HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

Similar Questions

• ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10

  Hi all

  There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.

  I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.

  A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.

  But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.

  I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.

  Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)

  Volker

  The laptop is to date, according to the release of Windows 10.

  Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.

• HP Deskjet 6122: Problems printing to my HP Deskjet 6122 after upgrade to Windows 10

  Hello

  I used the above printer on Windows 7 OS by downloading the driver for the HP Deskjet 990c printer and it worked well.

  After that I had upgraded to Windows 10, I wasn't able to find the printer printer & devices on the list.

  The icon appears very much (like HP990c), but when I try to print, it is just straight up with an error message.

  The ironic part is that I have a 1220C HPDekjet, who is an older printer, and which has been added successfully as a new printer and prints well.

  Optionally you can give guidance will be highly appreciated.

  Hello

  I'm afraid that the HP Deskjet 6122 is inompatible with Windows 10, it is no longer supported on Windows 8 or any later operating system.

  You can find this information below:

  http://support.HP.com/us-en/document/c04658195

  Kind regards

  Shlomi

• ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

  ProBook 4520 s has problem with webcam after upgrade to Windows 10.

  Skype and other software do not have access to the camera.

  Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

  FIX:

  -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

  -Download and install PC Camera Driver from Realtek Realtek support on site area:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

  NB needs to restart.

  Skype now see camera and works OK.

  Solved.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• HP ProBook 450 i5 - 4200M G1: SD card reader does not work after upgrade to Windows 10

  After upgrading my laptop HP ProBook 450 G1 i5 - 4200M Windows 7 Pro for Windows 10 Pro, Windows Explorer no longer displays the SD card reader.

  Also, if I connect the iPhone 6, it does not appear in Windows Explorer.

  On the other side, key USB perfect work.

  Please help me.

  Kind regards

  Guido

  Hi, Guido:

  The only suggestion I can offer on the card reader would be to try the driver W10 support page for your laptop if you have not already done so.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405424&swItemId=ob_150855_1&swEnvOid=4192

  As to why your phone is not appear, unfortunately I don't have any suggestions for this problem.

• ProBook 450 G1: Question of Probook of video playback in G1 of the 450 after upgrade to Windows 10

  Hello.

  Issues (stop, shaking in the video and sound) are multiply video playback after upgrade Windows 8.1 for Windows 10.

  Questions for:

  -Playback (avi, mkv, mp4 etc.) VMP Movies & TV AND;

  -Playback of video from Youtube by Edge and IE11;

  -Video playback in games.

  NO problem all does to (workaround):

  -Reading of files (avi, mkv, mp4 etc) by VLC player.

  -Video playback from Youtube through Firefox.

  Not any way to workaround that emit in the games: its integrated use of resources of the browser.

  VLC uses own video codecs, so I think that this emission source is possibly in embedded Windows 10 codecs?

  Drivers:

  Intel SoftPaq Download Manager Video drivers (latest for Windows 10: technical support site the same as at HP).

  AMD drivers for Widnows 10 SoftPaq Download Manager (the same that at HP supports the site) is buggy and causes crash (the "internal power error"). If Catalyst drivers from AMD (latest from Windows 10) site.

  Additional drivers, also upgraded for Windows 10 (via the SDM for Windows-10): chipset keeps drivers, WiFi, 3D etc.

  Any ideas?

  Problem has been resolved by unistalling HD Audio drivers (installed on Windows 8.1 early HP).

  After the reboot, the drivers HD Audio was automatically installed and then updated via Windows Update.

  Video playback is now correct through no fault inside any software (IE, edge, WMP etc.).

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• Satellite L40t-b917 - sleep problem after upgrade to Windows 10

  Name: satellite product L40t-b917

  Operating system: Windows 10 (64-bit)

  Hello

  If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.

  After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.

  Any solution to this problem?

  Where can I download updates for my device?

  Thank you.

  Hello

  Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.

  Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.

  Make sure that the BIOS is also the latest version.

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• GeForce 9800GT problems (resolution and horizontal lines) after upgrading to Windows 7

  I have recently upgraded to Windows 7 on my desktop HP m9350f computer.  I more a few days later my screen has finished by resolution 800 x 600 with horizontal lines on the screen, from the start.  I spent several hours with the support of Microsoft and HP by train to reload the updated drivers from the Internet HP site and Web of NVIDIA site with no improvement.  As part of the normal troubleshooting I plugged a cable and another monitor and the problem is neither the monitor nor the cable.  I removed the video card and temporarily replaced by another video card and the problem goes away, so the problem is with the graphics card (as opposed to the motherboard).  I replaced the NVIDIA card and the problem is back, essentially confirming that the problem is directly related to the graphics card.  While I found 'a lot' of discussions on the internet about similar issues with 9800GT cards, I can't find a solution to this problem. HP and MS have exhausted their resources. Any ideas or solutions?

  It's time for a new video card.   Remember to match the energy needs of the new card with the power supply of your PC.