4780-for-OS-X-Mavericks/TD-...

    I, too, can't find "the HP network configuration.

    I also downloaded the Printer Driver HP Patch for my OS.

    At this point, I'm not sure that I can do. The other suggestion on this page was to find a friend with a PC. I phone my mother on-site, running Windows 10. I also downloaded its respective driver. I don't know what I should do next. Any help would be appreciated.

    I have a D-Link router, and I can provide additional information, such as IP, WiFi SSID, pine, etc., if necessary.

    Hello

    You need to press on you first, WPS option on the printer.

    Please, try this and let me know how it goes:

    1. On the printer control panel, press the button next to Scan, and then press the button next to the Wireless Menu.
  • Photosmart C4780 wireless Mac connection failure

    I, like some others I've seen messages on, will have exactly the same problem with my HP Photosmart C4780 of wireless connection to my MacBook.  I just bought this printer a couple of days with a new iMac (which I have not yet unpacked, yet).  I decided to see if I could go ahead and get the printer works with my Macbook.  Here is a breakdown of the specs, measures and tests.

    1 MacBook OS X 10.5.8 (Leopard) running.

    2. software is installed.

    3. to set up a wireless connection, the "Device unavailable" error appears in a dialog box.  This is the same error that others have had.  He continues with... "The network configuration has been correctly transferred to the device.  However, to continue the configuration of the device in the network, your Mac must have access to the device... ».

    4. I can load the page HTTP for my router (a Qwest Actiontec M1000) and see the IP address of the printer.

    5. I can successfully ping the the IP address Mac printers.

    6. I cannot correctly load the HTTP page to the printer via the IP address and the view that it is different pages.  I can even change some of the settings, however, apparently never really complete updates.

    7. After talking with HP support for more than 90 minutes (after waiting on hold for nearly 45 minutes, not a joke), we arrived at the conclusion that the modem/router must be the cause of the problem.  So, I was told to contact Qwest to get help.  Furthermore, technical support had me through many of the same steps I've seen on other items (for example, reset the printing system, uninstalling and reinstalling the software, reset my router, etc.).

    8 next, before calling Qwest, I decided to see if I could get the printer runs on Windows.  Under WinXP SP2 on a platform completely separate (but), I was able to install the software correctly and successfully a wireless connection to the printer.  I rebooted the machine Windows several times and disconnected the power to the printer just to make the connection is when it was re-powered and rebooted.  And Yes, everything works perfectly on the Windows machine.  It tells me there is nothing wrong with the router (with a possible exception, which I will speak in a moment).

    9. given that the installation worked in the windows box, I decided to call HP.  This time I isn't that hold it for about 20 min.  I told them what the results were in the Windows world, and we proceeded to work on this issue with the Mac for about an hour.  We have made some of the same things, as for the first phone call, in addition to a few other checks.  It simply seems that software on Mac just cannot see the printer, which means that the HP software will be unable to see it as well.  It's very weird because I can still ping and also set up its Web page (on the Mac and Windows machines).  Now technology seems to think that this is a problem with Mac OS because it certainly works with a different OS with the same router.  I'm leaning toward the same conclusion as well.

    10. now for the question of the possible router I mentioned earlier.  I saw in another post where someone says hello.  Something the Actiontec only modems no routing of packets used by Hello.  I have absolutely no idea what the Hello devil is.  I tried to do a little research on this and am still confused as to what it is and what it does.  However, if Hello is something specific to the Mac and has nothing to do with the router itself, then it seems to me that the router had no knowledge of Hello (and certainly would not care).  Therefore, the ability of routers delivers packages for different platforms should not be affected by this Hello thing.  However, this does not mean the packets are not getting lost once they arrive at the Mac because of Hello (again, not knowing what it is).  Now if that's the case, then it seems to me that the problem would be with the Mac (in conjunction with this thing Hello), not the router.

    11. other positions reported this same problem wireless with this same printer using OS X 10.6 (Snow Leopard).  If this is true, then when I finally unpack my new iMac, I expect to have the same problem... we'll see when I am near to it.  If he did not have this same problem, so maybe there is hope if I upgrade my MacBook to Snow Leopard.

    If anyone has any other light to this problem, please let me know what might be the underlying issue, and how can I fix this (if someone already has).  Thank you.

    Finally, problem solved!  Here is the solution, if someone else is facing a similar problem.

    Since I found the IP address of the printer on the Web page of my router, I went in "Print and Fax" system preferences.  From there, I clicked on the sign "+" to add a printer.  Nothing appears in the default tab.  So, I went to the IP tab.  From there, I selected the Protocol for the "HP Jetdirect - Socket".  In the address field, I entered the IP address of the printer.  After a few moments, the printer was found and the field "Print using" is automatically filled with the print driver.  I clicked on "Add", and low and here's the printer now appears in my list of printers.

    The second representative of HP I was working with me had to go through this same series of steps with one exception.  Never, we put the Protocol field.  He was left as default "Line Printer Daemon - LPD".  When this was done, nothing ever appeared.  So, I think that the trick was to change the field Protocol, as shown here.

    I hope this helps those who have a similar problem.  Good luck.

  • Photosmart C4780 wireless do not print wireless

    The basics - old iMac dual core, new Macbook (both with Snow Lepoard 10.6.1,) relatively new Airport Extreme, new printer 'Wireless' Photosmart C4780.

    Installation/set up progresses to a point, then I get the message "network unavailable. The selected WiFi network is not in range of the aircraft. "The 'device' the C4780 sits 3 feet between the router and showing the strength of the signal higher of all networks in the region.  [BTW - the new Macbook would work wireless from time to time until people e-mail tech support HP's suggestion, I have made an adjustment to the configuration of the router.  Now it works again even if the router settings are returned to their default value.  When you attempt to print wireless from a computer, the printer says it is offline.  I talked to Apple support and they advise that if I can get the IP number of the HP printer, I should be able to configure the printers to work.  HP technical support 'Chat', explains the IP number is assigned by the router.  I've given up o HP Webcam live tech support after being on hold for over a half hour, twice.  HP support 'Chat' is almost exclusively oriented Windows and they send me to technical support of HP "e-mail", which sends an email per day reiterating I already took action.  Sorry for the rant, but this forum is my last hope.  Can someone help me? What can I do to get this working?

    Have you deleted and added the printer in the print queue? Let's try it:

    -Sys Prefs, Print & Fax
    -Select the printer in question and click the sign less down the list
    -Select the sign and add it again.

    If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

  • Photosmart C4780 wireless set in place the question

    Hi all

    I tried to implement the Photosmart C4780 to print on a wireless network. I have a pc running Windows XP SP2. When I go through the process of configuring the network device it seems to pass a number of steps with no problems before you throw the following: "the printer attempted to join the network but does not receive any data. This may be caused by MAC address, filtering... "I checked the router settings, router is a Netgear Wgr614 and MAC address filtering is turned off.  I have a number of other devices connected to the network and all have very well connected without tinkering with the configuration of the router.
    When I run a wireless network test, she spends the first 5 criteria (Wirless on, working wireless, found network name, security, printer settings in line with the wireless router settings) before failing on the 6 criteria (filtering on).
    Any ideas...

    Have completed using the USB connection and which works very well but I would like to run without thread if poss.

    Thank you for your help. Neil

    It's fixed now, everything worked Ok once I changed the WEP authentication type router "Shared key" setting to "open system".

  • Photosmart C4780 wireless installation under 10.6

    Well, I have a Photosmart C4780 printer, and I try to get connected to the network. I need to connect it wirelessly because that cable of three feet it came with just do not cut it.

    I have no idea how to connect it. I see nothing on the networks in the software of the printer, and the printer itself menus are cryptic and buggy.

    Any statement of Mac, I can find is for older versions using the real HP software. From what I understand, if I'm on Snow Leopard, I'll use drivers and the software I already have. The sole instructions of Snow Leopard I can find hidden only setting via the USB port.

    Help would be greatly appreciated! Thank you.

    Download the latest version of the software HP here

    Run the program and first have the USB cable connected to the printer, you will come to a point in the configuration where you will be asked if you want to configure the wireless printer.  Confirm the configuration wireless and just the follow through.  You will need to know your wireless network security settings and benefit that your Mac is on the wireless network that you want to use with the printer.  It's pretty simple.

  • Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?

    Hello

    My family and I recently moved and while moving, something inevitably get lost or left for account.  I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me.  I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable.  I have no idea where these things are and have not found them within two months, we've been in the new House.

    I solved the issue of the loss of the installation disk by downloading it from the HP site.  My problem is now getting beyond the USB connection and get the currently installed software.  Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation.  I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.

    Help, please!

    Thank you.

    It's the type of cable you will need (ignore the color of the cable, the ends are the important part).

    Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).

  • Range of printers PhotoSmart c4780 HP; Windows Server 2008 R2 SP1

    Everyone found a way to install this printer on a running Windows Server 2008 R2 SP1 print server, or a work-around pilot?

    Hi JamesRMarvin,

    Follow the instructions below to install the driver for 990c for printing on the server.

    1. open devices and printer

    2. click on add a printer

    3. click Add a local printer

    4. from the use existing port, select the USB option and then click Next

    5. click the button of Windows Update to get all the support window 7 drivers updated

    6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

    7. follow the remaining instructions to complete the installation.

    Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmar C4780 using this driver. I would like to know if you have the same problem?

  • My HP Photosmart C4780 Wireless keeps disconnecting

    Hello

    My problem is compliacted.

    First of all, I can't get my printer wireless using HP Software Setup, I get this annoying error message:

    Your computer is unable to communicate with your printer at 192.168.1.101. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic.

    Your PC cannot communicate with your printer at address 192.168.1.101. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network.

    I have no firewall software, the Windows Firewall is completely off.

    But sometimes (not always) my HP printer must be connected using Wi - Fi Protected Setup push button, then disconnects.

    I installed the latest version of my HP printer software and driver.

    I reinstalled software HP several times.

    I can't access page interal printer by opening http://192.168.1.101

    I use the router Linksys and Windows 7.

    Is there something I'm doing in the router?

    Thank you very much

    Hello

    I replaced the router and my problem was solved, I suppose that there was a problem in the router.

    Thanks a lot for help.

  • New password Wi - Fi and the need to upgrade the configuration on HP Photosmart C4780 wireless

    We got a new Verizon FiOS router through an upgrade and now have the new network name and password WEP. I use MAC OS X 10.10 (Yosemite) and does not know how I can change settings of the printer wireless to match the new router information. I tried to uninstall and reinstall the printer on my computer, even re-installed the software, but nowhere he gave me the opportunity to enter into new free wi - fi connection settings. Any ideas?

    And the FiOS router does not support WPS, so I can't use it, unfortunately. Thank you!

    Hi @8eleven5

    There is! If it already has the software installed on your mac, connect the printer using a USB cable and open the HP folder, inside the Applications folder. In the HP folder, find ad open peripheral utility then the HP installation wizard. Run the wizard and choose the option to Setup wireless via USB.

    If she didn't already have the software installed, use the following link to install the software, plug the announcement of cable USB Setup will guide you right to the installation wizard.

    Once the software has set up the printer to the wireless network, simply add the printer to your 10.10

  • Photosmart C4780 on Windows 7 family

    Had installed HP need to Center and the printer on the laptop and work very well until problems with the format of scanning and printing started occurring. They advised me to reinstall the printer from scratch. remove the printer and the software via Windows configurtation.

    However, when trying to install the full software sownloaded form, the HP support site, get error message window indicating «...» Appdata/Local/Temp/7zS228c/Setup/.../Setup/hpzpnp40... "at the top of the popular window and message"specified file not found"error text. This option is to close the bow of error message, and then finish the installation process.

    No one knows what causes this error and how to fix it?

    Hi btw141,

    Follow the steps below to update the software to the latest version.

    First step: clear temp directory

    1. tap folder in the race or search programs and files of field

    2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

    3. proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1. Download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-71555-3&cc=US&DLC=en&LC=en&os=4063&Product=3794615&sw_lang=

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know what you find?

  • Once I connect my Photosmart C4780 to my wireless network, I lose everything internet.

    My router is a Netgear WNDR3700v3 with firmware version V1.0.0.22_1.0.17.  I can get internet to work on my HP pavilion dv7 with windows 7 64 bit, my smart sony TV, my xbox 360 and a phone that I connect to my wireless router.  The second, I configured my HP Photosmart C4780 wireless router I lose internet on all devices.  I can connect to the router again but can't get out to the internet. What would be the printer could prevent me from accessing internet?

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • Problems connecting my computer to my wireless network when Photosmart C4780 is connected

    Hello

    I recently bought a new printer Photosmart C4780 wireless. It works fine via USB, but I seem to have problems when I try to set up with my router.

    Here's what happens:

    First of all, I run the Setup on the CD supplied with the printer (while connected wireless to my network).  I am going through the different steps and after Setup finds my network settings to give to the printer. After that, the Setup program tries to find the printer on the network.  It goes very well for about 4 or 5 seconds while the printer connects to my wireless... but then, once the printer connects, my computer disconnects causing an error Setup can not communicate with the printer because I'm not connected to a network.

    What is going on?

    If anyone can solve this problem for me, that would be amazing and be a great help!

    Chuck

    I'm sorry to say this but there are problems between SMC routers and HP printers.

    Search this forum MUCH info on the subject.

  • HP photosmart C4780: Hp Solution Center

    I have recently upgraded to Windows 10 and now I can not scan from my computor using HP solution center app as before in windows 7. I tried several times following the instructions from HP. A problem in trying to uninstall the existing software, it will not be completed. When I try the solution Center HP it says that the software did not complete the installation. What is a windows problem or HP?

    @Research1,
    Welcome to the HP community!

    I hope I can help you with the problem you're faced with uninstall and install your Photosmart C4780 on Windows 10, such that the software displays an error message indicating something of the order of "HP Solution Center cannot work because your installation of the device is not complete." Here are my ideas for you to try!

    #1

    • Perform a level 3 uninstall if you have an HP computer or a level 4 uninstall if you have a computer not HP.

    1. click on start and type %temp%, enforcement

    2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

    3 open the Util folder

    4 open the CCC folder

    5. If you have an HP computer, run L3uninstall.exe (or the .bat file). If you have a computer not HP, run the L4uninstall.exe

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads .html

    9 download drivers and full software functionality again, or run the HP printer install Windows Wizard to install the printer

    10. run the download to reinstall the printer and try to open again the HP software

    #2

    Run the print and scan the doctor. This diagnostic tool will check for all the conflicts that could be the cause of the problem and are working on fixing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

    #3

    Scan a System File Checker to repair corrupt files sytem: run the command SFC to repair system files

    #4

    Run a disk check: running CHKDSK in Windows 10

    I can't wait to hear the result on your part, and I hope that my ideas are useful!

    If you want to testify of my answer to help today, click on the thumbnails below and if these steps help you to find a solution, click on the button "Accept as Solution" if others in the community can easily find our messages.

  • Cannot connect to my wireless HP Photosmart C4780

    Evertime I try to connect my HP Photosmart C4780 to my wireless network, I get this message:

    "Your computer is unable to communicate with your printer at 192.168.1.127. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic.

    Your PC cannot communicate with your printer at address 192.168.1.127. Check all cable connections. Check that the printer and the PC and the router are powered on and connected to the network. »

    I tried to disable my firewall and that did not work. All the cables are connected and is turned.

    OS: WIndows 7

    Wireless router: Cisco series router Linksys E1000

    -Elliott Crouch

    OK, let's check some basic first things.  Are you printer connected to YOUR router or your PC?  Print a Test of the network wirelessly from the configuration > network area of the front of the printer.  There, it will tell you the name of the network to which it is attached.

    Compare the IP address to your printer.  Is - it the same, except the last numbers?

Maybe you are looking for

  • 10.6.9 to 10.9 on iMac upgrade

    Hi, can I upgrade my OS X (currently 10.6.8) 10.9 on my iMac? The computer keeps telling me that there is no new update. Please notify. Thank you. Here are the specs of my iMac Model name: iMac Model identifier: iMac12, 1 Processor name: Intel Core i

  • Factory unlocked iphone 6s gives error sim not supported

    Hey guys I recently bought a new iphone unlocked factory 6 sec New York, and he has not used in the States. Now I'm back in my country Pakistan, and it does not recognize the sim card I inserted even if it supports an iphone officially. It gives the

  • How to print dvd labels

    How to print labels from dvd hp 1400

  • Not able to install the Windows Update in Windows XP.

    Original title: can someone please tell me how do to download updates fail when I try to download them from the microsoft site What is the problem with that?

  • printer keeps displaying 'in paper '.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: Printer Now, except for the test pages, it keeps showing the error message "printer paper". Replaced ink cartridges Connected to HELP