HP printer Deskjet 2640 series: fax

Dear Sir.

I got the HP printer Deskjet series 2640.  I loaded original print - upward in the ADF, but sent fax was totally empty. Please specify if the original print - side must be kept down in the ADF.

I look forward to your return expeditiosly.

Kind regards

Devinder Kumar,

electronic mail; [Personal information]

@Jindi

Jindi wrote:

Dear Sir.

I've read page 34 of the user guide which specifies that the print to the top side should be loaded into the ADF, but it does not work. Please review & confirm how the print side must be loaded in the ADF, upwards or downwards.

Kind regards

Devinder Kumare-mail; [personal information]

Place a sheet of the faxed document glass, print side down, and make a copy.  If the copy comes out blank or if the copy is hard to read, the likely faxed version no longer works.  This could be the result if the document by fax is on yellow paper or other (perhaps) due to the low contrast.

If the copy is good, take this printed copy and put it in the ADF, side to the top and make a copy.  Evaluate the results.

When you see a post that will help you,

Who inspires you, gives a cool idea,

Or you learn something new.

Click the 'Thumbs Up' on this post.

Fixed / responded? Click this post accept as Solution to help others find answers.

Tags: HP Printers

Similar Questions

  • HP printer 2640 series: fax - multiple Pages

    Dear Sir.

    I'm going to 2640 HP printer series with installation of fax. I wish to send multiple pages through a fax.  Please intimate how that's possible.

    I look forward to your return soon.

    Thanks & best regards,

    Devinder Kumar,

    E-mail: [personal information deleted]

    Hi @Jindi,

    Welcome to the HP Forums!

    I noticed your post you are trying to send multiple pages using the fax, with your printer HP Deskjet 2640. I'm happy to help you!

    Please, try the steps in this guide, sending a fax, in the section send a fax from the ADF.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    Hope this guide helps!

  • HP Deskjet 2640 series: Error Code

    Dear Sirs,

    I was faced with a problem with my all in one printer HP Deskjet 2640. Specifically, the printer suddenly showed an indication of error on the screen and refuses to print, reset or accept all orders by the laptop. The error code displayed is as follows:

    Error code

    OXC4EB11C9

    C HW_MICCI2

    As there is no indication of the error category (i.e. ink, cartridge printer software drivers etc, I am unable to determine the source of the problem. I would be grateful if you could throw some light on this subject.

    Thanking you in advance

    Hello emandal,

    Welcome to the HP Forums.

    I see that you have a problem with the error code "OXC4EB11C9".

    Please click on the following link which deals with HP monofunctional and printers multifunctional - an alphanumeric Code (' example: ' 0 x ' r 'C2...) ") displays on the front panel when printing.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

  • 2013 installed QuickBooks, the printer Deskjet 4100 series offline

    I just installed quickbooks 2013 on my thinkpad, running windows 7, and therefore my hp deskjet f4180 printer is spent in offline mode and will not work. I stoked market several times. I uninstalled and reinstalled the printer. I unchecked the "use offline" button printer. The printer shows as default and printer as "ready" in "devices and printers" can anyone help with this problem. It is certainly related to the installation of quickbooks. Oh, and I also updated and reinstalled quickbooks and tried to update the drivers of printer... no help. Today I powered off and on again, the computer has detected the printer and automatically updated and it installed (even though it was already installed) and I was able to print an invoice in quickbooks and the printer is new offline and no repeat my previous steps will bring it. Help, please...

    Hi Dylan,.

    Method 1:

    Run the hardware and devices Troubleshooter and check if that helps:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    I suggest to refer to the article and try to run Diagnostic tools:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3177566#N474

    Method 3:

    Check the link and see if it helps:

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&DLC=en&LC=en&product=3177566&tmp_track_link=ot_search

  • HP 2640 series Deskjet printers: the printer does not

    Dear Sir.

    I have printer HP Deskjet 2640 series, n ° S.

    CN3AH2GHGV0601. My printer is not working as it is reported as

    Brother DCP-116C. How to connect the printer to the right? How

    reset the settings as well from fax in order to make the printer & send fax functional?

    Kind regards

    Devinder Kumar.

    Hello

    Download and run the utility HP Print and Scan Dr. link below to solve the problem.

    www.HP.com/go/Tools

  • DeskJet 3900 series: what then I do with my printer hp deskjet 3900 Series, since there is no driver for windows 7?

    I need a software/driver to use my printer deskjet 3900 series Windows 7; HP and Microsoft should help me please

    Thank you

    Well, I found this.

    http://h30434.www3.HP.com/T5/inkjet-printing/HP-DeskJet-3900-drivers-for-Windows-7-operating-system/TD-p/760507

    But the document is no longer available.  Printer must be very old.

  • HP 2640 series Deskjet printer: HP printer setting time

    Dear Sir.

    I had series of printer HP Deskjet 2640, s. n.

    [Personal information]
    . The time displayed on the printer

    won't. How can I reset the time on my printer?

    Kind regards

    Devinder Kumar.

    E-mail: [personal information deleted]

    Hello @Jindi,

    I would like to help you today with correctly configuring the time on your HP Deskjet Ink Advantage 2640 series All - in - One Printer. Can I please you follow the steps below.

    1. On the front screen of your Deskjet tap the down arrow until you see Preferences
    2. Select OK in preferences
    3. Arrow down until you see the Date and time
    4. Click OK on the Date and time
    5. You must first confirm that the Date is correct. Once the date has been confirmed, you will then be able to set the time
    6. Select OK to save your changes

    Please let me know if this procedure works for you. Good luck!

  • HP Deskjet 2640 Jet advantage: printing without margins

    I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
    If possible, I would like to know how to set up the printer for such an impression.
    Thanks for the help

    Hello

    Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

    http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

    Kind regards.

  • My iPad 2 can't find my printer deskjet 3050 J610 series wireless

    Hello. My iPad 2 can't find my printer deskjet 3050 J610 series wireless. Can I do anything to make it work?

    According to the list of compatible wireless Apple printers, support is the deskjet 3050 a. j611a is there something I can do? Some driver?

    Thanks for your help

    The Deskjet 3050 isn't compatible Airprint as mentioned above.

    In order to print wireless from your iPad, you need to use the HP ePrint home & Biz application:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • Photosmart Premium c309a series - will print but scanning and fax are not in printers and Fax preferences

    Any expert out there?

    I already posted this problem.  I deleted Photosmart Premium C309a [OEFC74} of the preference of the "Print and Fax" system on my desktop Mac running OS 10.6.8.]  I deleted it to correct a mistake, "Printer offline", when the printer was offline but would not.

    I then added in Photosmart Premium C309a as instructed.  He has fixed the "printer offline" problem, but now the scanner icon disappeared from "Print & Fax" and I cannot scan documents.  I've always had to scan from my computer, not the printer itself, but I've lost this ability.

    Before deleting the printer in the printer list, I had two icons of the printer: Photosmart C309a series [OEFC74} and Photosmart C309a [192.168.1.5.]] (Fax) listed.  Now, I have one with a different designation, simply Photosmart C309a series.  I had to spend two laptops to this designation of printer in order to print using these laptops (all Macs).

    The all-in-one printer is connected wireless via a home network using a wireless router.

    HOW to bring back the ability to scan?  I spent hours on this forum without finding a solution.

    Thanks for any help.

    Radio of your printer may have indeed failed, and it is not uncommon with this model.

    Try to reset it to put off the printer, then hold him down # and 6 keys while and for a few seconds after I turn it back on.  If the radio is just when, this should fix it.  If she suffered a hardware failure (such as a circuit board) cracked, this will not fix it.

    With this model, you can also connect it to your router with an Ethernet cable and have the same functionality available for all devices, including those who have connections to your router wireless.

  • need to find the printer driver for HP deskjet D2460 series...

    need help to find a printer driver for my HP DESKJET D2460 series... have no original disk...

    Surely you would visit the HP website > support > downloads for your specific model

  • DeskJet 1000 J110: Deskjet 1000 Series Windows 10 J110

    After upgrade Windows 10 Windows 7, my printer Deskjet 1000 J110 Series is not recognized. Download full feature software, or basic driver has not solved the problem.  This model benefits all for Windows 10?

    Your printer must be supported in Windows 10. This doc may help:

    After Windows 10, upgrade of printer problems arise.

  • Recent update for my HP Deskjet 3510 Series does not install

    The recent update for my HP Deskjet series 3510 printer will not install.  I tried the store several times and get the same error on the result: recent installation updates unsolved problems.

    The update is called: Hewlett Packard Imaging Null Print HP Deskjet 3510 series.  The error code that comes up is: 80070490.

    I am running Windows 8.1 and use HP Pavilion g7 - 64 bit laptop.

    Can someone help me?

    Hello Redjerseylinda.

    I understand that this update of the printer is not installed. I will do my best to help you, and there are a few options to consider:

    You can skip this update and all other HP updates. Updates are not essential in the slightest. If that's what you want to do, you can uninstall HP updates from Control Panel, and then restart the computer.

    If you want the update has been installed, you must uninstall and reinstall the printer software. You may use the software update to install this update.

    Please answer as soon as possible. I'm only here to help!

    Mario

  • HP Deskjet 2544: HP Deskjet 2540 Series not found - Error Message

    Hello

    I'm getting "HP Deskjet 2540 Series not found" - Error Message When I tried to scan...

    I have recently upgraded to windows 10. I get the same error message when I trobleshoot using 'doctor print and Scan '.

    Please fo help me solve this problem...

    Thank you...

    Hey @HpUser83,

    Welcome to the Forums of HP Support!

    I would like to help you today to resolve the 'HP Deskjet 2540 Series not found' scan error you get when the all-in-one printer HP Deskjet 2544 scanning to your computer Windows 10. There is probably a software or driver error occurring. Can I please you follow the steps below to resolve this error.

    If you use a USB cable between the printer and the computer connection, please unplug this cable now.

    Step 1: Remove the driver:

    1. click on the Start button

    2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

    3. click on programs and features to launch the window.

    4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

    5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

    6. then, click on the menu start of new

    7. this time type devices

    8 click on devices and printers to launch the window.

    9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

    10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

    11. click on the drivers tab

    12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

    13. Select delete the driver only

    14. Select OK

    15 click apply and OK in the print server properties window.

    16. close devices and printers. Please proceed to the next step.

    Step 2: Remove temporary files:

    1. click on the Start menu

    2. type run. Click on Run to launch the run dialogue box.

    3. tap folder in the run box, and then click OK

    4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

    6. close the Temp folder when it is empty

    7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

    Step 3: Install the device:

    1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
    2. Once the download is complete, follow the prompts on the screen to install your printer
    3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

    Once the installation is completed successfully, please test scan.

    Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

  • Compatibility printer Deskjet 5650 with victory. 7 OPERATING SYSTEM?

    My Hp Deskjet 5650 printer will work with victory. OS 7 Pro? If so, are there any special requirements?

    Thank you, Sean... .a but no cigar. My 7 Pro 64-bit OS recognizes my DeskJet 5650 and it seems that the default printer in devices and printers. However, when I print a test page I download the 4 c/Hp logo nice and sharp, but the rest of the test is reflected in the parts as follows:

    1st page: logo only; »

    2nd page: white

    page 3: "Congratulations!" only

    page 4: "If you can read this information, you have correctly installed your deskjet 5600 series (HPA) on your PC - Sam." Followed by name, rank, including the serial number "Port (s) name: USB001, RAW, nom_lecteur Data Format: UNIDRV.» DLL... Driver version: 6.00, environment: Windows x 64,... Additional files used by this driver:

    C:\windows\system32\spool\DRIVERS\x64\3\HPZEVLHN. DLL (61.053.25.9)"and then the last line is repeated.

    4th pag: 13 lines of code, except still extensions: c; \windows\system32\spooll\DRIVERS\x64\3\HPZSMLHN. GPD.

    page 5: 3 lines continued page 4.

    page 6: 2 lines continued page 5 more "it's the end of the printer test page" followed by 2 lines of code in symbol.

    I tried everything I could find in OS 7 Pro and repeated the uninstall and reload the procedure.

    In Notepad, it would spring

Maybe you are looking for