HP Pro 6005 with installed K12 education

Similar Questions

• OfficeJet pro died with installed new cartridges

  I just installed a complete set of new cartridges in my officejet pro more than 8600, and less than a week, he died. Troubleshooting with hp support online and the diagnosis is food dead internal; cannot be replaced. Now, I want to know if I can get the printer of the new cartridges that I just installed which cost me over $ 100. I can't have the power to the printer. Any ideas?

  I answered my own question while I expected a response from the community. I have removed the screws at the back of the printer and managed to lift open in the rear, enough to get my hand inside and remove the whole print head and cartridges by lifting the white lever.

  There you go.

• Can I install windows 7 on early 2015 macbook pro version with El captain?

  Can I install windows 7 on early 2015 macbook pro version with El captain?

  Thank you

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Check the tables in the link I provided to see if your computer works for Windows 7.

• I have a HP with installed Win7 Pro workstataion laptop refurbished 32-bit

  I have a workstation with installed HP Win7 Pro laptop refurbished 32-bit hard disk main. I plan to buy a second new HD and install a Win 7 64 bit for having so a dual boot. I had planned out the first HD, plug the new HD and install Win7 64 bit of my DVD for refurbished computer. Plug the first Hd so I can have a dual boot with 32 or 64 bits. I like to know if the procedure is correct or do not know the exact procedure, why I do not know if in the DVD there is also Win7 64 and is also within a DVD where is.
  Thank you for the help
  Valter

  You can do that, because the license is only for use with an architecture, 32 or 64 bits. You can't have both on the same computer. So, either you work with Windows 7 64-bit or reinstall Windows 7 32 bit on the new hard drive.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  - and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  Hey bellmarg,

  Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.

  Let me know how it goes.

  Kind regards

  Nicos

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• No sound in Satellite Pro P200 with XP

  Hi all.

  I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

  I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

  Any idea?

  Thanks in advance.

  Hello

  > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  You're on right way boyfriend, you must also install another patch MS; KB835221
  So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  The problem is that this unit only works in Vista.
  The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
  It's quite new technology designed to support the new features of Vista.
  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  Hope I could help you

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• htc touch pro 2 with pc sync

  cannot sync my htc touch pro 2 with pc

  Hello

  1. what happens when you try to synchronize the phone?

  2. do you get an error message?

  3. have you installed the HTC sync software?

  You can perform the steps on the mobile and check.

  (a) open the "ActiveSync" application on the phone.

  (b) click on "Menu" at the bottom of the screen.

  (c) click on 'connections'.

  (d) CHECK the box "synchronize all PCs using this connection" (when it is cradled).

  (e) in the drop-down list, select USB .

  (f) press OK.

  (g) to reconnect to your computer.

  I suggest you to download the latest version of HTC sync software and check if you are able to synchronize.

  Sprint Touch Pro2 MR | 03.19.2010

  http://www.HTC.com/us/support/HTC-Touch-Pro2-Sprint/software-updates

  You can also post your question to:

  http://answers.Microsoft.com/en-us/WinPhone

  See also:

  Troubleshooting connection synchronization with your computer

  http://www.HTC.com/www/help/HTC-Touch-Pro2/

  I hope this helps.

• Help! Accidentally updated the firmware of the Laserjet pro 400 with firmware Laserjet CP4525

  Help!  Accidentally updated the firmware of the Laserjet pro 400 with Laserjet CP4525 firmware.  The printer is now just spit out pages and never reaches a State ready for the correct firmware.  I really hope that I don't have it bricked just with a click of silly.

  Can someone help or suggest a way to put the appropriate firmware?

  See you soon

  Glyn

  I got it due sort connect the laptop via USB drivers install and then deploy the firmware.

  I then had to delete and add the printer on our print server.

  See you soon

• Is there a way to get the first Pro CS6 with still now I can't find the previous, offered versions with the subscription of the CC 2015?

  Is there a way to get the first Pro CS6 with still now I can't find the previous, offered versions with the subscription of the CC 2015? What is recommended for creating DVDs with interactive menus?

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number
  -a of notes on different versions of cloud and step by step on these differences
  -contains information about the separate library download which is necessary
  -CS6 is the last reminder, see here #8 why http://forums.adobe.com/thread/1337952?tstart=0

  Still and 10 Windows https://forums.adobe.com/thread/2015461 use the compatibility mode of Windows 8
  problem/solution to install Encore CS6 https://forums.adobe.com/thread/1934087

• Will be upgrading to windows 7 or 8.1 10, change anything on Adobe Photoshop and illustrator CS4 and Adobe 11 pro, which are installed on the computer?

  Will be upgrading to windows 7 or 8.1 10, change anything on Adobe Photoshop and illustrator CS4 and Adobe 11 pro, which are installed on the computer?

  I have Win8.1 and will NEVER switch to Win10 because some older programs simply do not work

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• Text templates created in After Effects for editing in Premiere Pro can be installed on an another workstation that has no After Effects installed?

  Hello

  I'm trying to compile and install simple lower third templates to be installed on computers used by producers 50 +. The models that I created and installed on my Macbook (using this workflow How to create templates for Premiere Pro text |) Adobe after effects CC tutorials) work very well, but if I install it on Mac with first Pro ONLY (no installed AE) we see offline. Are these models can be installed & changed text on a workstation without AE? Or AE needs to be installed to operate?

  Thank you

  
  Scott

  After Effects must be installed. It's just like any other item based on dynamic links: After Effects is called behind the scenes to render the results.

• After I installed 2 Plugins Verb I can't find their version of Adobe first Pro CC 2015 - installed after 2015 upgrade

  Hello..

  I allowing to CC 2015 - Premier Pro and once installed 2 plugins of Word, but I can't find any them where in the first Pro program

  They are not under the effects...

  They are in Verberate of Acon Digital and verb SPL...

  Can someone help me to find and start the 2 plugins and then I can allow them with license files I etc.

  Thank you

  Thane Thomas

  [email protected]

  do they show that the available vst plug-ins and are activated?