HP probook 4530 s: light output to white flashing laptop does not light

Similar Questions

• HP dv6t 3100 laptop does not turn on (but the light)

  Hello...

  My laptop battery 3100 dv6t has is not good enough. It doen't take the load. Power goes off when the laptop on. Suddenlty it will turn off and now I can not turn on. But the charging light turns red for about 1 minute and it turns white after that. But the laptop does not light. What should I do? Help, please.

  Thank you!

  Hello kelum17,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide
  
  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!
  
  Mario

• HP g6-1b60us: my computer hp g6-1b60us laptop does not light.

  My computer hp g6-1b60us laptop does not light.  It was working fine last night. When I tried to turn it on this morning, it not light. When I press the power button, the led by the power cord light flashes 3 times.  I tried the hard reset (remove the battery and the power cord and press the power button / stop for 30 seconds).  What can I do else?

  Please disregard the previous post. I tried a hard reset a second time and was able to get it to the top.

• Computer HP dm4-1160us laptop - does not work - has a white when turned on screen.

  Computer HP dm4-1160us laptop does not work - it has a screen white when turned on.

  See this page for "no starup" advice, if none of these tips help, the laptop will need professional diagnosis.

  Go to this page, select "Error Messages displayed on the computer"

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=43716&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4308941

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  Please visit:creative cloud is empty window why?

  Re: Empty opening creative cloud app

  Cloud Desktop App is empty

  I hope this helps.

  Concerning

  Megha Rawat

• [URGENT] My laptop does not light

  Hello, so my Compaq Notebook 15-a003sa will not start. He also had a problem the day before as a black screen appeared, but I was able to fix it with a hard reset. This time, when I try to press the power button, the led of the wireless button flashes orange. I tried to load, however, when I press the power button, the light on the side of the laptop to become white to indicate he's going to turn it back on and then back to orange. I need my laptop to complete my essay, I tried a hard reset, but it's not effective. The screen remains black.

  Useful information:
  Laptop model: Compaq Notebook 15-a003sa
  Was working fine the night before outside the black screen that was the first time it has occurred
  Laptop is less than 4 months
  I have windows 8

  Hello @XxAnisaxX,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that your laptop is not able to put on with success, and I'd be happy to help you in this case!

  To power your computer on again, I advise you to follow the steps described in this document on the computer does not (Windows 8). I also suggest test the adapter using this resource to helpand the power adapter testing.

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• HP Pavilion 15-n042se: my laptop does not light

  I have HP Pavilion 15-n042se I have connected my laptop to a TV using hdmi, a mouse and an external keyboard... I pushed the power button on the keyboard to hurt and when I tried to put it on again nothing happened all came down... so I searched the internet for this problem and I found that by pushing the power button for 30 seconds and remove the battery and the AC adapter before that could help , but it does not... I noticed that when the AC adapter is plugged in the laptop light refers to the AC adapter on the laptop is also off

  Dear customer,

  Welcome and thanks for posting your question on the Forum from HP Support.

  If there is no noise from the computer fans, the lights on the computer is on and the screen is black, follow these steps to solve the problem.

  1. check that the computer is powered by the AC adapter.
  2. use another adapter.
  3. remove the battery and boot on power supply only.
  4. remove the AC adapter and the battery start only.

  If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the device.

  I would ask you contact HP support for more information.

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• Zbook: Laptop does not light

  If it happened today.
  
  My keyboard is not working all of a sudden (never had it before) so I restarted the computer. During the restart my fans have 100% and the screen shows the signs of hp after 2 minutes. Thought that it was taken way too long so I pressed the power button for 10 seconds and the computer is turned off.
  
  Now the power button lights up, but the computer is not turned on. The button does nothing, pressed for 1 minute. Actually, it turned into a brick.
  
  What on earth could cause this? The laptop is not hot at all, and the battery was at 50%, which is usually 2 hours.
  
  Someone has an idea of what I need to do?

  Well, I tried a hard reset (battery 30 sec) decoupled and that did the trick. Yet, really weird how that did.

• Satellite L - water damage and the laptop does not light

  Hello

  I don't know if this is the right forum for this, but I was just wondering if someone could give me some advice. My brother spilled some water on my laptop 3 days ago (argh!). He immediately turned off and won't start up again. I stamped it towards the top as long as I could, removed the battery and positioned in a V shape to try to help dry. It is still not started. When I plug in the adapter, the screen remains blank, but there is a very low humming noise and the lights flash:

  The power light flashes green very clearly
  Battery green LED flashes weakly
  The hard drive LED blinks green VERY weakly

  I'm really hoping that the laptop is not dead and I'll at least be able to recover my hard drive, but it seems unlikely. I'd appreciate really any advice that anyone can give me in regard to what could be wrong or how I can fix this problem.

  Thank you for taking the time to read this.

  Hello!

  I agree with Luke and the best way is to contact you an ASP. They can check the laptop and tell exactly which parts must be Exchange or not.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  If the HARD drive is not defective, you can backup your data to another PC or laptop as Luke suggested.

  Good bye

• Pavilion dv9700: laptop does not turn on but lights flash

  I have a Pavilion DV9700, service tag dv9925r. When I turn on the power, the power led and the led on top flash, I can hear the fan and drive spinning, but the screen stays black and after one or two seconds the lights out, but then continue to Flash on then close. When, I hear the fan running.

  What I've tried;

  Hung still no display on an external monitor

  Removed and reinstall the memory and hard drive, not good.

  Tried the hard reset, not good.

  I put another hard drive just to see if the disc was not, but no difference.

  There is no audible beeps at all. It does not seem to go through the checkpoint.

  The laptop is dead?

  If this document does not help, contact the HP support directly using the link that I have referred to in the document I have provided.

• ProBook 6570b: VTx is enabled in the BIOS but does not work

  Hello

  I use ProBook 6570 b after update, with Win 7 Profesional 64 b (a second) i'm running a bios F.62 Rev.A April 7, 2015, that I got from HP support web site. I activated the VTx in bios but its seems that this is not enabled (the Microsoft virtualization detection tool used).

  I turned the PC out to the battery, expected 15 min, upgrated bios 2 x and it still does not seem to work.

  Any ideas? Thanks in advance

  Hi, it fixed by uninstalling Avast antivirus, does not help turn it off, you must uninstall it.

  Thanks anyway

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• OfficeJet 100: All the lights are flashing, printer does not respond

  Sometimes when I print a document that contains multiple pages, pops up an error. During the print job, the printer stops work on the intermediate page (for example - second page), spits out the rest of the blank page and all the lights flashing. The printer does not any action, only a hard reset (disconnect battery). After that, he will normally for a same day behavior, and suddenly many, same error. Printer is mainly used through Bluetooth, but the same error occurs also in the cable.

  I checked almost everything I could, there is no paper jam, cartridges are placed correctly, battery is fully charged, also this page http://support.hp.com/us-en/document/c02643100, nothing helped. It's really annoying, when it arrives of the exhausts. How can I solve the problem? Any ideas? Thank you very much.

  He gets these events:

  69556: event_dirty_power_up

  69552: event_log_no_media_pick

  Hey @Mar_tin,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet 100 is having problems with the paper feed. I can help you with that.

  This document describes How to fix paper jams with your printer. If after completing the document, you still get paper jams, the printer will be replaced. You can contact HP support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if this fixes the paper jams or if you have other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Burrito of flash builder design mode is a white screen and does not not all components

  Hey guys, for some reason none of my components appear any, when I go to design mode in flash builder burrito, and the screen is white. When I run the app, it works very well and seems very well my only problem is that I don't understand what is happening in "Design Mode". Someone has a similar problem to this, also, I don't get any errors about not being not able to load the design view just a pop-up that says that it takes a while to load and to continue or not. The only time I see a component is when I go to the source and highlight a component then go into design mode, then u see a blue outline of the component. You can see in my screenshot above. Any help would be great, thanks in advance.

  Thanks again,

  Brian

  Design mode does not work if you include qnx libraries in the path of the libraries due to a bug in FB, there is a flag to uncheck (qnx libraries) in the project to BBT properties