HP Probook 430 window 8 guard dropped the wireless internet.
HP Probook 430 E5G98PA appears in the driver database yet.
Bought a few weeks ago. I tried: turning off power management control, turn off bluetooth and updated the Broadcom driver via the tab of the device driver. (Do not download HP because does not recognize HP probook 430 or the model E5G98PA). He worked for me this time in Germany where he falls the internet every few minutes while the computer beside it works very well. What should I try next?
Hello
Try to get the driver fron here and also to run a BIOS update
Tags: Notebooks
Similar Questions
-
Unable to share the wireless internet with other wireless devices
Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.Hello
1. don't you make changes on the computer before the show?
2. you receive an error message on the computer?3. what version of operating system you are using on the computer?
4. What wireless device you try to share?Method 1:
You can try the steps in the link and check.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 2:
I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.
2. click on the chevron to expand the current network profile.
3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To learn more about this feature, please visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 3:
If the problem persists then you can disable firewall on the computer and check.
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
You can see the following link to disable the Antivirus installed on your computer software.For more information about how to resolve common network problems, please see the links below:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
In Windows network connection issues
http://support.Microsoft.com/kb/313242 -
Although I have connected my laptop HP G62 to my Samsung LE40C580 TV via a HDMI 1 meter and everything worked OK. The wireless internet then falls after a few minutes. After removing the HDMI cable, internet reconnects. Could you please provide a solution? I have a wireless full power before and after the stall signal.
Hello
What version of the Windows operating system is installed on your computer?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the Internet Connection Troubleshooter and check if that helps.
Follow the steps to run the Internet Connection Troubleshooter:
Click the Start button, type Troubleshooting in the search box, and then click Troubleshooting. Under network and Internet, click connect to the Internet and run the troubleshooter.
Method 2:
Try to update the graphics driver and check if it helps.
Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Hope the information is useful.
-
Windows Vista does not connect wireless Internet
My Windows Vista computer is not wireless internet connection. He does very well with ethernet.
When I ran a full backup, I learned I had two files corrupted netprof.dll. How do I solve this problem?Original title: how to fix windows vista corrupted netprof.dll files
Hi Joreines,
Thanks for posting your query in the Microsoft Community Forums.
I see that you have problems with the connection Wireless on the Windows Vista-based computer.
I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.
Help me with more information.
1. don't you make changes on the computer before this problem?
2. you receive an error message/code?
See the help articles and check if that helps.
Wireless and wired network problems
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
connection Wi - Fi
My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?Hello
1 did you change your computer, after which the issue started?
2. during how long have you had the problem?
3. what web browser do you use?I recommend to update your network card drivers and check if that helps.
http://support.Microsoft.com/kb/283658Let us know the status of the issue and also please answer these questions.
-
I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.
However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
How can I create a network bridge and get the wireless internet to connect please?Any help to fix this would be appreciated,
PThis Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .
If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
Most Microsoft Valuable Professional -
Cannot download Windows 10 guard runs the quick check
My computer with Windows 7 doesn't get past "quick check" screen. Should take 10 seconds, let run for 30 minutes.
Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.
See the instructions: How to download official Windows 10 ISO files
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
-
HP Officejet 4620: Office Windows 10 connects to the wireless network printer but do not print
I have a HP Officejet 4620 all-in-one that I try to use with my desktop computer. The printer has been added to my home network, and I added the printer to my computer via the tab "Devices" Control Panel settings, but when I try to print, nothing happens. The printer icon appears in the bottom right of the task bar that says the printer has "0 documents pending. Strangely, another computer in the office at home, also running Windows 10, can connect and no problem printing to the printer. I tried to install/reinstall the drivers, reset my computer, reconnect with and without a cord USB, and none of this helps. Any ideas on how to solve the problem? My computer was running on Windows 7 until this month when I updated for Windows 10, so I don't know if it's part of the problem or not.
Hi @leopleuridon,
Welcome to the Forums of HP Support!
I see that you are unable to print to your printer HP Officejet 4620. I'd be happy to help you with this. Looks like the driver is damaged.
The software and the driver could have gotten corrupt, so we will need to remove it and reinstall.
First of all. Please follow the steps in this guide:
- HP printers - printer problems after upgrade to Windows 10
- Run Windows updates, keep your computer current with updates for Windows.
If the problem persists, follow these steps to see if you can solve the problem.
Let's start by cleaning up your computer.- Cleaning disc in Windows 10.
- Perform the clean boot in Windows 10 / 8 / 7.
- Use the System File Checker tool to repair the missing or damaged system files. It's always a good idea to back up your data before proceeding.
- File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.
To properly remove the printer and drivers, follow the steps in this Post by my colleague @X-23.
- I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
-
Cannot connect Windows XP computer to the wireless router
Original title: why did I have to disable my ethernet on my front XP computers connections all of a sudden they would connect to my wireless network
I installed a new AT & T wireless router
Only my Windows 7 laptop would connect to the new wireless router.
For my XP desktop and the laptop I had to disable the ethernet connections [although no cable not connected] so that the wireless to connect.
I did it on a whim after days of not being able to connect and many calls to support AT & T.
Both computers have shown the presence of the network, had 4 or 5 bars and had the right key WAP.
So what did this happen? XP update? Wireless driver update? The AT & T router?
I had the problem until I'm the new router, AT & T AT & T could find nothing wrong with the old.
Their "solution" was to send a new router - Netgear v the Westell, I had for days of Bellsouth.
Hello
Have you tried to proceed as stated in my previous post?If you want to continue to launch other steps, you try to temporarily disable the firewall and check. Check out the following link.
How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
http://support.Microsoft.com/kb/283673
Note: on disabling firewalls, viruses, or malware can get into the system. After you complete this step of troubleshooting, turn on the firewall.
Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then, the firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.Post back with the results. -
Windows 7 machines tell unauthenticated when connected wireless to our domain. The unauthenticated message disappears if we connect automatically to wireless connection and restart. Is there a way to authenticate without a connection to the wireless automatically and restart? For example, I would like to connect manually to the wireless, whenever I want and as soon as I do that authenticates.
I use a router configured medialink wireless more as a wireless switch. DHCP comes from our server. Security is WPA-Personal. I also tried to use a different wireless router configuration with a radius with PEAP server and that does not work either. The server radius authenticated the user, but the message on the computer remained the same: "domain.local 2 unauthenticated.
Each way in which users are able to access the resources, but this message is driving me crazy. We do not get this message on all XP machines.
Client side, I tried to turn on the discovery of the network, joined the field, turn off any firewall (only using windows), updated drivers NETWORK card, update the firmware on the router, etc..
Am I missing something?
Thank you!
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
How can I get the wireless signal to stop falling and have to be paid
Hello
What is the model # computer? Check the following link to locate the model #:
http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook
When the question did it first start?
Try the steps listed on the following links to solve the problem of Lan Wireless:
How to troubleshoot a wireless network connection.
If my post answered your question, please mark it as an "accepted Solution".
-
We have a 2000 Hp desktop computer? with windows ME and just recently had wireless internet access. The system is too obsolete to connect even with our router. Now, what version of Windows is necessary for us to spend to be able to connect?
Unfortunately, a Windows ME operating system cannot be upgraded. Its time to recycle that old computer and buy a new one with Windows 7 preinstalled. Here are a few examples.
-
Need help with the wireless internet Power Book G4
Hi-I recently inherited a Power Book G4. I have problems to connect to wireless internet. According to the Profiler systems, it has an AirPort Extreme card, but there is no icon on the screen wireless. Advice to connect would be appreciated!
Thank you-
Stephanie
The icon in the menu bar can be hidden or displayed. The setting is the system network preferences pane. Where it says display, select AirPort. There is a checkbox for the State of AirPort show the menu bar. Since the AirPort icon in the menu bar, you can select the a local wireless network to join.
This pane of system preferences, you can use the more specific configuration settings, although the default settings work often unless you use special parameters with your wireless router.
AirPort Extreme Card maybe for 802.11b and gand not n. If your wireless network is configured for 802.11n only, you will need to change this setting to allow to 802.11 g (on the wireless router).
-
Lose the wireless internet connection when it is not active
Hello
I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.
The only cure to get online is to update the connection.
What I'm doing wrong here?
Thanks in advance... Jens
Hello Jens
Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.
Good bye
-
How can I connect my laptop to the wireless internet?
Ive recently bought a new laptop and im eager to connect to wireless internet but I can't remember the password for my name wireless as my old laptop just used to connect to it and the password has been saved there. So the name appears just and I can't connect to it im wondering if I need to create a new name wireless and if so do I need to remove the one to do this and how?
Follow these instructions...
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=18RAS7QwckB
Maybe you are looking for
-
Satellite L650 - need drivers Win7 WDS
Hello I am trying to capture the image to the WDS server, but it is impossible to load the drivers. Obviously, I need to inject these drivers to PE image (Windows 7 boot image), but I'm not able to find them on the Web from Toshiba site? Any help wou
-
Get an iPhone 6 more unlocked as Possible To Get in The US?
Hi, I live in Jakarta and to go to the United States for the summer break. I was wondering, is it possible to get an unlocked iPhone (specifically an iPhone 6 more) unlocked so that I can bring back to Jakarta or any country so that I can use to call
-
E-mail Microsoft Licensing account number
For some reason when I tried to log into our account with various licenses from Microsoft, it is not recognized by Microsoft more on their Microsoft Volume Licensing site. I double and triple checked the entry. Is there something I can do to advance
-
I am able to send email in Windows Mail but cannot receive e-mail. When I click on receive all messages, it stops just downlod. OS is Vista Home Premium. I just defragged, did it he ruin?
-
Z10 Z10 Blackberry BlackBerry will work on GPRS?
I use Z10. For the first installation & registration Blackberry ID, sufficient WiFi or require a Blackberry internet service? Also for the use of applications like facebook, app world, youtube etc., does gprs connection sufficient?