HP Pro 3515: cannot get into BIOS with 3515

Similar Questions

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• HP xw6200 workstation - cannot get to BIOS with F10 Setup screen

  HP xw6200 workstation - cannot get to the configuration screen of the BIOS with the question of the language with F10.  Because of a mental lapse, I turned on the SATA RAID Option ROM.   System fails to start on the C drive. It turns out that the system has an Adaptec 1420SA SATA HostRaid map three discs. I see now three readers at the start after I enable readers to show in the Adaptec utility. Two of the disks are configured in RAID 1 Boot on the C: drive.  He could not see the third disc in Windows Explorer, only the C: drive.

  At startup by pressing F10 I have only three options:

  1 Ethernet Boot Agent

  2 RAID Adaptec Configuration utility

  3 Intel RAID for Serial ATA

  My question is "How to get back in the BIOS to achieve the Advanced tab to disable the RAID SATA ROM Option?"

  This article is similar to your problem.  I would try to clear the CMOS memory.  If you open your PC, you should find a rider to move that will define your CMOS to default values.  When you move the jumper, let up for a minute and then bring it back.  If you can't find the jumper then try to remove the CMOS battery for a minute then replace.

• No boot/cannot get into bios after the withdrawal of the dvd player.

  Hello

  My dvd player is broken and I wanted to exchange it with another. But the computer does not so old is removed. It only shows the boot logo, but it does not continue, and it is not possible to enter the BIOS.

  This happens with and without the new disc. That's why I thought that it is not a compatibility problem.

  Someone has an idea of what I can do?

  My laptop: Toshiba S-1800-514

  Hello

  as you have changed the drive in a new, was the new drive the same as the old or that you have purchased a better?

  When you start Notepad and the Toshiba logo seems to be at - it something to do with the laptop. As (F12) or enter the BIOS boot options (ESC and after this F1)?

  What appears when you changed the old rear drive? The laptop works?

  Keep me posted!

  TOK

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Pavilion P6-2378: Cannot get into the BIOS

  I've recently updated my BIOS to v8.19 on my motherboard of Jasmine using service pack SP67068 after seeing a security warning on my original BIOS on the HP driver update site.  After the update, I am unable to enter the BIOS and more!  I see more startup or other screen.  Here's what I've done so far:

  (1) I entered "bcdedit/set {default} bootmenupolicy legacy" (and standard).  No splash screen.

  (2) I momentarily pressed and also pressed the ESC key during several start ups.  No splash screen.  When I press ESC after turning, the drive just stops.  To continue, I have to press Ctrl-Alt-Del to continue, and it starts Windows normally without a splash screen.

  (3) I went to change the settings of pc and navigated at startup in the UEFI Bios, but after the restart, but the computer crashes just until I press Ctrl-Alt-Del, then it boots normally into windows 8.0, but without the boot (legacy or HP splash) screen.

  (4) I opened the discount to zero the BIOS jumper and removed the battery for 5 minutes, several times.  No splash screen and press ESC or F10 after that reboot causes hang until you press Ctrl-Alt-Delete.

  I wouldn't have updated the BIOS if it is not for the security warning, as it worked very well. Now, I can't get into bios no more.  Help, please.

  Hello!  Yes, your right, it's the graphics driver!  But I had already updated just before I had this problem, so I rolled back the driver and still had the problem.  But then I realized that my TV is connected to the computer when I upgraded and downgraded the graphics driver.  I've updated the driver with the TV disconnected and VOILA, I see the spash screens and am able to get into the BIOS.  The graphic resolution of boot has been masking splash screens.  THANK YOU for your help.  I am very grateful.

• Cannot get into my Inbox from windows messaging, get error code 0 x 80004005

  Cannot get into my Inbox from windows messaging, get error code 0 x 80004005. Can enter messages etc but not inbox? Help.!

  Original title: Windows Mail  

  Check if you have webmail access if your e-mail provider offers this option.

  If it works, check that your antivirus software is not messy things up.  See www.oehelp.com/OETips.aspx#3

  Also, check with your email provider that they have not changed their settings for accounts.

  If it's just the Inbox that has problems, then try to compact and repair the database of WinMail see also www.oehelp.com/WMUtil/)

  Steve

• cannot get into my email inbox. a message appears, your xfinity connect session has expired due to inactivity. Comcast said that it comes to firefox. I have a mac.

  cannot get into my email inbox. a message appears, says your xfinity connect session has expired due to inactivity. Comcast says it's a firefox issue. I have a mac.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

• Lost user account password and cannot get into Netbook

  We bought a Toshiba Netbook nb200 for our teenager for Christmas.

  She was so excited to get it and was on the computer immediately implemented its own user account without writing or allowing me the time to create a floppy disk for it.

  Now the user account won't let us. She said she knew what was the password and when we try, it doesn't work. We spent two days by typing everything under the Sun to see if we can get it and no luck.

  2 days after that Christmas and she cannot get into the computer at all.

  I tried SafeMode etc and does not work.

  Any suggestions on what it takes to please?

  Thank you.

  Try this...

  To retrieve the original factory image using the utilities on your computera? s internal disk storage:

  1. make sure that the computer is turned off.

  2. press in and hold the value 0 (zero) key on your keyboard all turn on/off the computer.

  3. If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, you can select one right now. If this is not the case, go to step 4.

  4. a warning screen opens, indicating that when the recovery is performed all data will be deleted and rewritten.

  Click Yes to continue. Follow the instructions to do a full restore...

  HTH,

  The f

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.

• Cannot get into the bios of the start screen.

  Well I had run into trouble with my video card, and it had to be replaced. Before I do that but I was invited to try a system recovery to get rid of any possible program that was at the origin of defective symptoms of a video card.

  Well, I replaced the video card and everything has been fixed. But... because of the recovery of the system, some of my settings changed in Bios is returned back to default. I remember specifically in the Bios to disable the action keys (Fn + everything related F who did something).

  Problem is now I can't return to the Bios to change the settings once more.

  In order to dispel some of the suggestions more simple I tried already:

  Using another keyboard (allows me to enter the Setup program, reinstall system, diagnostics, etc. very well but not Bios)

  Unplug everything in the back, but the monitor and keyboard

  Erased from the memory CMOS, which led me to a screen saying that my Bios is set by default and to go to the configuration, press F10. But by pressing F10 led me to the single configuration screen and couldn't get into the BIOS.

  I carefully searched the internet to find answers for this problem, but I really hit a dead-end.

  I want to say I know that I've changed before setting on this computer it's just that I don't remember how. I mean I tried F1, F2, Del, Ctrl + Alt, and everything inbetween for shortcut keys enter the BIOS nothing helped.

  Thanks in advance for your reply eagerly to receive a response.

  Oh and I have a HP Pavilion Slimline s5260f, if that helps anything.

  Well fiddle with stuff I have solved my problem. Thing, it's actually, I couldn't have what I wanted through the BIOS screen. I remember he made on my friends computer to get rid of it, where their BIOS had more options.

  As for anyone with my problem (hit accidentally the Fn and the sleep button) I recommend that to go in Control Panel Power Options - then select doing nothing to hit the Sleep button.