HP probook 4520 s - faillin attribute: 1 error

Original title: hp probook 4520 s

Please I have problem with my laptop, I have error faillin attribute: 1 for my smart drive from 1720, pleas help me

Hello

1 have had any changes made on the computer before the show?

2. when exactly you get the error message?

3. What is the full and exact error message?

I suggest you to refer to the links and check if it helps:

HP System Diagnostics UEFI

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?prodTypeId=321957&prodSeriesId=4145198&swItem=ob-85849-1&prodNameId=4145326&swEnvOID=2103&swLang=13&taskId=135&mode=4&idx=3

Solve a problem

http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=321957&prodSeriesId=4145198

If the problem is not resolved, please provide more information to help you best.

Tags: Windows

Similar Questions

  • HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

    Hello

    I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

    I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

    When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

    The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

    LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

    I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

    Any ideas?

    P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

    Hello skinandbones13

    Thanks for posting on the HP Forums!

    I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

    Have a wonderful day!

    Mario

  • ProBook 4520 s: updates to driver for all components

    Salvation; I read the posts on the update of the drivers on the ProBook 4520 s and I do not understand that we should select the most recent drivers from the drop-down list under EACH item listed.  I'm still a bit confused, however.  Some components have several drivers listed under them, some of which have different names/Descriptions.  I need to know WHICH of these "components named" is installed on my ProBook?  Alternatively, they are ALL different names in EACH of the installed components?  I'm afraid to install the wrong drivers if I select just the most recent review date, irrespective of the name/description.  I have had my ProBook 4520 s about 5 years and NEVER updated ALL drivers (that I can remember).  I am running Windows 7 Professional, 64-bit with the Intel Core i5 460 M/2.53 GHz Quad Core processor, a 320 GB Serial ATA-300, 7200 RPM hard drive and a HD Graphics Dynamic video memory technology Intel graphics controller, etc., etc.  The problems I encounter are: it is slow to start, it delayed opening opening sites & programs & there is a power outage occasional temporary graphics (gel?).  So, at the very least, I think that my graphic card driver needs to be updated.  But surely most other pilots must update as well.  (And Internet HP site lists a ton of drivers when I plug my ProBook.  I use my laptop every day and have not had a major problem.  I recently had to update the drivers on my HP printer, and even if the printer is NOW printing again, I ALWAYS shows an error on the ProBook (when I go in devices & printer from the control panel), on the Officejet Pro 8600 Plus e-all-in-one. As the error message did not disappear after I solved the printing problem, I think it's probably a good idea to update ALL the drivers in my ProBook before I start to experience more problems... Is someone can you PLEASE help me understand WHAT drivers should I install and in WHAT order, so I do not screw up my ProBook?  Thank you very much!  I appreciate all help.

    Go to the Device Manager in Control Panel, check the names of the devices under each category. Download the latest version of the one you want from the HP support page depending on the installed operating system

  • HP Probook 4520 s running extremely slow

    Hello

    recently my laptop have been slow (almost at a standstill). I suspected at first, it was a virus, but a test of the virus found nothing. So, I formatted my OS partition and installed Windows 7 Professional and that the essential software that I use. After a short time (1 day), he started running slow. among other things, I freed disk space, but it did not help.

    Then I ran the BIOS boot and test drive, and both returned "error: read failureError: failed to read.
    Help, please.

    Record everything you keep on an external hard drive. You have discovered why she was slowing down. Your hard drive has failed and needs to be replaced.

    The BIOS hard drive Diagnostics is an excellent utility for troubleshooting.

    If your Probook 4520 is still under warranty, contact HP for a replacement hard drive.

    If is no longer in warranty, it's time to buy a replacement hard drive. Once you have installed the new break of hard disk on the set of recovery disks or USB recovery media that you have made.

    Your Probook 4520 s uses a SATA hard drive 9.5 mm, 6.35 cm (2, 50-in). I do not recommend using a SATA3 drive for possible compatibility issues.

    A SATA or SATA2 SSD also works and will be a performance gain true if you choose to go this route.

    A link to the guide to maintenance and Service is here.

  • Recovery partition engage F11 starts after stock Win7 installed - Probook 4520 s

    Laptop: HP Probook 4520 s (with the Energy Star label)

    OS: Windows 7 32-bit

    Error: Nothing happens when you press F11 at startup

    Deliver changes: installed Windows 7 from stock disc Windows 7

    I am a PC technician with quite a few years behind me, but that gave me even after a day of research solutions to stop online.

    A friend bought a ProBook 4520 s where the previous owner, just before selling it, installed Windows 7 on a disc of Windows 7 Microsoft stock (I suppose that pros sell with a 'clean' OS), who of course ERA naked place without drivers, etc..

    When the installation has been made however, it didn't destroy the partitioning of HP (that is to say, the scores remained: SYSTEM OS (c:\), HP_RECOVERY, HP_TOOLS). These scores seem intact, so I am trying to run a HP recovery to return the computer to factory settings.
    When the computer reboots, I am asked to press 'ESC' to the options, what I do, then it prompts 'F11' for HP Recovery. When I press F11, it starts only the Windows 7 operating system as usual. With what I've managed to collect via search, I think something was disturbed on the HP_RECOVERY as the MBR partition, or something, possibly by the previous user making the active HP_RECOVERY partition, then selecting "Repair Windows" on the Windows disk.

    I tried solutions include:

    • Pressing ESC-> F11 at startup [simply boots as usual].
    • The definition of the partition HP_RECOVERY 'active' disk management, and then restart [simply boots as usual].
    • Installation "Enhanced HP Backup and Recovery Manager for Microsoft Vista" (sp38131.exe) [when it is run, and the recovery of the PC is selected, it is said there is no partition recovery and demand for drives].
    • Installation "Fix for HP Multi-Partition Recovery Manager" (sp48415.exe) suggested to the 'green post' here [no change].
    • Installation 'Recovery Manager install for Microsoft Windows 7 Upgrade Patch' (sp45823.exe) [no change].
    • Install "HP Recovery Manager for Microsoft Windows 7" (sp45602.exe) [no change].

    I live far from having access to the purchase of HP recovery DVDs, so need a solution for this problem, please. At most, I can download.

    The operating system in recovery, I expect Windows 7, because there is a Windows 7 sticker on the laptop.

    There is not any way I know how.

    In addition, the recovery disk is a plain OEM version without drivers or software.

    The DVD driver and application automatically installs the software and drivers that are on the recovery partition, but it is on the support page and driver of the laptop (with the exception of the DVD software, which isn't a big deal since you can play DVDs in W7 w/o any 3rd party software).

    Just download and burn the ISO using a ISO burn option and reinstall W7.

    If you can't find the drivers, please read this guide to find the hardware ID and after the first string for each of them, and I'll give you links to the drivers you need.

    http://laptop-driver.blogspot.com/2009/12/how-to-check-hardware-ID.html

    I always delete all the partitions and reinstall a clean OS on any PC, I am owner and download all the drivers and the software I need, anyway.

    I see no major reason for dismay.

    A recovery partition is handy to have, but once you build the PC the way you want, use the included backup and imaging tools native to all versions of W7 and create your own recovery image on a drive hard portable usb.  Can use it if you need to recover the operating system.

  • BSOD BCCode 116 - generated after installing updated drivers for ATI Mobility Radeon HD display drivers for HP Probook 4520 s 5470

    I continue to work through issues with my HP Probook 4520 that is now almost 4 years with the same problem of a frozen screen.

    Today, I decided to work in seeing if there was new ATI Mobility Radeon HD 5470 available display drivers.

    I have the version of 15/03/2011 of the ATI Mobility Radeon HD 5470.  With that came the AMD Catalyst install Manager Version 3.00.0868

    .

    During his visit the HP site I saw that they had a newer version available on the graphics card available with the date of April 30, 2011 and the download file has been identified as sp52818.exe for the Version of the graphics driver to download 8.743.2-- 110315 5A - 115833C.

    In light of the penalty, that I got with my graphic display driver 15/03/2011, I decided to uninstall the drivers of my 15/03/2011 and download the drivers of 30/05/2011.

    Doing this has my computer I notified that I already have the sp52818.exe file and so I was a little confused, but I allowed him to install over my existing file.

    To install the file sp52818.exe successfully, I went to work.  Then after some time (within an hour), I got a message generated by computer at the bottom right of my screen saying a newer version of my graphics card was available at www.amd.com .

    (first thought was - why HP had it?)

    In any case... I decided to click on the suggestion box, visit www.amd.com and see what they had.  I was directed to install a driver to automatically detect the utility, and during the installation, the utility's suggestion came back that my computer can access a new graphic display driver.  I thought it was nice and so I then proceeded to of course download the .exe file for my HP probook 4520 s.  The proposed file was qualified: 13-12_mobility_win7_win8_64_dcl_ccc_whql_exe (graphic display for the ATI Radeon HD 5470 by suggestion of AMD driver.)

    Everything goes well.  It starts to download the Catalyst install Manager Version 08.00.0915, then the ATI display drivers with > .NET Framework 4.5 (I'm just observing things that are facts).  Several times the black screen comes on, but that is to be expected.  I wait patiently, and finally I see the green bar of progress.  Just as the green bars come in the end, the screen goes black again for about 1 to 2 minutes.  Then suddenly the dreaded BSOD Blue Screen of Death comes with an error message saying that something has gone wrong and closing of windows, and he mentions something about Windows display drivers.  I'm not panicking yet, but is offered the possibility of recovering and I let the computer pick up normally, and I return to the screen of welcome with happiness and connect to.

    From the entrance, the first thing I see is a Windows Error Message, I opened and saved and here provide for our education and research.

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8008E1D010
    BCP2: FFFFF88004EFFD88
    BCP3: 0000000000000000
    BCP4: 0000000000000002
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\021414-72946-01.dmp
    C:\Users\Owner\AppData\Local\Temp\WER-179057-0.SysData.XML

    Read our privacy statement online:
      http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\System32\en-US\erofflps.txt

    * * * * *

    I'm not able to open the .dmp file to display as the file associations cannot establish a connection, and I am unable to find the AppData file under users.  Windows 7, it is extremely difficult find the files suggested by error messages.

    I would like to know why the BSOD appeared, then please explain the error message that came as I was trying to install a driver recommended for my computer using download driver acceptable practices, causing me concern and frustration, as well as the 4 years of intermittent to faithfully display failure.  I'm not sending the machine backwards.  There must be a solution.

    (Rabbit Trail - the suggestion to display the privacy statement is also an attempt to distract people to get a real fix and do believe that Windows 'help' you who isn't.)

    The laptop is running and I can see things on the screen.  It seems OK, but I'm going to face other issues?

    Thinkgal.

    VIDEO_TDR_FAILURE (116)
    Try to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: fffffa8008e1d010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
    Arg2: fffff88004effd88, the pointer in the responsible device driver module (owner tag).
    Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
    Arg4: 0000000000000002, optional internal context dependent data.

    STACK_COMMAND: .bugcheck; Ko

    FOLLOWUP_IP:
    atikmpag + bd88
    fffff880'04effd88 4883ec28 sub rsp, 28 h

    SYMBOL_NAME: atikmpag + bd88

    KD > lmvm atikmpag
    start end module name
    fffff880 '04ef4000 fffff880' 04f94000 atikmpag T (no symbol)
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp: Fri Dec 06 15:21:45 2013 (52A231D9)
    CheckSum: 0009FEFF
    ImageSize: 000 A 0000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

    Bug Check 0 x 116: VIDEO_TDR_ERROR

    http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263 (v = vs. 85) .aspx

    You are right that the accident may have been caused by the newly installed ATI driver. I checked on the HP Site and there is a version of the same display offered with the same output driver date on the ATI site, so the difference may be that the version of HP's specific system, while the ATI Version is just generic, so my suggestion would be to uninstall the ATI Version and replace it with the HP driver.

    Laptop HP ProBook 4520 s

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Driver ATI video and control panel (VERSION from HP)
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93664_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    *********************************************************************************************************

    Drivers who have to update or delete.

    ArcSoftVCapture ArcSoftVCapture.sys Thu Dec 03 13:32:41 2009 (4B 180449)
    Driver Description: Magic - i Driver ArcSoft

    Driver update Site: Inc.
    --------------------------------------------------------------------------------------
    Impcd Impcd.sys Fri Feb 26 18:32:11 2010 (4B8859FB)

    Description of the driver: Intel® Turbo Boost technology driver

    Driver update Site: http://downloadcenter.intel.com/
    --------------------------------------------------------------------------------------
    PxHlpa64 PxHlpa64.sys Fri May 15 17:43:06 2009 (4A0DE1EA)

    Driver Description: Driver of Sonic CD/DVD (used by many different programs of CD/DVD)

    Driver update site: http://www.carrona.org/pxhelp20.html lists some of the programs it is used in.
    --------------------------------------------------------------------------------------
    RsvLock RsvLock.SYS Fri Oct 02 05:18:24 2009 (4AC5C560)
    Driver Description: McAfee SafeBoot Endpoint Protection driver

    Driver update site: http://www.mcafee.com/us/products/endpoint-protection/index.aspx
    --------------------------------------------------------------------------------------
    These drivers appear to be the remnants of a previous installation of a McAfee product. Please run the cleaning of Macafee utility to completely remove the remnants of MacAfee.

    http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

    SafeBoot SafeBoot.sys Fri Oct 02 05:18:05 2009 (4AC5C54D
    Driver Description: McAfee SafeBoot Endpoint Protection driver

    SbAlg SbAlg.sys Wed Nov 26 06:00:08 2008 (492D2C38)

    SbFsLock SbFsLock.sys Fri Oct 02 18:05:28 2009 (4AC5C564)

    --------------------------------------------------------------------------------------------------------------
    STREAM STREAM. SYS MON Jul 13 20:06:18 2009 (4A5BCBFA)
    No info?
    --------------------------------------------------------------------------------------------------------------
    stwrt64 stwrt64.sys Thu Sep 09 03:12:10 2010 (4C8888CA)

    Driver Description: SigmaTel Audio Driver

    Driver update Site: OEM - no to http://www.freescale.com/webapp/search/Serp.jsp?SelectedAsset=Downloads

    --------------------------------------------------------------------------------------------------------------



    --------------------------------------------------------------------------------------------------------------
    TuneUpUtilitiesDriver64 TuneUpUtilitiesDriver64.sys Fri may 25 06:28:19 2012 (4FBF5EC3)

    Please uninstall immediately. This program seems to do more harm than good to your system.

    Delete completely using Revo Uninstaller.

    REVO UNINSTALLER (FREE)
    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    After uninstalling this program, open a command prompt and run the file system (CFS) Checker to verify the intergrity of your system files.

    Remove AVG and replace with Microsoft Security Essentials to see if some of your performance problems are resolved. If you decide that you don't see any remarkable improvement, you can always reinstall AVG.

    Utility to remove AVG.

    http://www.Avg.com/us-en/utilities

    Microsoft Security Essentials

    http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

    If you decide to replace AVG and after completely removing TuneUpUtilities, run (SFC.exe) System File Checker tool to verify the integrity of your system files...

    How to run SFC.exe.

    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    You monitor the system and let us know if you have any other questions.

  • ProBook 4520 s: BIOS LOCKED 4520 s

    Hi, I have a Probook 4520 s and I want to get into the bios, but it says administrator was locked with a password, I see in the forum, I know that you can provide me the Adminisitrator password unlock code for my laptop, I'll give you all the data you need , Thanks for your time and your patience, cordially Juan Pablo

    ProBook 4520 s

    SERIES: (deleted content)

    Product: XR178LT #AC8

    Hello

    Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.

    If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

    Kind regards

    DP - K

  • ProBook 4520 s - exchange of the wireless network card

    Hello everyone.

    I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
    So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

    These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

    Greetings,

    Colony

    Hi, colony:

    You are right about your statement about the cards being described as A/B/G/N dual-band.

    The best thing to do is look at Chapter 3 of your service manual.

    You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

    I see only two possibilities for you...

    The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

    If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

    None of the dual-band cards have embedded bluetooth.

    Link to the service manual.

    http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

    Then, you can order a card on the link below.

    If you do not live in the United States, you can change your country at the top of the page to yours.

    http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

    Paul

  • ProBook 4520 s: lack of features on a ProBook 4520 s after upgrade Windows 10

    Hello dear community

    Long story short: I have a HP ProBook 4520 s and yesterday I upgraded manually (with the tool provided by MS) Windows 7 Pro to Windows 10 Pro. Everything went very well and smooth and it works perfectly well until now.

    The problem is that some of the features of the laptop no longer work. Here are some examples:

    -Highlight the option on touchpad

    -built-in camera

    -Some FN buttons like the one for the brightness of the screen while others (for example, the volume and email) working

    My reasoning is that it lacks certain drivers or these functions are somehwat is not compatible with the new OS (it's a 5 + year old PC after all), but I could be wrong. I'd like to hear some suggestions and opinions on this.

    If someone needs to my specifications complete, there are:

    Operating system: Windows Pro 64-bit 10
    CPU: Intel Core i3 330M @ 2.13 GHz 61 ° C Arrandale 32nm technology
    RAM: 4.00 GB Dual - Channel DDR3 @ 532 MHz (7-7-7-20)
    Motherboard: Hewlett-Packard 1411 (CPU 1)
    Graphics card: monitor generic PnP (1366x768@60Hz)
    512MB ATI Mobility Radeon HD 4500 Series (HP)
    Storage: 1043GB Western Digital WDC WD1001X06X-00SJVT0 (SSD) 42 ° C Black2
    Optical drives: DTSOFT device CdRom virtual hp DVDRAM GT30L
    Audio: AMD High Definition Audio Device

    Thank you for reading. All the tips and comments are appreciated.

    Cap.

    Hello

  • HP ProBook 4520 s Notebook PC - CPU upgrade

    Product: HP ProBook 4520 s Notebook PC
    OS: Windows 7 64-bit

    HELO,

    I want to upgrade the CPU on my laptop. It comes with "Intel i5 m460" - 2 carrots. Is it possible to replace it with a 4 core CPU for example "processor Intel Core i7-720QM Mobile" or "Intel Core i7-740QM Mobile processor"? Is there a rule of thumb to check what CPU can be updated and with which we? What would be the best equipped (to the family of the i7 - 4 cores) CPU update for my situation?

    Many thanks in advance,
    Tom

    Unfortunately, the answer to this question is no.

    The best compatible optional processor is the Intel Core i7-640 M and has two physical cores can run four threads.

    Best regards
    ERICO

  • ProBook 4520 s: recovery disks

    Why my HP Pavilion Elite used recovery disks work in my Probook 4520 s computer laptop?

    Recovery discs are specific to each model. You cannot use a different model PC recovery discs.

  • Kingston ValueRAM 8 GB 1600 MHz: ram HP ProBook 4520 s compatibility

    My computer specs are as follows:

    HP ProBook 4520 s

    Intel core i3 M380 @2. 53 Ghz

    RAM: 4 GB

    OS: 10 64-bit Windows

    I want to buy

    Kingston ValueRAM 8 GB 1600 MHz DDR3 CL11 USBavec 1.5V

    https://www.microsoftstore.com/store/MSCA/en_CA/PDP/Kingston-ValueRAM-8gb-1600MHz-DDR3-CL11-portable...

    This will be compatible with my laptop?

    Thank you

    Hello

    Have you tried an essential tool? It supports only 8GB maximum which means 4 GB x 2. The Kington 8 GB will not work. You can also buy

    https://www.Amazon.com/599092-001-Hewlett-Packard-1333mhz-Pc3-10600-SODIMM/DP/B00DUGHZ3G

    Kind regards.

  • ProBook 4520 button woes right touchpad

    Hi all.

    Got a new HP's Probook 4520 using XP SP3. I noticed that the touchpad is not what it should be in some windows.

    For example. If I open an Excel spreadsheet and right-click on one of the tabs at the bottom nothing happens. That is to say I don't get the submenu where can I change the colors of the tab etc.  With IE8 if I right click on open tabs by using the touchpad I get nothing. With the help of a mouse, I get the normal submenu. However if I right click using the touch pad on the desktop I get the right menu so I know that the equipment works. Strange problem, but it's very irritating. I had a glance through the different touchpad options (there are a lot!) but I can't find anything in this regard.

    Any help would be appreciated.

    Thank you

    Sammy

    Hi again.

    Just to let you know that if I press "Alt" then the button right then disappeared, the menus appear normal.

    Hope that this 'correction' helps someone.

    Sammy

  • HP Probook 4520 s: HP Probook 4520 s and Windows 10 > Bluetooth

    Dear jury,

    has obtained a ProBook 4520 s with a Wifi/Bluetooth Combo of Ralink.

    Updgraded to W10 64bits.

    Everything works fine, exceppt Bluetooth,

    be struggling for 2 weeks and about to give up :-(

    any suggestions, the steps, the pilots could work?

    Thanks in advance

    Christoph, Philippines

    Hi, Christoph:

    Unfortunately the Ralink BT 3.0 or earlier version of hardware does not work in 8.1, W8 and W10.

    Ralink cards with hardware version 4.0 BT have supported for these operating systems.

    If you want internal bluetooth, you will need to replace the Board with one of those enrolled in the service manual wireless.

    The only other wlan supported with BT that I see listed is this one...

    WiFi 802.11b/g/n 1 x 1 Broadcom 2070 Bluetooth 2.1 + EDR Combo adapter and 4313 - reference HP 600370-00.

    I believe that the bluetooth radio and model wireless card will work on W10, but I can't say 100% for sure.

  • ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

    ProBook 4520 s has problem with webcam after upgrade to Windows 10.

    Skype and other software do not have access to the camera.

    Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

    FIX:

    -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

    -Download and install PC Camera Driver from Realtek Realtek support on site area:

    http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

    NB needs to restart.

    Skype now see camera and works OK.

    Solved.

Maybe you are looking for