HP Probook 4320 s Windows XP SSD support?

Similar Questions

• HP Probook 4320 s support SSD?

  My laptop HP Probook 4320 s drive Self Test faild, probably, I buy new HARD drive. Can I use an SSD for my laptop?

  Thank you

  Hello

  Yes, you can use SSDS for your laptops. Many of them around now and in theory, that each of them should work but my suggestion please try Crucial, SanDisk, Samsung. I don't know why I can't use Intel and many trials Kingston.

  Kind regards.

• How to wake up ProBook 450 G1 Windows 7

  How to wake up ProBook 450 G1 Windows 7?

  If the portable sleep I have only one way, push the hold switch off them after.

  Is a way to do wake up more friendly.

  Thank you!

  http://www.sedlenieks.lv

  Hi intssed, sorry to hear you have questions to put your computer out of fashion 'sleep'. I found a great Charter which I think will help you solve the problem. Please click on the link to get the document.  http://support.HP.com/us-en/document/c03383935

  If this does NOT resolve the problem, please do not hesitate to write again for additional instructions.

  Thanks in advance.

• Not found network controller driver, the hp proBook 4530 s, Windows 7

  I use a laptop (4530 proBook s), with Windows 7, 64-bit and in Device Manager I get a yellow exclamation in the network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN driver (s). The packacge driver extracted himself, and there is no confirmation of the installation of finishing.

  The problem started after an update of the BIOS by the wizard of support from hp on my pc

  Hello:

  Here is the link for the driver you need for your wireless card.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  Paul

• my bluetooth does not work on my hp probook 4320 s

  my bluetooth does not work on my hp probook 4320 s, no devices can be detected, files cannot be sent or received, even my mobile phone cannot detect the computer

  Hello

  1. what version of Windows you are running on the computer?

  1. You get the error message?
  2. It was working fine?
  3. You did it all changes prior to this issue?

  I suggest you follow the steps mentioned in the link below.

  Method 01:

   The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 02:

  I suggest you to update software and drivers.

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodClassId=-1&prodTypeId=321957&prodSeriesId=4145545

• HP probook 450 g1 windows 7 drivers

  I need drivers for HP probook g1 450 windows 7 ultimate 64-bit. Where can I download them?

  Hi, Antony:

  I guess you can try the driver directly from Intel.

  I don't understand why the driver from the support page does not work...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

  Best regards

  Paul

• ProBook 4320 s: how to reset the bios password

  Hi guys, I Don t know if this thread is in the right place, if not mods can move.
  
  I need to know how to reset the password of the bios for HP ProBook 4320 s.

  @Spaha

  I couldn't find one in the warehouse so I did not test this.

  Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  http://welcome.HP.com/country/W1/en/contact_us.html

  When you talk to the HP rep ask them to increase your service request.

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD... "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  I would like to know the result, so I can update my list.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  

• HP probook 450 g2: hp probook 450 g2 windows 7 install won't start

  HP probook 450 g2 windows 7 does not start
  I tried to install windows 7 on a hp probook 450 g2 teacher
  A CD (legit) 64-bit
  He necassery hard disk files but does not start
  
  After it's over load the next screen it freezes instantly
  and victory 8.1 is damaged so I can't fix that the laptop came not with a repair disc

  Hello:

  You disable startup secure in the bios and enable legacy in BIOS mode?

  These settings must be changed in order to install and run W7.

• HP probook 4320: problem to upgrade my ram on hpprobook 4320 s

  Hi guys

  I wanted to update my hp probook 4320 s stock 4 GB to and 8 GB of RAM... and has not accepted all 10600 DDR3 ram on the market... what I will do

  Help!

  Hello:

  Please read this related thread.  The notebook of the object has the same chipset as yours...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551#M207994

• Windows does not support external drives

  I have several external hard drives. I have so much that I can't keep up with the software for each drive. someone at - there a solution to this situation?

  Hello
   
  1. what happens when you connect the external hard drive to your computer?
   
  2 did you change on your computer before this problem?
   
  3. readers recognize in disk management and Device Manager?
   
  4. other devices work properly with the Ports of Universal Serial Bus controllers?
  5. what operating system is running on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
   
  Run the fix it and then check.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  You can also check whether external drives are working fine with another computer.

   
  Previous post your answer for you help in this matter.
   

• ProBook 4720 s Windows 7: I have 4 GB of RAM but only 2.99 GB is usable

  Specifications for the ProBook s 4720 said memory maximum support is 8 GB, so of course material and the BIOS can support more than 4 GB.

  I just added 2 GB to the original 2 GB.  The computer properties is reported now only 2.99 GB usable.  I can understand if the chipset and BIOS has a limit of 4 GB.  Why is - what happens on my ProBook?

  I couldn't find anything in the BIOS, set up that could change that.

  Is all the same to recover the missing 1 GB?  Thank you.

  its because your shared video memory use. the embedded video processor uses a certain amount of memory in the computer for video output...

• About what will be Windows XP not supported by Microsoft (not updated)?

  When will be Windows XP not supported by Microsoft (not updated)?

  Computers running under that WinXP SP2 will NOT be offered additional updates of security reviews, automatic updates will stop working, and the Windows Update Web site will not be available after July 10, 2010, until that SP3 is installed.

  Extended support for WinXP SP3 will continue until April 2014.

  CF. http://blogs.technet.com/lifecycle/archive/2009/04/14/extended-support-begins-for-windows-xp-and-continues-until-2014.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Help and support

  I use a new HP Touchsmart laptop, running Windows 8.1.  I installed an old program, Coreldraw 7, but whenever I try to enter data, the Windows Help and Support window opens and prevents data entry.  How can I prevent the opening of this window?

  Thanks for the suggestion to use compatibility mode. CorelDRAW 7 earlier than XP but ran OK on XP. What is the procedure for setting up to work in XP or Windows 7 compatibility mode?

• Need help! This version of Windows does not support this version of Windows Media Technologies.

  I got this error message when I tried to install Hotel Giant 2. Don't really know what to do... Pls help! Contact Microsoft Corporation support This version of Windows does not support this version of Windows Media Technologies. This product, which was created by Microsoft Corporation, has been blocked from running because it can prevent your computer from starting correctly in the future. Recommendation

  Hi Dot77,

  Thanks for posting on the Forum of answers.

  I suggest to download the patch from the site Web of Nobilis.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• windows XP 11 support & format mpeg 4 help please :-)

  I have an evo phone purchased an album want to sync to my computer running windows xp 11 support doesn't seem to sync or even recognize the file

  Windows media encoder 9 Series SDK might help, or movie maker, 1

  must be downloaded from microsoft, to get its public services too. Here is a link

  that gets you going.http://social.msdn.microsoft.com/Search/en-US?query=Windows%20XP%20%26%20Windows%20media%20encoder%20mpeg%20files&beta=0&ac=8