HP probook 4510 s protect tools

HP protect tool 4

Hello

You can find it on the following link.

http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3934830 & swItemId = ob_83870_2 & swEnvOid = 1093 #TAB4

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • HP Probook s 4430: protect tools

    HP support, I have recently updated HP Probook 4430 s Win8.1 / 64-bit.   I could not find driver HP protect tool and access key in the list of drivers.   Where can I find them if...

    You are the very welcome.

    Sorry, that didn't work.

    The only other suggestion I can offer would be to try the W7 support page of your notebook hotkey driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_110821_1

    If you do not see one set of drivers for the operating system that you have installed on your PC support page, this means that HP does not support this operating system - which means that some of the features of will not work or work properly on this operating system.

  • 4730 proBook s: HP protect tools

    How to uninstall HP ProtectTools security Manager for the upgrade of Win10 of Win7?

    protection tools version is 6.08.1017

    Follow the steps in this thread:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/removal-Uninstall-HP-ProtectTools-Security-Manager/TD-p/4561374

  • Driver protection tool HP Probook 4431 s figure is not for Win8.1

    HP support,

    I've recently updated HP Probook 4431 s Win8.1 Prof. 64-bit.

    I could not find driver for HP protect tool and recognition of face under list of drivers.

    Where can I find if drivers already available.

    Siragusa

    Hello:

    See if the software tools for the protection of the 4440 s works for you...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229487&swItemId=ob_124362_1&swEnvOid=4158

    There is no W8.1 facial recognition software for ProtectTools.

    Try the software supported in W8...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_117452_1

  • Password entered with the fingerprints - HP protect tool/Password Manager

    Hi all!

    I use HP protect tools and Password Manager and password authentication Windows and fingerprint authentication. I have problems with fingerprint authentication.

    When I try to enter the password automatically with the activation of the footprint of the password is not entered. The password is entered if I click on the Password Manager icon select fill in the data of logon and authentication with my Windows password. It never came with my fingerprint authentication (even if I get a green check mark on the icon so nect I drag my fingerprints).

    I am administrator on my PC and have registered three fingers, I am trying to use for authentication. I'm really confused why Windows authentication, it works well, but the fingerprints does not have the password. I find no more errors that suggest the registration of fingerprints does not work.

    I already used the password on another HP Manager but I never had this problem. The password has been entered always automatically when I spent my finger.

    I use an EliteBook 8460p with Windows 7.

    Looking forward to your help!

    Kind regards

    Pheoebe

    This solved my problem!

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/can-t-make-the-fingerprint-scanner-log-me-in-8540w-EliteBook/TD-p/5576613

  • ProBook 4510 s: DVDRAM Drive detects is not audio CD

    Drive DVDRAM GT20L in my Probook 4510 s does not detect audio CD or CD of the software, but it does not seem to run OK for DVD video.

    I tried the Microsoft Fixit tool, which says there is a problem, but he can fix it.

    II have checked the registry for upper & lower filters, but there is no entry filter in HKEY_LOCAL_MACHINE\SYSTEM\CurrenControlSet\Control\Class\ (4D36E965-E325-11CE-BFC1-08002BE10318.

    I tried to create a registry subkey.

    All of the above is as stated in the support.microsoft.com/kb/314060/en-us.

    I uninstalled the driver, removed the drive, rehabilitated the road and allowed the automatic detection and installation of the drive, to anything will do.

    I have tried of course, update driver, but every time the system says that the best driver is already installed.

    Do you have suggestions for other possible patches that I can try?

    Thank you

    It's a hardware problem. The player has several lasers for multiple functions and it is quite possible for the function of CD to stop working and the DVD function fine. The only solution is a replacement player. This is a sale on eBay:

    http://www.eBay.com/ITM/HP-ProBook-4510s-4515s-4520s-4525s-4530s-DVD-burner-writer-CD-R-ROM-player-drive-/151116553242?PT=LH_DefaultDomain_0&hash=item232f3f9c1a

    This video shows how to get inside and do the replacement. As says the announcement you have to switch the facades of the old drive. If you need more help post back.

    https://www.YouTube.com/watch?v=CJ5ZPHiyvEA

    It's a lot more you need to do. After removing the keyboard, you can remove a screw in the DVD drive, and then drag it on.

    Repair manuals

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • How to disable the trackpad on ProBook 4510 s

    I have been setting up of a Probook 4510 of s for my disabled son. I have Windows 7 installed successfully and and everything works fine. Unfortunately, due to her problems with fine motor skills, he is unable to use the trackpad effectively and prefers his bluetooth mouse. When you use the mouse he finds often hit the trackpad and move the pointer, just as it is clicking. To the help of a laptop is better slow for him so it would be great if there is a hotkey to toggle the power switch trackpad because exists on many laptops. His old Compaq laptop has a button at the top of the trackpad, but it does not work. The option that turns off in the properties of the device are not (greyed out) and I'm afraid that uninstalling drivers could be disastrous if the mouse fails for some reason any.

    He finished his last year in high school including 2 submit them so the laptop is an essential tool.

    Recommendations on how to deal with this problem?

    Thanks Mets, but who was also grey until the...

    I don't know what happened, but after you have reinstalled the lateset Synaptics drivers again, I suddenly able to disable in their software (it was is no longer grayed out). That never conflict or corruption took place he was cured by uninstalling and reinstalling several times.

  • HP Probook 4510 s: no bluetooth device was detected

    Hello. I have not used bluetooth in a few years. Now when I tried to pair device with my phone I just realized that I have not instaled bluettoth. Tried to install a driver, but that is the message that appears on "no bluetooth device was detected. Please make sure that your bluetooth device is connected correctly in order to continue the instalation.

    I have windows 7, 32-bit operating system. And I use HP Probook 4510 s. thanks

    Have you installed the HP bluetooth driver?

    It would be the only suggestion I can offer.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_81348_2

  • How to remove HP protect tools to anti-theft

    I'm moving from Win7 to win 10 on my 8560w.

    The preparation of Windows 10 utility says that I must remove HP Protectools.

    But remove HP Protectools fails because first I remove "HP theft recovery software".

    I know what actially LowJackPro (\Program Files x86\Hewlett Packard HP recovery).

    But I can't understand how to remove it: there is no uninstall program in the folder of "Recovery" and
    the "recovery" program does not appear in the list of control panel of programs that can be deleted.

    Thank you for any pointer!

    I reinstalled the patch Anti Theft (computer record) and was abot to remove protection tools properly. Do not know why the 1st time I took it out, there were still some "stuff" left behind.

  • recovery to protect tools

    I use the tools of protection on Windows XP with encrypted drive.

    XP was suspended so I ran the check disk etc. - still suspended

    So I edited services / system / boot.ini

    I spent off too of and windows says "the system cannot log you»

    How to reset access

    I can't use Safe Mode because I think that its switched off the coast in protection tools

    What to do / how to boot from USB to change C: unencrytpted

    Hello

    The reader at this point is basically a paper weight. With that you disabled, if you can not start in it at all, you won't be able to unlock. As you might be able to format it. Anyway, all that is on the disk is lost.

    You can try giving support a call to see if they have suggestions for you if you wish.

    Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.

    Thanks for posting on the HP Forums.

  • EliteBook 8460p nootbook: uninstall hp protect access to the tool Device Manager to remove HP protect Tools Security Manager

    I'm trying to update my Windows 10 computer and it says I need to remove "HP protect tools security Manager. I had to first remove the other programs, but now I can not remove the last "HP protect tools Device Access Manager" program a window pops up saying: you must be an administrator which I am on my computer. help please

    Tell him that you get another account with administration full wrights

    https://www.YouTube.com/watch?v=3NiTNj1pm2o

    made easy and you can uninstall everything, you need to activate this account when you are finished

  • Laptop HP ProBook 4510 s

    I tried to turn on my HP ProBook 4510 s laptop PC and it will not turn on. He works the day before, but nothing now. I plugged in the power cord, and the emblem of HP in the power button blinks. It will still not power on. Any suggestions would be greatly appreciated. Thank you in advance.

    I answered my own question.  I took out the battery and plug in the power cord. He shot straight up. I stopped and replaced the battery and excluded the supply cord. He shot right up again. Don't know what this does, but it worked.

  • "WINDOWS 10 -" HP Protect Tools Manager.

    I want to upgrade to windows 10 but HP protection tools is the only question on the upgrade, he said I would need to remove it during the installation. How to do this? I'd be ale to get this app again and how?

    Anyone else having this problem?

    Concerning

    Hello @ARCHICLAY,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I came across your post on the HP protect Tools Manager and wanted to help!

    For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

    How can I find my model number or product number?

    From my understanding, that the software is used similar to security software.  So, for this purpose, if the software is running, the laptop is not able to upgrade to Windows 10.  You can try to reinstall the software later.  If you are not satisfied with the upgrade of Windows 10, you can use back to a previous generation option, in your control panel:

    HP Notebook PC - upgrade to Windows 10

    This operation takes back you to your original operating system.  Remember that this option is available only for 28 days after the installation of Windows 10.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP ProBook 4510 s power problem

    I have a ProBook 4510 of s. This morning he was in battery operation. Battery charge with the AC adapter is plugged in. Only a battery with flashing red x icon. Once the battery is depleted it would boot is no longer. I took out the battery and held the power for 30 seconds and plugged only adapter button in. The computer still does not start. Any suggestion would be appreciated. Thank you!

    Note: When the adapter connects to the laptop there is a little light above him. With the battery connected that little light flashes orange 7 times after pressing the power button. With the battery no light at all. NA not knowing if this information was relevant. I just wanted to add.

    Sounds like the battery has just stopped charging and the laptop powered by the adapter or because the charging circuit on the motherboard or the power adapter is bad. The first thing is to test the adapter using a multimeter or try another known good. Post back if you need help with this.

  • ProBook 4510 s: probook 4510 s windows upgrade

    My mother has a ProBook 4510 s, which was bought right before Windows 7 came out (all about 2009, I think) so its mobile currently works on Windows XP (32-bit processor). She does not use the computer for much - mainly domestic use for Gmail, saving photos, printing, web browsing, etc - and hopes to upgrade Windows rather than buying a new computer. He arrived at the point where she cannot even download pictures on his iPhone to computer and iTunes can be loaded on computers Windows 7 or higher.

    Because she has a ton of free space, and it seems that its operating system would allow an update to Windows 7, I want to know if it is better to just move him to 7 or upgrade to Windows 10.

    Hoping someone can help me to determine if it's worth the trouble to do the complete upgrade of Windows 10 - his cell phone will be able to manage the upgrade - or to just upgrade to Windows 7, and see how that works before making the switch to Windows 10 eventually.

    Thanks in advance for any help!

    Hello:

    Since there is no support W8.1, W8 and W10 driver for this model, I suggest you go on W7 and then try the W10, so that if W10 does not work, you can go back at least to W7, rather than to be up the Creek without a paddle if W10 does not work on the PC.

    You should be able to use the W7 drivers for devices W10 not drivers for, but since I've not tested W10 on 4510 s, I can't tell you if it will work or not.

    I tested it on the 6910p and the nc6400 and it works OK.  The only thing I didn't try was the fingerprint sensor (driver has been installed), and there is no driver for the infrared port, so I disabled the device in the BIOS, because I do not use that either.

Maybe you are looking for