HP Photosmart D5460 printing problem using the cd/dvd tray

Similar Questions

• phtosmart C5240 all-in-one will not use the cd/dvd tray to print

  OK, so I use essential 3.5 photo to print directly on printable CD. Whenever I try to print, the printer tells me to close the CD/DVD tray, but when I do that, it starts printing the status bar with plain paper. Any suggestions?

  Also connected to the pc via usb and runing win7

  Nevermind found the problem, I myself do not select the type of media correct sorry.

• Printing problems using the new premium photo paper more HP

  Unable to get the recent HP Premium Plus photo paper to print in my Photosmart always reliable 4780... tried to print using today our new of OfficeJet Pro 8600 and it would print in it either. This paper feels very different to me, and it seems that the paper is too smooth to be taken over by the printer. Ideas?

  Followed by all your links-made all tests... printed on several types of different paper... refine results... Put the new HP Premium Plus paper in... same old problem nor my 4780 or the new 8600 will feed this scum thru.

  Thanks anyway...

  Diana

• Photosmart 6520e: print photos from the photo tray

  HP Photosmart 6520e - when I try to print photos from the tray photo here is what is happening. I empty the 8 1/2 X 11 (big) paper tray pull the photo tray properly load 4 X 6 photo paper and close the guides for focus media. Push the tray (s). When I try to print, I get the message that it is paper. EVERY TIME!

  If I load photo paper in the paper tray size, Center it with the guides and close the bins it will now display the peak (s). But it won't print from the photo tray, said always with paper. Prints only from the main paper tray. What's wrong?

  Thank you

  Hello @barnstormer37,

  I would like to help you today with the message 'in paper' that you get on your Photosmart HP 6520 e-all-in-one printer when trying to print photos from your Windows Vista computer to the photo tray. I understand that you are able to print from the main tray end, and you load properly all of your photo paper in the photo tray. At this point, it does not sound like a configuration problem on the computer. You usually have to "say" what paper tray it will be the power to the printer through your print dialog box. If the tray is always set to the main desktop tray when you want to print from the photo tray this will result in a "paper" message like your printer "think" it is supposed to print from your main tray empty. Please follow the steps below to make sure everything is set as it is supposed to be.

  For your reference I'll start providing you with the "loading paper" documentation for your product. This documentation is also useful if you decide to print envelopes as well.

  Loading paper and envelopes for HP Deskjet Ink Advantage 6520 6520 Photosmart e-All-in-One Printer Series

  Once your photo paper is loaded, I'll make you do a test print to your printer from the photo tray. Because each program is slightly different when it comes to printing, I'll start by providing you with the steps to print correctly in the Windows Photo Gallery program as it is specific to photo printing.

  1. Windows Photo Gallery by clicking the Start button
  2. Click on all programs
  3. Select Windows Photo Gallery
  4. When Windows Photo Gallery opens, choose the image you want to print
  5. On the toolbar click print, and then click print again
  6. In the print pictures dialog box, select the printer, paper size, print quality, print system, and number of copies to print.
  7. Click on the Options at the bottom right for additional print options. Ensure that the paper tray is set to the Photo tray.

  Once the adjustment options and the plateau have been confirmed as being correct, please try to print.

  Please let me know if the steps I have provided resolve your printing problem. Should receive you 'in paper' messages in another program, please let me know which program you are printing from. Good luck!

• HP Deskjet 3540: Unable to print documents using the HP Deskjet 3540 (network)

  I am printing documents using the HP Deskjet 3540 of difficulty.

  All options in the print dialog appear to be blocked.

  I've uninstalled and reinstalled the software nothing works. HP Print and Scan Doctor offers no help.

  Screenshot below

  Any help would be greatly appreciated.

  

  X-23 you are the boss.

  I followed your steps and was able to print a test page for Word, PowerPoint and PDF. I also printed a picture on plain paper in full transparency. I was also able to quickly implement the project and printed without a problem.

  I have not tried to print a photo on photo because of the low ink level paper but I'd be surprised if I'm not able to.

  Thank you for your kind and your patient attention to the problem I was experiencing.

  It's really appreciated.

  Prosperous 2015 for you and yours.

• My Vista computer has ceased to be able to print or use the windows photo gallery, or to be able to perform updates.

  Original title: non-functional computer

  my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install service pack 2 for vista and it wont let me download a update Internet explorer 9 - also stop the program index - continues and the print spooler said it works but it doesn't will not print - any ideas?

  Hi John,.

  1. you receive messages or error codes when you try to print or to use the Windows Photo Gallery?

  2. What is the code of error or message that you receive when you try to install service pack 2 and Internet Explorer 9 download?

  3 did you recent hardware or changes to the software of the system?

  You try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Automatic stop when you use the CD/DVD on the 1900-803 Satellite player

  Ive had problems with my 1900-803 for the last 3 months. whenever I use the cd/dvd drive, my laptop turns off without warning after 15-20 minutes. It also stops if I try and play all the video files or scan my hard drive for viruses or spyware. is it because of overheating or any problem with drive

  Hello

  I don t think that the player is responsible for the unexpected shutdown.
  In my opinion it s an overheating problem.
  Well, there could be several reasons for overheating problems, but usually dirt and dust inside the laptop is mainly responsible for overheating problems.
  I recommend to check the cooling modules if they can work properly and then try to clean.
  I use the vacuum cleaner to clean the fans on my laptop. Check this possibility.

• Blue screen when you use the CD/DVD on Satellite L30-105 player

  I have a Satellite L30-105. Recently when using the CD/DVD drive, it began to crash (blue screen) after playing a DVD-video or a music CD.
  Either way, I seem to only get playback of DVD-video and not the main sound track. Does anyone have an idea what may cause these errors.

  Hello

  To my knowledge, the blue screen starts if there is a serious software problem or if some of the equipment is malfunctioning.
  I put t believe that this blue screen error message can be caused by a defective CD/DVD drive.

  Hmm, according to your message and you can not hear the main sound and cannot read music CDs, I think that this problem could be linked to the sound card.

  In the first case I recommend updating the audio driver. If this does not help, try to recover the laptop with the supplied recovery CD and check if the same thing always happens on the new BONES recovered. (Don t install any 3rd party application).

  Good luck

• Satellite L300-1BW - can I use the recovery DVDs?

  is it possible to use the recovery DVD on my laptop TOSHIBA L300-1BW without any recovery / hidden data on my HARD drive?

  As I want to update my player running more space

  Hello!

  I don't know if I understand your question right, but you can use the recovery disk for your laptop on every time Mr. He s not depending on the partition or HARD drive.

  For example, when you replace the HARD drive, you can install the laptop using the recovery disk.

  I hope I could help a bit.

  Good bye

• The CD/DVD tray on my eMachinesT3616 will not open.

  The CD/DVD tray on my eMachines T3616 will not open.  Solution?

  Hello

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Using a Photosmart C310a cannot print photos from the photo paper tray. With the help of Mac Lion

  When you print photos using a C310a Photosmart on a Mac with Lion. I cannot print on paper photo from the photo tray. It keeps or by default in the paper tray.

  Any suggestions

  Hello...

  Please try these steps... it might solve your problem...

  1. go to mac apple icon-go to the software update - pls download and install the update.

  2 restart the pc - and then go to the new apple icon - go to System Preferences and continue to print and scan

  3 Higlight your printer, then click on the button "-" to remove the printer-if your connected USB printer please unplug USB cable - then restart your pc

  4. after the restart, return to icon - system preferences - apple print and scan-for usb connection: plug the USB - if your printer does not automatically appeared on list of the printer olease, click plus the sign and Higlight your printer then click Add button - after that - to prove the fucnctionality

  for a wireless connection - simply click on the sign more, then, HELLO - Higlight your click and select printer Add button - then prove the functionality if you can print and scan.

  Hope it will work for you...

  Please click on that button KUDOS if I solved your problem... Thank you! more power! =)

• HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.

  I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
  I tried selecting the main tray by default and will not work.
  With the help of hp photosmart 7525

  Hello

  If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.

  To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.