HP PRO 200 MFP 276NW WIRELESS DIRECT PRINTING PROBLEM

Similar Questions

• LaserJet Pro M127fn MFP: HP Laserjet MFP127fn print problems

  Hi all would appreciate any help on this problem of pinting. This MFP M127fn uses the HP CF283A cartridge.  Electrical level shows approximately 10% consumption. The problem may be best described by looking at a picture attached, which shows a Word document with two white vertical columns in the Middle - the lines that make up the table should continue in these columns. I removed the cartridge and given him a jerk, but that has not solved the problem. More tips or advice on the resolution of this problem would be welcome. Thank you very much.

  

  Hi Portnoy58,

  Thank you for your answer!

  If the configuration report does the same, then the problem is with the toner of ink, or the printer itself. Please Contact HP phone support for assistance additional., they are able to replace the toner under warranty if it is still valid. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If the replacement toner does not resolve the problem, then the printer will need to be repaired / replaced.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Good luck!

• HP LazerJet 200 Color MFP M276: My HP Pro 200 MFP printer is printing a magenta background

  My HP Pro 200 MFP printer prints magenta background.

  I replaced the ink cartridge and clean the rollers in the printer.  It works very well at the moment.

• HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

  Hello

  I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.

  But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4.  This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable.  Kindly advice. Thanks in advance.

  David

  Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.

• LaserJet Pro 200 MFP M276

  Hello

  I bought a Laserjet Pro 200 MFP M276 for small business a few weeks ago.

  I can't set up scan to email on our established network...
  Our IT guy gave us a number IP, GW, and SM... but I can not drive where these entries and make it work?

  We want unity do scan to email - one of the computers is based in another State, so he needs to go through the network.

  Help?

  Hi @Schnickers ,

  I see you are having problems setting up scan to e-mail for the Laserjet Pro 200 MFP M276. I will definitely do my best to help you.

  I have provided a document to configure the scan to e-mail settings.

  Scan from the control panel (including the Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  If you need help, let me know.

  Good day!
  Thank you.

• the Laserjet Pro 200 MFP can print on 110 lb card stock?

  The all-in-one Color Laserjet Pro 200 can print on card stock 110lb?

  Hello

  The following specifications matrix info shows:

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5097655#! tab = specifications

  Weight, supported

  60 to 163 g/m² (up to 220 g/m² with HP laser glossy photo papers)

  Recommended media weight

  60 to 90 g/m²

  With the help of the following conversion

  http://okpaper.com/calculators/lbs-to-GSM

  110 lb = 162.8 g/m² or 163 g/m²

  This can work, a bit tie, no room for error.

  Kind regards.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• LaserJet pro 200 MFP M276nw display is not in English.

  Can not understand how to change the display to English.  I tried key wrench.  Everything that

  in a foreign language. (Chinese)?

  I go on-line at the library of service you can view the control panel in English. I hope this will guide you through the Panel so that you can reset your language to the language you need.

  Service library

  Printers/Multifunction - Laserjet MFP/AIO - find your printer (M276)

  Scroll down below the screen and get together and set up

  Another window opens with a video - select set language.

  English is the language first in the list.

  If this does not work, here are the lists of the screen:

  System set up (first screen, first choice) - language (top selection on the screen) - English (first choice in the list)

• Have a PHotosmart C4795 wireless capable; printing problems

  I have a Verizon 4 G hotspot for the Internet and was able to print for a while, but now can't do wireless wireless. No problem to do with usb to the printer.

  Print a network Test Wireless in the network menu on the front panel.  That said, is it connected to your hotspot?

• OfficeJet Pro 8600: Wireless direct printing of Photos

  I was able to print documents from my Ipad using direct wireless but I'm not a great success in printing photos on paper photo 4 x 6.  I'd be able to do this?   If this is not any other paper in format 4 x 6?   Another device using this printer is Macbook Pro with a wi - fi connection.

  @Garjoy,

  You need to install the HP ePrint app.

  Getting started with HP ePrint Mobile Apps

  Once you are connected to the network printers, open the eprint application and select the photo or item that you want to print.

  You will then see a preview before printing with advanced options.

  This will allow you to change the paper type and size.

• LaserJet Pro 200 MFP: Print of wire connected & Wifi printing

  Our Laserjet pro is connected to our network.  We can print with it from two desk top PCs. (1 running on XP the other Windows 7)

  I also have a laptop (Windows 8.1) I can print wireless to our other printers a 5514 photosmart HP and 110 HP.  I would also like to be able to print wirelessly with the Laserjet printers, but I can't unless I unplug the wire?

  Is there a setting I need to change to be able to print wireless while maintaining the connection of the wire or is - not possible?

  Thank you

  Catko

  USB, Ethernet or USB and wireless

• Jet Pro 200 M276mw MFP laser: laser jet pro 200 MFP report print fax confirmation

  How can I configure the MFP to print a confirmation report after each outgoing fax (date/time / #pages/recipient/etc)?

  Hello

  The printer click Fax, and then click the Fax Menu.

  Click Fax reports, and then click Fax of Confirmation and replace value "on Fax Send'.

  If you want the confirmation to include a thumbnail of the 1st page you can set as on "include first Page."

  Kind regards

  Shlomi

• New Color LaserJet Pro 200 MFP M276n gives the message "printer is off-line.

  Hi, I have install and use this printer last week, no problem with printing.  Today it tells me that the printer is offline, and documents to sit in the queue without printing.  I am running Windows 7 on the laptop and the printer is connected via a USB cable. It is an office of a person, so I'm the only user of the computer and the printer.  Any suggestions?

  Thanks for your comments.  I ended up ringing the help desk.  I think that print driver software had been corrupted, as it started printing when we tried to re - charge print drivers.  Hope that this kind of thing does not happen too often.  Too much stress!

• HP laserjet pro 200 mfp color: see the picture of the little piece of paper to all prints folded

  If I copy or print, and even though I changed all 4 toner cartridges, I still see the same exact image imposed on all printed documents, in the same place on the page.  It looks exactly like a piece of paper on the 1/4 "wide and 2" long, flattened and folded on itself.  I have a scan of a print that shows, but don't know how to get it in this post.  It does not show in a space on a page, but only when the ink hits to this place.

  It seems that there is a real piece of paper whose image is picked up every time.  It could be on the drum or another party?  How could I solve this problem?

  All of this tells me that the question is the transfer belt.  He saw many times.  You have probably a label or worse a tear in the belt that is done printing.  What happens is when a print job is sent to each toner establishes his portion of the image on the belt which moves from the back to the front and as the image on the belt gets to the rear it is transferred to the book by the transfer roller in the back cover.  Since the belt is the size of a sheet, that the fault only occurs on every other piece of paper.  If it is the material of the label or other foreign material adhered to the belt, the best option is to do a google search for the service manual and download.  Search instructions for the removal of the belt.  It is not an easy task.  If you try and there is material which adheres the belt that you will want to go to an art supply store, and you get a small container of a product call Bestine.  It is a rubber adhesive, remove the solvent.  Be very careful with the belt since traces or damage will be visible on the image.  If the belt is damaged you can buy replacement from many sources.  Good luck.

• LaserJet pro color mfp m177 do not print in color on a machine Windows 8.1

  I can print, but not in color.  Dell XPS 27, Windows 8.1.   Have re-installed and uninstalled the printer.  No change.  I can take the document to a computer of W7 and it prints beautifully in color.  Husband PC, also XPS 27 with W8.1, print in color.   Printer is connected wireless to the network.   The computers are connected to the same network.

  Results are the same when you print the word or directly from a web page using the print icon on the page.  I checked the settings, etc.

  Hi there, please go to start-Control Panel configuration-programs and features, make sure that the previous driver is completely uninstalled before installing the latest driver.