HP Probook 4520 s not power up! Help with the power button light / stop!

HP Probook 4520 s not power up! The power led button summons and after 3 seconds its the same constituent but still not be able to. Please help me with this problem.

It was the last resort.

Your laptop seems to have a hardware failure on the system board.

It will require the replacement of the card system to return the laptop to a useful condition.

I wish I have had better news for you.

Tags: Notebooks

Similar Questions

  • Satellite A60 power button / light stop in 2 colors. blue & orange

    Hi can someone tell me why power button lights in 2 different colors Blue and orange every thing seemed to be sure best ok
    Thanks in advance

    This will happen if your laptop is in stand by mode.

  • IPsec VPN Phase 2 does not. Need help with the debug output

    Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations.  I'm trying to connect a 2651XM to a Pix 501.

    Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?

    What is the bottom tell me?

    ===========================================================

    01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

    01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

    01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

    Mote 1.1.1.3)

    01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

    01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

    01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

    Mote 1.1.1.3)

    ===============================================================================

    ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2224366689, message ID = 1503891776
    ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
    to return to the State is IKMP_NO_ERR_NO_TRANS
    pixfirewall #.
    pixfirewall # sh crypto is
    ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2649583861, message ID = 1778335964 a.
    ISAKMP (0): removal of spi 4117818781 message ID = 400184159
    status code returned is IKMP_NO_ERR_NO_TRANSkmp its
    Total: 1
    Embryonic: 0
    Src DST in the meantime created State
    1.1.1.2 1.1.1.3 QM_IDLE 0 0
    pixfirewall #.
    ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
    crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
    ISAKMP (0): processing NOTIFY payload Protocol 14 2
    SPI 2163779852, message ID = 2746774364
    ISAKMP (0): removal of spi 212465792 message ID = 923039456
    to return to the State is IKMP_NO_ERR_NO_TRANSexi

    Closure of session

    CCC cryp #sh
    CCC #sh crypto isakmp his
    status of DST CBC State conn-id slot
    1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

    CCC #ping 192.168.1.1

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)

    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)
    CCC #debug isakmp crypto
    Crypto ISAKMP debug is on
    CCC #debug crypto ipsec
    Crypto IPSEC debugging is on
    Crypto CCC talkative #debug
    detailed debug output debug is on
    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
    .....
    Success rate is 0% (0/5)
    CCC #.
    00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
    00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
    00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
    00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:24: ISAKMP: turn 1, AH_SHA
    00:51:24: ISAKMP: attributes of transformation:
    00:51:24: ISAKMP: program is 1 (Tunnel)
    00:51:24: ISAKMP: type of life in seconds
    00:51:24: ISAKMP: life of HIS (basic) of 28800
    00:51:24: ISAKMP: type of life in kilobytes
    00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:24: ISAKMP: authenticator is HMAC-SHA
    00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:24: ISAKMP: turn 1, ESP_3DES
    00:51:24: ISAKMP: attributes of transformation:
    00:51:24: ISAKMP: program is 1 (Tunnel)
    00:51:24: ISAKMP: type of life in seconds
    00:51:24: ISAKMP: life of HIS (basic) of 28800
    00:51:24: ISAKMP: type of life in kilobytes
    00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:51:24: ISAKMP: node set-429221146 to QM_IDLE
    00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-429221146
    00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
    00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
    Ted. "
    00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 1268073006: status = IKE_QM_READY
    00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
    with 1.1.1.3
    00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:51:54: ISAKMP: node set-500877443 to QM_IDLE
    00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
    00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
    00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:54: ISAKMP: turn 1, AH_SHA
    00:51:54: ISAKMP: attributes of transformation:
    00:51:54: ISAKMP: program is 1 (Tunnel)
    00:51:54: ISAKMP: type of life in seconds
    00:51:54: ISAKMP: life of HIS (basic) of 28800
    00:51:54: ISAKMP: type of life in kilobytes
    00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:54: ISAKMP: authenticator is HMAC-SHA
    00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:51:54: ISAKMP: turn 1, ESP_3DES
    00:51:54: ISAKMP: attributes of transformation:
    00:51:54: ISAKMP: program is 1 (Tunnel)
    00:51:54: ISAKMP: type of life in seconds
    00:51:54: ISAKMP: life of HIS (basic) of 28800
    00:51:54: ISAKMP: type of life in kilobytes
    00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:51:54: ISAKMP: node set-701693099 to QM_IDLE
    00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-701693099
    00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
    00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
    Ted. "
    00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node-500877443: State = IKE_QM_READY
    00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
    CCC #sh crypto isakmp his
    status of DST CBC State conn-id slot
    1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

    CCC #ping 192.168.1.5

    Type to abort escape sequence.
    Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:

    00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
    00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
    00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
    00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
    00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:52:50: ISAKMP: turn 1, AH_SHA
    00:52:50: ISAKMP: attributes of transformation:
    00:52:50: ISAKMP: program is 1 (Tunnel)
    00:52:50: ISAKMP: type of life in seconds
    00:52:50: ISAKMP: life of HIS (basic) of 28800
    00:52:50: ISAKMP: type of life in kilobytes
    00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:52:50: ISAKMP: authenticator is HMAC-SHA
    00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:52:50: ISAKMP: turn 1, ESP_3DES
    00:52:50: ISAKMP: attributes of transformation:
    00:52:50: ISAKMP: program is 1 (Tunnel)
    00:52:50: ISAKMP: type of life in seconds
    00:52:50: ISAKMP: life of HIS (basic) of 28800
    00:52:50: ISAKMP: type of life in kilobytes
    00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
    00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-1113601414
    00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
    00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
    Ted. "
    00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 1186613650: status = IKE_QM_READY
    00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
    EXCH
    00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
    with 1.1.1.3.
    Success rate is 0% (0/5)
    CCC #.
    00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
    Global (R) QM_IDLE
    00:53:20: ISAKMP: node set 459446741 to QM_IDLE
    00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
    00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
    00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:53:20: ISAKMP: turn 1, AH_SHA
    00:53:20: ISAKMP: attributes of transformation:
    00:53:20: ISAKMP: program is 1 (Tunnel)
    00:53:20: ISAKMP: type of life in seconds
    00:53:20: ISAKMP: life of HIS (basic) of 28800
    00:53:20: ISAKMP: type of life in kilobytes
    00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:53:20: ISAKMP: authenticator is HMAC-SHA
    00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
    00:53:20: ISAKMP: turn 1, ESP_3DES
    00:53:20: ISAKMP: attributes of transformation:
    00:53:20: ISAKMP: program is 1 (Tunnel)
    00:53:20: ISAKMP: type of life in seconds
    00:53:20: ISAKMP: life of HIS (basic) of 28800
    00:53:20: ISAKMP: type of life in kilobytes
    00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
    00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
    00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = AH, transform = ah-sha-hmac (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
    (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
    local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
    remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
    Protocol = ESP, transform = esp-3des (Tunnel),
    lifedur = 0 and 0kb in
    SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
    00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
    00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
    00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
    Mote 1.1.1.3)
    00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
    00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
    SPI 2237255312, message ID =-1692074376
    00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
    (R) QM_IDLE
    00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
    00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
    Ed ".
    00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
    node 459446741: status = IKE_QM_READY
    00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
    XCH
    00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
    00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
    00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
    State of Ed down
    00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741

    ===============================================================================

    6.2 (2) version PIX

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    activate 8Ry2YjIyt7RRXU24 encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    pixfirewall hostname

    domain ciscopix.com

    fixup protocol ftp 21

    fixup protocol http 80

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol they 389

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol sip 5060

    fixup protocol 2000 skinny

    names of

    permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0

    255.255.255.0

    permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1

    255.255.255.0 0.0

    pager lines 24

    interface ethernet0 10baset

    interface ethernet1 10full

    Outside 1500 MTU

    Within 1500 MTU

    1.1.1.3 outside IP address 255.255.255.0

    IP address inside 192.168.1.1 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    location of PDM 10.10.10.0 255.255.255.0 inside

    location of PDM 10.10.10.0 255.255.255.0 outside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_outbound_nat0_acl

    NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

    Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1

    Timeout xlate 0:05:00

    Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

    p 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    RADIUS Protocol RADIUS AAA server

    AAA-server local LOCAL Protocol

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Permitted connection ipsec sysopt

    No sysopt route dnat

    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

    outside_map 20 ipsec-isakmp crypto map

    card crypto outside_map 20 match address outside_cryptomap_20

    card crypto outside_map 20 peers set 1.1.1.2

    card crypto outside_map 20 game of transformation-Petaluma_VPN

    outside_map interface card crypto outside

    ISAKMP allows outside

    ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m

    Ode

    part of pre authentication ISAKMP policy 20

    ISAKMP policy 20 3des encryption

    ISAKMP policy 20 md5 hash

    20 2 ISAKMP policy group

    ISAKMP duration strategy of life 20 86400

    Telnet timeout 5

    SSH timeout 5

    dhcpd address 192.168.1.5 - 192.168.1.33 inside

    dhcpd lease 3600

    dhcpd ping_timeout 750

    dhcpd outside auto_config

    dhcpd allow inside

    Terminal width 80

    Cryptochecksum:8c0d4948407071d3515f1546cf8bc147

    : end

    pixfirewall #.

    =========================================================================

    CCC #sh run
    Building configuration...

    Current configuration: 1328 bytes
    !
    version 12.4
    horodateurs service debug uptime
    Log service timestamps uptime
    no password encryption service
    !
    CCC host name
    !
    boot-start-marker
    start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
    boot-end-marker
    !
    !
    No aaa new-model
    no location network-clock-participate 1
    No network-clock-participate wic 0
    IP cef
    !
    !
    !
    !

    !

    !

    !

    crypto ISAKMP policy 2

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    address key crypto isakmp 1.1.1.3 cisco123

    !

    !

    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

    !

    map Petaluma_1 1 ipsec-isakmp crypto

    defined peer 1.1.1.3

    game of transformation-Petaluma_VPN

    match address 100

    !

    !

    !

    !

    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0

    automatic speed

    Half duplex

    !

    interface Serial0/0

    no ip address

    Shutdown

    clock speed of 56000

    !

    interface FastEthernet0/1

    10.10.10.2 IP address 255.255.255.0

    automatic duplex

    automatic speed

    card crypto Petaluma_1

    !

    IP forward-Protocol ND

    IP route 192.168.1.0 255.255.255.0 1.1.1.3

    !

    !

    no ip address of the http server

    no ip http secure server

    !

    access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

    control plan
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    Line con 0
    line to 0
    line vty 0 4
    opening of session
    !
    !
    end

    CCC #.

    !
    !
    !
    crypto ISAKMP policy 2
    BA 3des
    md5 hash
    preshared authentication
    Group 2
    address key crypto isakmp 1.1.1.3 cisco123
    !
    !
    Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
    !
    map Petaluma_1 1 ipsec-isakmp crypto
    defined peer 1.1.1.3
    game of transformation-Petaluma_VPN
    match address 100
    !
    !
    !
    !
    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0
    automatic speed
    Half duplex
    !
    interface Serial0/0
    no ip address
    Shutdown
    clock speed of 56000
    !
    interface FastEthernet0/1
    10.10.10.2 IP address 255.255.255.0
    automatic duplex
    automatic speed
    card crypto Petaluma_1
    !
    IP forward-Protocol ND
    IP route 192.168.1.0 255.255.255.0 1.1.1.3
    !
    !
    no ip address of the http server
    no ip http secure server
    !
    access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

    Hi David,

    Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.

    interface FastEthernet0/0

    1.1.1.2 IP 255.255.255.0

    automatic speed

    Half duplex

    !

    interface FastEthernet0/1

    10.10.10.2 IP address 255.255.255.0

    automatic duplex

    automatic speed

    card crypto Petaluma_1

    Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.

    Let me know if it helps.

    Thank you

    Loren

  • Help with the status button widget – I want the button to be transparent, but not the text!

    Basically I have a few images which passed hovered, I you want to lighten and text to appear (it's for a portfolio, so I want the title of the project and a very brief description appear when each image is hovered over). To do this, I had to use the status button widget and set its real part of white button, opacity of 50%, while the image lightens when hovered over. However when I do this the text reduced to an opacity of 50%, but when I select the bit of the text itself, he always says 100% opacity. I need the text to be 100% opacity and non-transparent so it can be easily read.

    Looks like you apply opacity to all button instead of simply filling. When you set the opacity? You should be setting the opacity of the background of the button by using the opacity of fill not the opacity of the effects...

  • help with the menu button and the film load

    Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
    I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
    When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...

    Sending script
    mySender = new LocalConnection();
    on (release) {}
    ------each button corresponds to a different setting... 1,2,3,4,5,6
    _root.mySender.send ("menuconnect", "action", 1);
    ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
    Home.Enabled = false;
    couple.enabled = true;
    Events.enabled = true;
    Bridal.enabled = true;
    Media.enabled|disabled = true;
    RSVP.enabled = true;
    }



    Script of reception

    myReceiver = new LocalConnection();
    myReceiver.action = {function (doThis)}
    If (this == 1)
    gotoAndPlay (2);
    If (this == 2)
    gotoAndPlay (3);
    };
    and so and soforth for all six buttons
    myReceiver.connect ("menuconnect");

    If all this makes no sense at all, I'm sorry... I tried my best...
    If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all

    SJS

    I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

    If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

  • Error message when printing - Communication not available, cannot communicate with the computer

    Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

    I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

    uuggghhhhh!

    flustered2,

    You recently reinstall the operating system? If so, have you installed the drivers in the order?
    How to download and install drivers in the correct order

    First run delete print jobs to remove all print jobs stuck in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer.

    Now you can install the printer using the Dell Printer 924 disc.

    Link to the patch/drivers(if needed) is to...

    Dell 924 Photo-All - In - One Printer owners thread (W7)

    Don't forget the programs anti-virus and firewall will block communications.

    Also try this tweak...

    Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

    Go to the section USB controller, and then click the plus sign +.

    Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

    Restart your computer.

    Rick

  • Need help with the data storage store, local array and network connections

    Need help with my ESXi 4.1 installation

    My hardware:

    I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

    The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

    I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

    My Situation:

    I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

    Help with the data store and network:

    I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

    I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

    Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

    I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

    Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

    You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

    Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

    RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

    You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

    Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

    UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

  • I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

    You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

    Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

    Word

    https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

    PowerPoint

    https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

    There are usb drives that work with iPads, and you can save documents to those who use their own applications.

    http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

    Also I suggest you read through the iPad User Guide:

    http://help.Apple.com/iPad/9/

  • Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

    Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

    Hello

    The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

    http://support.HP.com/us-en/document/c01700855

    Kind regards

    DP - K

  • help with the beats on my envy 17-3270nr, n key

    help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

    Hello

    Download and install the following.

    HP OSD utility.

    Proximity sensor driver.

    Once completed, restart the laptop.

    Kind regards

    DP - K

  • Help with the Powershell script to collect logs from all domain controllers

    I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

    $log = 'application '.
    $date = get-date-format MM-DD-YYYY
    $now = get-date
    $subtractDays = new-object System.TimeSpan 5,0,0,0,0
    $then = $Now.Subtract ($subtractDays)
    $Computers = get-ADDomainController-filter *.
    ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
    Invoke-Expression $env:TEMP\Applicationlog.htm

    Thank you

    Rich

    Hello

    To help with the repost the question script to the script Center Forum

    http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

  • Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

    Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

    I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

    Hello
     
    Please follow the links below to troubleshoot the computer.
     
    Method 1
     
    Connect one microphone, music player or other audio device to your computer

    Method 2

    Step 1

    Troubleshooting: headsets

    Step 2

    Open the troubleshooting of Audio recording

    Method 3

    How to adjust the microphone volume

    a. click Start, type mmsys.cpl in the search box and press ENTER.
    b.
    in the sound dialog box, click the recording tab.
    c. click Microphone, and then click Properties.
    Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
    d. the Microphone Properties dialog box, click the custom tab.
    e. select or clear the box amp Microphone.
    f. click the levels tab.
    g. set the volume to the desired level, and then click OK.
    h. click OK to close the sound dialog box.
     
    How to adjust the setting of the voice
     
    a. start the game.
    b. connect to LIVE (the Guide).
    c. click personal settings.
    d. click on voice.
    e. make sure that the recording volume level indicator records at a bar when you talk.
    f. click done.

    If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.


    I hope this helps.

     
  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

    Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

    Hi mayortom,

    Thank you for visiting the Microsoft answers Forum.

    You can follow the steps outlined in the article below:

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
    http://support.Microsoft.com/kb/910339/

    I hope that helps!

    Thank you and best regards,
    Abdelouahab Microsoft responds to the technical support engineer

  • My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

    Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

    Hi John,.

    Please let me know exactly what happened when you tried my suggestions of first and second.

    Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

    When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

    With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

    Tricky

Maybe you are looking for

  • Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

    The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upp

  • JavaScript does not properly

    When I visit Web sites that use JavaScript popup windows to display the content, if I click on a link, the window will not open. The same sites works well on IE even if. I have not reinstalled FF no chance. I also noticed that the Google search bar a

  • 'white page' shows on the page from home-will NOT load all sites

    When firefox loading, a "blank page" is displayed. In addition, when this happens, no sites are accessible. Display the toolbars at the top. This has happened Each time Firefox opened is today

  • audio input to the air of the ipad

    We have an ipad air we want input audio anilog on my ipad. is there a way? We tried the camera with a usb audio adapter, but the ipad says that it is not supported. The 32 plug is heavy and I don't like the way he wants to bend. What other way can I

  • How can I change the option to scan to pdf to word (deskjet 1055)

    I want to change the scan option fron pdf to microsoft word, when I scan document and or emails.