HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

Similar Questions

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Solution Center does not correctly install Windows 7 64 bit

  I've looked everywhere on the forum about this but still do not have a resolution.

  I have a HP Photosmart C7280, I've had two or three years.  When it is connected to an XP machine it worked fine.  I have since bought a new PC running Windows 7 Home Premium 64 Bit, and although I tried over and over, install, uninstall and reinstall the software from the HP Solution Center, I can't work.  I really need to have the feature analysis of the Cluster Solution that I need to scan documents up to 100 pages.

  Is it possible that this software is not compatible with Windows 7 64 bit?  I downloaded the software later on the site of HP and my PC works always the latest updates of Windows 7.

  If I can't get this resolved, I'll have to buy a new printer all-in-one and believe me it will not be a HP this time.  Help, please.

  Please see below for more details.

  Here is the log of the error:

  

  Here's a sceenshot of the error:

  

  I followed the steps listed below and have had no luck.

  Click the Start button and type %temp% term or search programs and files of field

  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  Step 2 - download and extract to your system:

  1. Download latest features full software and drivers for your printer from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-71555-3&cc=us&DLC=en&LC=en&...

  2. once the download is complete, double-click the file to extract the software.

  3. once the extraction is completed, and the installation window opens, press the Cancel button to stop the installation

  4. click on the Start button and type %temp% term or search programs and files of field

  5 find and open, starting with 7z folder (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window (all your open windows), then in the middle of the desktop right-click of your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/?promoid=JZEFT

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Well I'm done chasing my tail.  It is clear that this is never going to work.  I tried to do the installation on another machine in 64-bit Windows 7 (gateway GT5228) which was a clean install and never had a HP product installed on it before and she's not exactly the same way.  I also tried a XP operating system installation and it works beautifully.  So my conclusion is that developers at HP simply no interest to this provision on Windows 7 64 bit, or they are simply too incompetent to make it work properly.  I am a software consultant in real life, and I do installations on servers is not as if I'm inexperienced.  I decided to buy another printer, but after this experience, it will not be a HP.  It is not just that a printer that works very well mechanically must be thrown on the junk-pile because the software cannot be upgraded successfully.  HP is not very favourable to the environment, creation of garbage where it could be avoided.  Sad and disappointed.

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• Solution Center does not work under Windows 7 with Officejet Pro L7780

  Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

  Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

  Installed everything, but when you run the solution center it says it can't open because incomplete installation.

  The printer works from Windows 7.

  I have an XP machine and Solution Center working on it.

  Any suggestions anyone.

  This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

  The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

  Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

  Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

  I don't know how the setup.exe uses solutioncenter.msi?

  The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

  If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

  I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

  Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

  Add these entries (click new...) for the owner user variables and System variables:

  In the name box: APPDATA

  In the value box: %USERPROFILE%\AppData\Roaming

   

  Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.
  

   

  Thanks for all help on this.
  

• I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

  Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello judieKay

  Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

  Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• HP Solution Center does not work and I can't download it despite many trials

  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello todd999

  Try instead these instructions:

  Follow the steps below to rub the software and then reinstall it.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers
  Photosmart C7250 software (Windows 7)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• Game Center does not work after update to ios9.2 also the games who need freezing when loading so I can't play you can solve this problem, so I can play games on my ipadmini2 again?

  Game Center does not work after ios9.2

  problem known, search the Forum, many details.

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• My on-screen keyboard does not work on Windows 7-32 bit...

  My on-screen keyboard does not work on Windows 7-32 bit...

  It displays error "could not start on-screen keyboard.

  Please help me and tell what to do...

  Hello

  • It worked before?

  I suggest you follow the methods that can help you reslove the problem below.

  Method 1:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can also try to disable and enable the on-screen keyboard and check if it works well or not. So follow the steps:

  1. Press the Win + U keys together to launch the accessibility.
  2. Then click on "Use the computer without a mouse or keyboard" (probably the 3rd option in the list).
  3. Then on the next page, uncheck the box that says "use on-screen keyboard.
  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur.

• Cisco Anyconnect VPN does not work in windows 7 64 bit

  Hello
  I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
  The vpn is connected, but there is not any internet access.

  I tried to solve the problems of:

  -Disabling the firewall.

  -disable the anti-virus etc.

  But while I tried using with 32 bit, it works very well.

  Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

  Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

  Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.