HP-Photosmart-Premium-C309g-printer/print head

Similar Questions

• Photosmart Premium C309g - print in color, not black

  I have a Photosmart Premium C309g which, until a day or two before, worked very well. Black ink does not work.

  I tried already. .

  • Change both black cartridges (regular and photo)
  • Cleaning
  • Alignment (when I try to align printer says "Alignment failed."

  Print fine - but not black color.

  Problem happens both when printing from a computer, as well as select black copy then copy - gives only a blank page.

  Printer on a network and is used for both Mac and Windows 7.

  You can give me any help would be appreciated.

  Thank you.

  Try the suggestion in this thread to soak the printhead.

• C-309 g HP Photosmart Premium: Incompatible print head - new cartridges for C309g

  Cleaned all the contacts on the print head as shown on the HP website that I wasn't getting any 'black' to get out.  All other colors worked very well.  Noticed that there is a generation of black ink on the print head upward.   Put everything in.  It did the alignment, but he does not terminate.  I had a recording error to restart the printer.  This and now I have and incompatible print head message.  Open a new ink cartridge and I still get the same error.  In addition, all went out again and verified, and there was ink black build-up on the contacts on the print head again.  Any suggestions?  Ink cartridges HP isn't some off the mark.

  Try these Youtube videos.

  https://www.YouTube.com/results?search_query=C309g+PRINTHEAD

  Find out more if necessary.   If this does not work, your printer is toast.

• No black on Photosmart Premium C309g print

  Is my regular black ink stopped printing completely.

  I changed the cartridge and it will not print or copy of black.

  The printer also gives an error message when trying to align the cartridges.

  Thought that the cartridge may be faulty but tried a second without change.

  Otherwise, the printer responds to commands and prints with color inks but no black (no picture).

  Help, please!

  If the printer is on a guaranteed thing might be worth the time soak the print head, as described below...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Can you let me know if it works?

  Thanks, Ciara

• HP Photosmart Premium C309g: 10 Windows printer driver for HP Photosmart Premium C309g

  Where can I find a Windows 10 driver for HP Photosmart Premium C309g printer?  I tried the Printer Wizard and it didn't work.  Thank you

  Thanks, it worked!

• Landscape problems printing on my HP Photosmart Premium C309g

  Hello

  Excel 2007 on my HP Photosmart Premium C309g print it will not print anything in landscape orientation.  He spotted print correctly, but when you send it to print it it transformed into portrait and prints only about 1/4 of the information sent (essentially the first two columns) in a slightly stretched way that makes running along the entire page.

  I am running Windows Vista Home Premium 32-bit (Version: 4.0.0.7 @ OS: Windows Vista Service Pack 2)

  The printer software version is: 140.000.000.000

  The firmware version is: WHM1FN0931BR

  The printer driver version: 70.101.203.0

  I tried to recreate the document and change various settings in Excel, but nothing helps, she always print previews just like it should print, but then returned to Portrait orientation when the printer she spits and displays only 1/4 of the information.

  I found a few other places posted online where people have the same problem, but no solutions to the problem.  Can you please help me with this?  Anyone?  Thanks in advance to anyone with a suggestion that solves this problem!

  LAST UPDATED... IF ALL GOES WELL!

  The following steps appear to have solved the problem.  I've recreated the worksheet that was giving me problems with alignment issues and it prints fine now.  Must have been a problem of conversion of an older version of Excel which caused maybe.  But I have now printed a few different worksheets in the landscape with success with my connection wireless with the following parameters.  Hope this works for you if you find it and need a solution.

  Click Start > Control Panel > printers.  Then right click on the printer icon > click Properties > click on the Advanced tab > Select Print directly to the printer.  Click apply > OK

• HP Photosmart Premium C410a: printer not printing black

  Printer prints is not black.  Cleaning print head.  New cartridges, printhead replaced, will be always not print black.

  Try these videos Youtube here.

  https://www.YouTube.com/results?search_query=Photosmart+premium+C410a+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• Photosmart Premium C309G Linux compatible?

  Is the HP Photosmart Premium C309G printer compatible with Linux?  Compatibility Linux is a test before I buy a printer, and I'm curious to know.

  I note that similar (but not identical) model C309A is compatible, as shown here: http://hplipopensource.com/hplip-web/supported_devices/photosmart.html if the C309G has the same level of compatibility as the C309A, I'll be happy... but it is not clear to me if the C309G can use the same driver HPLIP/CUPS/Linux as the C309A.

  I am an openSUSE user and reasonable familiar with Linux.

  In fact, there are very good support for the C309G.  I just bought a plus earlier today and have set up with Ubuntu 9.10.

  You must use HPLIP.  Ubuntu 9.10 seems to come with the 3.9.8 version.  I manually installed 3.9.10:

  1. go to http://hplipopensource.com/hplip-web/install_wizard/index.html

  2. Select your Linux distro and version.

  3. for the type of printer, select "Photosmart/Photosmart Pro".

  4. for the model of the printer, select "HP Photosmart Premium all-in-one Printer Series - c309g" (it took me forever to find in the selection list)

  5. click next to download HPLIP, even if she tells you your distribution includes a version that supports your printer

  6. click Next again to download.

  7. click on the button download HPLIP.

  8 follow the instructions ("' sh hplip - 3.9.10.run", essentially ")

  Do not work as root or with sudo.  You will be asked your password later.  Among other things, the installation script installs all needed packages, including XSane for scanning.

  I really appreciate the support HP for Linux here, and it's one of the reasons why I continue to purchase HP printers.

  -David

• Photosmart Premium C309g: Support ePrint?

  Hello

  I have a HP Photosmart Premium C309g printer. This printer supports the new ePrint feature? The printer installed a few days ago a new firmware and a report printed after installation. I looked in the settings menu of the printer, but I couldn't find any setting ePrint.

  Greetings,

  Philippe

  The link above for the ePrint Resource Center doesn't seem to work.  Please try this link if you need more information.

  http://h30495.www3.HP.com/

  Thank you!

  Tara

  * Even if I am an employee of HP, I speak for myself and not for HP.

• HP Photosmart Premium C309g do not print black ink

  Hello

  My HP Photosmart Premium C309g (CD055A) will not print black ink even if the cartridge is full. He's going through the motions of printing but the pages come out blank. It prints colors, they are not as dark as before, so I know that black is not working. I have cleaned the print heads, turned off the printer, unplug the printer, restarted the computer, but nothing works. I get colors on the report of the print quality, but the printer status report comes out blank. I bought a new black ink cartridge (564XL) think the previous one was defective (levels showed a 75% ink) but I still have the same problem. Any suggestion would be appreciated. Thank you.

  Hey,.

  I see you have done some troubleshooting on the issue of the print quality that you are experiencing.  I would make sure you did all the troubleshooting steps available for your research problem in the document following the link.

  Print colors are the colors should not when the C309 Photosmart Premium printing.

  If you have completed all these steps, then I check the status of your printer warranty.  If it is out of warranty, you should consider the solution provided by Bob_Headrick in the thread found here.

  Hope this helps,

  Jason

• HP Photosmart Premium C309g-m: color ink not printing...

  Hi, I have problems Printhead and cannot print in color. This, I thought was similar to a problem where the black was not printing. The link that is HERE. I cleaned and soaked the printheads to 2. IN hot water for 10 MIN then dried on the print head and I'm waiting for the results.

  As I was cleaning I found an accumulation of black ink. I had cleaned it and soaking got rid of every trace of it.

  So is there anything else I should do? The printer is a: HP Photosmart Premium C309g-m

  Thanks for your time and your support!

  As the author of the post you referenced , I would say through all stages, including the verification that the vents are disposed of properly.

  You can also go through the steps of troubleshooting in the paper here.  Print a page of diagnosis as on the Six Solution and repeat the printhead, cleaning of the façade or the Toolbox.

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• Photosmart Premium c309g-m: cannot print from word and excel files

  Hello

  My question previous (25/02/2016 09:44) problems with the HP Solution Center has been resolved today - I can open the program and I can scan.

  But now I can not print word and excel files - the paper is completely empty. I can print emails from google, but they are difficult to read.

  In Control Panel, devices and printers, I have until now had a HP printer: HP0BAC44 (HP Photosmart Premium C309g-m) but now I also have the printer: HP Photosmart Premium C309g-m (Standard). Who would have something to do with the problem? I tried printing from two of them, but the result is the same as mentioned above.

  Can you help me please?

  Thank you

  Peter S.

  Hello

  Bought a new printer (Envy 5646), and all my problems are solved.

  Thank you

  Peter S.

• printer photosmart premium c309g set up failed

  My HP photosmart premium c309g (wireless connected to the network) is visible on my laptop but not on my computer by cable with windows xp, at least not by the HP software I have installed. When I enter the ip address of the printer in my browser on the xp machine, it opens the Web page, and everything seems fine.

  When I add a new device with the HP software it saids "printer is detected", but after a while, I get the message: in Dutch: het instellen van printer is mislukt, translated into English (I Think) "the implementation failed.

  The printer used to work on the computer. I don't know what I did so that it stops working. To solve the problem, I uninstalled the software and installed it again. The problem still exists.

  I tried the hp doctor. The printer does not appear. (The software showed a usb printer which was not connected at all)

  Is there a solution?

  Thank you

  Hi adst.

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-73652-3&cc=US&DLC=en&LC=en&os=228&Product=3793676&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-73652-3&cc=US&DLC=en&LC=en&os=228&Product=3793676&sw_lang=

  10. run the download to reinstall the printer

• HP Photosmart Premium - C309g and it stopped printing in black (but prints color)

  Hi my HP Photosmart Premium - C309g and it stopped printing in black (but prints color). I tried: -.

  1. print test page - empty outside the windows logo
  2. Turning the power on and the
  3. programs form printing.

  Both black cartridges are full.

  printer is 3 days on 1 year warranty!

  I'm not very technical, so easy solutions would be preferred.

  Thank you

  Try the solution in this thread to clean the printhead C309g.