[HP Probook 450] The upgrade of windows 8 to 8.1

Similar Questions

• FN keys do not work after the upgrade to Windows 10

  Why the FN keyboard does not work after upgrade to Windows 10?

  FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

  You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Satellite U500 - 11G - cannot activate the upgrade to Windows 7

  Really sorry to this topic, but with the new Satellite U500 - 11G can not activate the upgrade to Windows 7. Keep told by entering the serial number that it was origonally installed with Vista, but no info on how to activate it.

  Any help here please?

  Hi mate

  The Toshiba pre-installed Vista OS has already been activated.

  AFAIK if you upgraded the operating system Vista to Win 7 using the Toshiba Windows 7 upgrade kit then a Win 7 must be already activated and does not need to be enabled separately

  See you soon

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Problem with a keyboard key of T440 after the upgrade to Windows 10

  Hello world

  I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:

  

  As long as the "CTRL on the right" (commom on other layouts).

  Everyone was faced with a similar problem or have any clues as to what might solve this problem?

  Thanks in advance,

  Felipe

  Solved.

  Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.

  If you are facing the same problem, use this registry tweak and the problem is solved:

  http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip

  (the file name indicates "win7" but it also works for Windows 10)

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

• Photosmart 7762: Photosmart 7762 small print page in A4 since the upgrade to Windows 10

  I have just updated to Windows 7 to 10.  When I go to print an A4 document now doing at a reduced size that I have an additional border of space to the left and down.  The page is set to A4 of the printer is set for A4 and I tried printing and printing actual size to fit, but it makes no difference.   I deleted and reinstalled the printer so that it would probably use the most recent driver, but even when it makes no difference.

  HELP PLEASE

  (PS. My old LaserJet 1200 always print the same document A4 correctly after the upgrade to Windows 10)

  Problem solved.

  First tried to download HP printer Installation Wizard, which is installed as a brother of generic but with HP Photosmart 7760 showing when you click above but it just printed pages of random characters.

  Then the printer found possedantes-advanced-new pilot and started to windows update and it evetually listed series printers so I clicked it and now it prints A4 OK again.

• HP Stream 13: Beware of the upgrade to Windows 10

  I have just told me that in Hp Support the HP 13 Stream is not recommended for the upgrade to Windows 10 due to the lack of space and memory for this new operating system.

  I thought it would be interesting as well as alarming to soemwhat.

  This occurred after I contacted them for help and a solution to a failed update of the ' Intel dynamic and thermal Framework Client Driver SP 72416.  As a result, I did a sfc and dism scan to check the status of the file system and the final result are reports of corrupted files and source files could not be found.

  I should add that at the moment windows 10 works very well on my stream and a recent update of Windows loaded and installed ok. I currently 11.5 GB of free space on the C drive.

  HP support recommend reinstalling windows 8.1 provided to ensure a workbook entirely for the present and the future, because they anticipate the future updates and developments with Windows 10 is likely to produce more problems with the stream.

  Now this threw me after all the recommendations pushes and apparent and challenges for the upgrade of this small notebook with 10 Windows. I'll hold fire for now with other changes, while I go over what to do next.

  Someone at - it something to add?

  L

  Delete all partitions is mentioned in the link that I sent, all partitions are displayed and you can highlight each and remove them:

  -Select: ' Custom: install Windows only (Advanced)»
  -Delete all partitions.

• Pavilion dv7-6b20ex: since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  hi..

  Since the upgrade to windows 10 I get the update message error 0 x 80240017 Windows Defender

  I hope to have useful response... Thank you

  This letter specifically;

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  Updated definition for Windows Defender - error (definition 1.203.2341.0) KB2267602 - 0 x 80240017

  https://support.Microsoft.com/en-us/KB/918355

• Pavilion g6 2213 its drivers needed for Windows 7 when you run the upgrade to Windows 8.1 failed (lots!)

  Hello

  After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.

  To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!

  In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.

  A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1

  See you soon

  Hello:

  Your model is pretty easy to install W7 x 64 on.

  If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.

  I don't think the drivers wireless since the page g7z-2100 driver will work.

  Here are links to most of the drivers you need:

  First of all, download and install the AMD chipset driver and restart.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

• HP Officejet Pro 8600 Premium: Tray Lock worked until the upgrade of Windows 10

  Since a year now, I have 1 locked drawer for our book of receipt only, easier than all the other printing set to automatically select the default tray to tray 2 (Tray 1 is locked and all)! But I tried the upgrade of Windows 10, that was an epic fail and my cpomputer was sent to the doctor for the day. When I came back I had to basically start over with a new computer. I have everything back to be better than before, but THIS problem! Receipts in Tray 1 and my payment software its configured for Tray 1 specifically for receipts. All other default things that select and always tray 2. I can't anything out of tray 1. HOWEVER, my boss's computer is on a network with it and when it prints a receipt from his computer he properly dispences Tray 1. Yet.

  Help! PLEASE, I BEG YOU!

  Lacey!

  Hi @L2thaJ,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print correctly on tray 1 on your HP Officejet Pro 8600 Premium e-all-in-one printer. I will definitely do my best to help you.

  Is the other computer Windows 10 institutions, who works for printing on tray 1?

  It looks like Windows 10 and the software you are using does not work with the printer driver, what might happen.

  You are able to print to Tray 1, when printing from MS Word or Notepad?

  Please ensure that you use the latest printer driver for your printer.

  Download and run The printer Installation Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• OfficeJet HO 5742: I have HP Officejet 5742 and since the upgrade to Windows 10 I can't scan.

  Since the upgrade to Windows 10 I can't scan. The printer indicates this computer not connected, but I can always copy and print.

  Thank you rb011. I used the print and scan doctor and he pointed me in the right direction. The solution is to uninstall the printer and reinstall the drivers updated from the HP website. Everything is ok now. Thanks again.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.