HP Probook 4530 s: HP Probook 4530 s and Windows 10

Similar Questions

• HP Probook 4520 s: HP Probook 4520 s and Windows 10 > Bluetooth

  Dear jury,

  has obtained a ProBook 4520 s with a Wifi/Bluetooth Combo of Ralink.

  Updgraded to W10 64bits.

  Everything works fine, exceppt Bluetooth,

  be struggling for 2 weeks and about to give up :-(

  any suggestions, the steps, the pilots could work?

  Thanks in advance

  Christoph, Philippines

  Hi, Christoph:

  Unfortunately the Ralink BT 3.0 or earlier version of hardware does not work in 8.1, W8 and W10.

  Ralink cards with hardware version 4.0 BT have supported for these operating systems.

  If you want internal bluetooth, you will need to replace the Board with one of those enrolled in the service manual wireless.

  The only other wlan supported with BT that I see listed is this one...

  WiFi 802.11b/g/n 1 x 1 Broadcom 2070 Bluetooth 2.1 + EDR Combo adapter and 4313 - reference HP 600370-00.

  I believe that the bluetooth radio and model wireless card will work on W10, but I can't say 100% for sure.

• Computer laptop "Probook 4710 s' and Windows 8

  Hello!

  I have a problem with installing a new Windows 8 OS on a Virtual Machine on my laptop (model Probook s 4710). After a few hours of searching in Internet of my problem solutions, I understand I neet to activate the "NX Bit" indicator (never run) in the BIOS, but I can't find this option here. The basic setup of my laptop as follows: Intel Core 2 Duo CPU T6570 2.10 GHz 3 Gb DDR. Please tell me if my phone supports this feature. If so, is it possible to turn it on? Or wait for an update of BIOS one driver for my laptop. Thanks in advance for your answer.

  This feature is not available in the BIOS via the BIOS updates published for your laptop.  I have not heard of any project to make available.

• ProBook 450 upgrade of windows 7 to windows 8

  I just bought a Probook G1 450 with Windows 7 Pro installed.

  What is the best way to upgrade to Windows 8 Pro the supplied DVD?  I work from home if higher security options is not necessary.  The HP support site gives two options - inplace upgrade and clean installation as below.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/upgradeMigrateDisplay/?sp4ts.Oid...

  Also where can I find the Windows product key?

  Thank you.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Sales page of HP for HP p/n F2P35UT - HP ProBook 450 G1 States;

  "Windows 7 Professional 64 (available through Windows 8 Pro downgrade rights)
  Note: This system is preinstalled with Windows 7 Professional software and also comes with a license and support for Windows 8 Pro software. You can only use a version of the Windows software at a time. Switching between versions you need to uninstall a version and install the other version. You must back up all the data (files, photos, etc.) before you uninstall and install operating systems to avoid the loss of your data. »

  This disk is not a standard Windows installation disc and "clean" and "inplace upgrade" options do not apply. Regarding the Windows product key, it must be integrated in the HP Wndows Pro 8 installation media and Windows must be previously activated.

  If you want to reinstall Windows 7 Pro at any time in the future, you create your personal set of HP Recovery / restore before installation discs for Windows 8 Pro included disks.

  HP ProBook 450 G1 of laptop is a class computer business and as such, may be the best answer to your question in the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ProBook 650 G1 and biometric on Windows 8.1

  Hello guys,.

  A friend currently has a problem with a laptop ProBook 650 G1 with Windows Pro 8.1 (64-bit).

  Cannot use the biometric Windows logon for reader - although this feature is natively built on this version.

  Even when the Validity Sensor driver is correctly installed (device looks OK in the Windows Device Manager), the system does not seem to detect it and this function does not appear in the account settings.

  I tried to install several other versions of the driver, nothing changes.

  In addition, the installation of HP Device Access Manager does not work.

  It displays an error near the end of the installation process, and then restore files.

  I did some research on several forums and other sites, but I have not yet found a solution.

  However, this type of connection is very useful, especially on a professional laptop.

  So I find it hard to believe that HP have never been faced with this problem before.

  Maybe one of you can help me to solve it.

  Thank you in advance.

  Problem solved by using the procedure described on this site:

  http://shangwuq.blogspot.fr/2014/10/my-HP-EliteBook-850-G1-was-preinstalled.html

  The biometric reader now appears as "validity sensors (WBF) (PID = 003f)" to the title of the type "Biometric devices" in Device Manager and fingerprint menu configuration is available as a connection option in the menu account management.

  Note: I installed the driver manually the file wbf_vfs_003f.inf.

• Hello I have a HP probook 4545 s and I want to upgrade its hardware

  Hello I have a HP probook 4545 s and I had with an AMD a6 - 4400 m apu and I was wondering how I could upgrade to a better processor, but I don't know how if it will fit or not and if you have any suggestions on processors let me know...

  Help, please

  Go through Page 1, 21, 56, 57 in this manual: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5229461&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03539990%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

  I don't think this will give significant performance compared to your current gain 4400 A6 A8 4500 is the MAXIMUM.

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• ProBook 4530 s: driver for Probook s 4530 after updating windows 10

  Hi all

  I've updated my Probook s 4530 on Windows 10 days back & now three drivers are missing. I tried to auto update in windows update, but it could not find. I know that it is too early to ask for help on the driver for Windows 10 but eager to get a work around.

  Here are details:-

  Pilot 1: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 03E2 also requires installation.

  Pilot 2: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

  Information:-device PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 00E2 also requires installation.

  Driver 3:-unknown device:-location on the Pci Bus

  Information:-ACPI\HPQ0004\3 & 33FD14CA & 0

  Thanks in advance.

  Concerning

  Dev

  Hi, Dev:

  Here is the workaround...

  For the first two, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_116003_1 & swEnvOid = 4132 #tab1

  For the last one, use this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_125640_1 & swEnvOid = 4059 #tab1

• Problem - 4530 Probook s HD 6490M - Windows 8

  Hi, I have a ProBook s 4530 with dual graphics. I can't have the right drivers after the upgrade to Windows 8. Help, please. ATI/AMD does not help :-/

  Hello Jaavehi & TarepSH,
  
  Since your Probook is a professional computer, you would be better served if you have posted your questions in the HP Enterprise Business Business community here: http://goo.gl/LsnuK
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Some updates for W8, most drivers W7 will work in W8.
  
  If you don't have not upgraded to Windows 8 again, you can run the software upgrade wizard, it will scan your PC and report on what is currently installed on your PC is compatible with the W8.
  http://goo.GL/z8LVf
  
  This document will also help provide information about upgrading to Windows 8 http://goo.gl/CO6uV
  
  I hope this helps.

• 4530 s HP probook brightness buttons on windows 7U x 64

  Hello world.

  I started using HP ProBook s 4530 with Intel graphics card on it. Then, I installed Win 7 Ultimate x 64 on that and understood that brightness keys do not work. (sound/music/sleep button controls works very well) Automatic

  Can someone help me solve this problem

  Resolved HP (sp56876.exe) keyboard shortcut support.

• HP ProBook s 4530: problem on Windows 7 x 64 charges drivers install on HP Probook 4530 s

  Hello

  I installed WIndows 7 x 64 fresh on my laptop (not on the recovery disc).  After installing, I ran driver following HP package files, I already had on my laptop.  sp53796 and sp56282.  My audio and video drivers are installed ok.  But I get always wifi and USB.  So, I can't connect to the Internet and download the drivers.  Can someone guide me please to the driver for wifi and USB?  Or a driver package, which would be to install all the necessary drivers?

  Imran.

  Hi, Imran:

  You need this card driver wireless for the device...

  This package contains drivers for the supported Atheros Wireless LAN card in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe

• HP ProBook 4530 s: HP ProBook 4530 s 10 Windows upgrade without WiFi (Atheros AR 9285)

  Last day to update... so time to go. But after launch update process I get an error message on the WiFi card not supported. Can I remove the WiFi card, install Win 10 and maybe later buy card WiFi support for this model?

  Hello:

  You should be able to... Just make sure that connect you cable ethernet so W10 is activated before the deadline.

  I recommend that you get the Intel Centrino® Advanced-N 6230 wireless network card... HP 636672-001 part number, in Chapter 3, page 25 of the maintenance manual.  It is the only card I see on the list that should work on W10.

  NOTE: You MUST get this specific map and it MUST have the part number HP on it or it won't work.

  Usually, I'll question asked by HP part number on eBay, and buy a card which shows the part number in the photograph of eBay listing.

  But an easier thing to do would be to make the W10, installation DVD using the tool of creation of media on the link below, run the upgrade from the windows desktop, select do not automatically check updates and W10 ignores any material control install card atheros in place.

  https://www.Microsoft.com/en-us/software-download/Windows10

  I doubt that the atheros card works after W10 is installed, but you shouldn't remove it just to install W10.

  There is a W10 driver for this card but I find the hardware version of the card that your laptop is too old to work with the driver.

  This package contains the installation package driver for the controller wireless LAN Qualcomm Atheros AR9000-series in the supported models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71858.exe

  OPERATING SYSTEM (S):
  Microsoft Windows 10 32
  Microsoft Windows 10 64

  SUPPORTED DEVICES:
  Qualcomm, Atheros AR9285 802.11b/g/n WiFi adapt
  Qualcomm AR9380 802.11a/g/n WiFi Atheros adapt
  Qualcomm-Atheros 802.11a/b/g/n WiFi adapter AR9462
  Qualcomm-Atheros 802.11b/g/n WiFi AR9485 adapt
  Qualcomm-Atheros 802.11b/g/n WiFi AR9565 adapt
  Qualcomm-Atheros 802.11b/g/n WiFi QCA9565 adapt

• Windows 7 Ultimate HP ProBook 4530 s and my Bluetooth 3.0 does not work?

  Bluetooth does not! Iven not when I had installed Suse Linus.

  So I thout I help you guys out. KILL THE NETWORK when your driver application and the need to restart the computer.

  Link to find your product and find the drivers for the right HP product.

  http://h20614.www2.HP.com/ediags/GMD/ProdDetect4Mozilla.aspx?LC=en&cc=EE

  Of course you need drivers for WINDOWS right right choose!

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=EE&prodNameId=5060882&TaskID=135&prodTypeId=321957&prodSeriesId=5060880

  WINDOWS 7 PRO 64 bit has worked FOR me and JUST USE THE BLUETOOTH DRIVER its dual ATHEROSE as see you WIFI AND BLUETOOTH when you disassemble your PC!

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=EE&prodNameId=5060884&prodTypeId=321957&prodSeriesId=5060880&swLang=13&TaskID=135&swEnvOID=4059

  Driver - network

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=ee&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-93605-1&prodNameId=5060884&swEnvOID=4059&swLang=13&taskId=135&mode=4&idx=3

• network controller for hp probook 4530 drivers s window 7 ultimate 64-bit

  I have recently installed windows 7 ultimate 64-bit, but I can not able to run internet on my windows.

  my hardware ID is:-

  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280

  I want to download the appropriate drivers for my laptop so that I can run wi fi on my laptop

  Hello:

  You need this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108905_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).