HP probook 4540 print driver s finger
Hello...!
I need the finger print driver for my hp probook 4540 s. I use 8.1 64-bit windows. kindly help me...
Hello
I linked to the page with all the drivers for your specific model below:
The fingerprint device is called: validity (International) fingerprint sensor driver
Please let me know how it works.
Tags: Notebooks
Similar Questions
-
S Bluetooth HP Probook 4540 controller driver
Hello:
You need this driver for the bluetooth device...
-
I've updated all but still, it won't work
Hi Daniel,.
I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.
Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:
Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.
You can also refer to the thread for your reference.
If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.
Back to us for any other questions related to Windows.
-
2003 driver problems server on the laptop HP Probook 4540 s
Hello!
Please help me with problems Server 2003 drivers x 86 on laptop HP Probook 4540 s.
I used xp on HP website drivers, but many would not install, (approx.) message 'unsupported' or the 'minimum requirements is not fulfilled is '.
After several cycles of trial/error, I now lack the pilot of 7650 M AMD Radeon HD, instead of that there is a Standard VGA Graphics Adapter entry in Device Manager with yellow sign, with a value of:
PCI\VEN_1002 & DEV_6841 & SUBSYS_17F4103C & REV_00\4 & 7FAD8D6 & 0 & 0008
and an "unknown device", whith the value of: ACPI\HPQ6000\3 & B1BFB68 & 0
I would also add that I am not completely satisfied with the sound, but I managed to find an IDT driver, which was accepted.
Below is a more detailed description of my system and I thank you for helping me.
P.
============================
SYSTEM
======Operating system: Microsoft (r) Windows (r) Server 2003, Enterprise Edition (version 5.2.3790; build 3790)
Name: Microsoft (r) Windows (r) Server 2003, Enterprise Edition
Version: 5.2.3790
Build: 3790
Install date: 24/11/2013-03:36:56
Service pack: Service Pack 2BIOS: Hewlett-Packard (version: 68IRR worm.) F.42; date: 16/07/2013)
Manufacturer: Hewlett-Packard
Version: 68IRR worm. F.42
Date: 16/07/2013Motherboard: Hewlett-Packard (17F6; version: KBC Version 58.1F)
Manufacturer: Hewlett-Packard
Product: 17F6
Version: KBC Version 58.1F
Chassis: Notebook: Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
Name: Intel Pentium III Xeon processor
Manufacturer: GenuineIntel
Max clock speed: 2594 MHz
Architecture: x 86
Level 2: 256 KB cache size
Socket type: U3E1
Version: Model 10, Stepping 9
: Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
Name: Intel Pentium III Xeon processor
Manufacturer: GenuineIntel
Max clock speed: 2594 MHz
Architecture: x 86
Level 2: 256 KB cache size
Socket type: U3E1
Version: Model 10, Stepping 9
: Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
Name: Intel Pentium III Xeon processor
Manufacturer: GenuineIntel
Max clock speed: 2594 MHz
Architecture: x 86
Level 2: 256 KB cache size
Socket type: U3E1
Version: Model 10, Stepping 9
: Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
Name: Intel Pentium III Xeon processor
Manufacturer: GenuineIntel
Max clock speed: 2594 MHz
Architecture: x 86
Level 2: 256 KB cache size
Socket type: U3E1
Version: Model 10, Stepping 9Physical memory: 7.9 GB
Memory slot: 4.0 GB (BANK 0; form factor: SODIMM; memory type: unknown)
Capacity: 4.0 GB
The device index:-l' location of the bottom 1 (top)
Label of the Bank: BANK 0
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed: 1600 LV
Maximum capacity: 16.0 GB
Memory slot: 4.0 GB (BANK 2; form factor: SODIMM; memory type: unknown)
Capacity: 4.0 GB
The device index:-l' location of the bottom 2 (under)
Label of the Bank: BANK 2
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed: 1600 LV
Maximum capacity: 16.0 GBDisk: WDC WD7500BPVT-60HXZT3 (698,6 GB)
Legend: WDC WD7500BPVT-60HXZT3
Size: 698,6 GB
Manufacturer: (Standard disk drives)
Interface type: IDE
Media type: fixed the hard drive carrier
Bytes per sector: 512
Heads: 255
Cylinders: 91201
Sectors: 1465144065
Other titles: 23256255CD-ROM: hp DS8A9SH to a DVD (CD-ROM)
Name: hp DVD a DS8A9SH
Media type: CD-ROM
Manufacturer: (Standard CD-ROM drives)
Drive: E:Video: Standard VGA Graphics Adapter (XX(b))
Name: Standard VGA Graphics adapt
Current horizontal resolution:
Current vertical resolution:
Course bits per pixel:
Refresh rate:
Memory size:Video: Intel(r) HD Graphics 4000 (1366x768x32b)
Name: Intel(r) HD Graphics 4000
Current horizontal resolution: 1366
Current vertical resolution: 768
Course bits per pixel: 32
Refresh rate: 60 Hz
Memory size: 1.0 GBMultimedia: IDT High Definition Audio CODEC
Name: IDT High Definition Audio CODEC
Manufacturer: IDTMultimedia: Intel(r) Audio display
Name: Intel(r) Audio display
Manufacturer: Intel (r) CorporationNetwork card: Realtek PCIe GBE Family Controller
Adapter type: Ethernet 802.3
NET connection status: connected
Manufacturer: Realtek Semiconductor Corp.Network card: 802.11n Wireless LAN Card
Adapter type:
NET connection state: disconnected
Manufacturer: Ralink Technology, Corp..It's good to know.
I hope it stays like that.
-
HP probook 4540 s support sata 3
Hello.
I want to buy HP ProBook 4540 s and I will replace her with an Sata III SSD HARD drive. So my question is hp probook 4540 s support sata 3 оr no?
Thanks in advance
It works. Nice HP
It's my speed ssd test
My implementation
-
Problem whit Downgrade Probook 4540 s fron windows 7 pro, win xp pro
Hi guys!
I have a laptop HP ProBook 4540 s - B5Q21LT, originally came whit Windows 7 Professional.
I need to downgrade of W7 Pro on Win Xp Pro, but when I am trying to install it on my laptop Windows XP Pro and start loading the files on the CD, stops to load and I get a blue screen that says Windows has been closed down to prevent damage and the next message.
STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
How can I solve this problem? I need work on Win Xp for my work...
Thanks in advance!
Enter seup BIOS and change SATA hard drive in IDE mode controller. Maybe it's to "disable SATA Native mode." not sure how he is listed in the BIOS from probook
-
HP ProBook 4540 s missing device unknown
It's my 3rd day since I bought this new HP probook 4540 s [Nr B9A39PA #UUF] and I like it, I did a clean install of windows 7 ultimate x 64 and I have just realized that the drivers of hp support page dose not has all the drivers for the ultimate version, so I downloaded the proffesional drivers, now I have all the devices are installed except two device named unknown devices Please help.
The hardware ID:
1-unknown device
USB\VID_138A & PID_003D & REV_0104
USB\VID_138A & PID_003D2 - unknown device
ACPI\HPQ6000
* HPQ6000Hello
First of all, download and install the Chipset driver at the following link.
After this Setup is complete, restart the laptop.
When windows has reloaded, download and install the following.
Kind regards
DP - K
-
HP deskjet 6122 s: print driver for hp deskjet 6122 s windows 8.1
Hello
I have a netbook gateway LT 41 P07 with a 8.1 - 32 bit operating sistem and I can´t get install my printer hp deskjet 6122 s.
can you help me figure out a compatibility reader feel sistem for her
You restart the computer after the add a printer process?
As I said there is no direct drivers for your printer on Windows 8.1.
To assign a different print driver in Windows 8:
- Hold your mouse arrow in the bottom right or at the top right, the screen to appear charms bar. If you use a touch screen, you can swipe your finger from right to left.
- Choose the charm of the research.
- In the search box, click settings.
- In the search box, type devices.
- Click devices and printers.
- Right click on your printer.
- Select the properties of the printer.
- Click the Advanced tab.
- Click new driver.
- Click Next.
- Select HP in the first list.
- Select class driver of HP Deskjet PCL3 in the second list. You can also use the Photosmart PCL3 Driver class, PCL3 Officejet class driver, Deskjet 990c or Deskjet 450 driver.
- Click Next.
- Click Finish.
- Click on apply to save the changes.
- Click OK to close the window.
If it doesn't work on everything that you can do is download the installer of Windows 7 32 bit driver of the site then right click on the downloaded file and the compatibility mode.
-
Hello
I have a new HP's Probook 4540, and I have a problem with a microphone attached.
Even the drivers show very well, but Skype or Lync recognize that mic.
And where I can see that microphone attached in my laptop?
Hello
Thanks for your reply.
I corrected it to reinstall the driver and follow in your footsteps. -
Memory stick SanDisk Cruzer Pop does not not on HP Probook 4540
Hello
I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. Have searched the net for possible solutions and followed instructions to look in the Device Manager. It does not appear in the computers tab Device Manager, but in the "Other devices" tab, there are yellow for warning / exclamation symbols next to "Base system device". I right click on the Base system device and properties and it say the following:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver.
Have you tried 'Update Driver' but he said just that no driver can not be found. Would like to get this sort once for all posed the same question problems when I plug my Samsung Galaxy S3 at my Probook too. Would be recognizing all of the useful comments!
Thanx
Mozz1982 wrote:
Hello
I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. ...
Hello
How can you insert a memory stick into a USB port? It's physically impossible? Are you talking about a USB / flash / key reader?
Kind regards.
Update: I know what you're saying here. USB driver on your computer, copy the following link:
-
HP probook 4540 s: dual boot 4540 with SSD and HDD
Hello world
Recently, I replaced my HDD with a SSD on my HP probook 4540 s
Using a HARD drive enclosure, I installed the SSD on the slot of the hard drive and the HARD drive on the DVD drive SATA connector
the two hard drives have win 7 professional 64 bit
When I turn on the laptop, the OS on the SSD starts and I see the HARD drive as a storage drive
Thus, from a material point of view, everything works fine
now, I would like to use two hard drives with the ability to use win 7 times of SSD and HDD
to boot from the HARD drive, I tried to change the boot order put the DVDrom before the hard drive, but it did not work
any suggestion\software tool which may help?
Thank you very much
Giuseppe
To do this, you must choose a single installation as the default and change the BCD in this one to include starting in the installation of other.
Installing Win7 on the internal HARD disk is the best choice because he will always be there.
That change, download and install EasyBCD from Neosmart Technologies. It is a tool on the menu to change the BCD. It is safe to download and use, as I use it all the time.
Once installed, follow these steps:
(1) run EasyBCD
2) click on the button Add a new entrance on the left
(3) in the section on the right operating system, click the Windows tab, and then select the drive that contains the OTHER Windows startup
4) click the button Add an entry
Now when you reboot your machine, you should see a menu with two entries - one for each version of the windows OS.
Good luck
========================================================================
If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.I'm a volunteer and I do not work for, or represent, HP.
-
4540 proBook s: I can not re register my fingerprints on hp probook 4540 s
My HP probook 4540 s was a problem and Windows (Windows 8 Pro) had to be re installed. I put all my fingerprints in HP Client Security prior to the relocation of the said. The problem now is that I can register my fingerprints again. If I try to register it says "this footprint is already registered" if I try to connect with the same finger, he says: "this mark is not verified. What can I do?
Please help me
Hello @ohotuani
Thanks for posting on the HP Forums.
To get your question more exposure I suggest you post in the trade forums since the ProBook s 4540 is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE
Support of your product page can be useful in the meantime: laptop HP ProBook 4540 s
I hope this helps!
-
purchane new hp probook 4540 s not install window
Dear
I have purchane new hp probook 4540 s when I start to install window 7 is show no player not required of pilots at the stage of when we make partiton oou format the drive... Please help me how to make our disc format or tht it shows me the dirve
Help, please
Thank you
It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.
The laptop HP ProBook 4540 s is a class computer business and as such, may be the best answer to your question in the HP Business Support Forum.
Please send BRAVO
-
Epson printer driver does not appear in the printer &; Scanner window
I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?
Mark Romine wrote:
How ca I add the driver to my preferences printers and Scanners?
You do not add a printer driver for printers and Scanners. You add the printer itself.
The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:
(I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)
The Artisan 50 printer seems (but not scanner) software in the Apple driver:
Printer and scanner software available for download for your Mac - Apple Support
Therefore, follow the instructions here:
-
Printer driver for Photosmart C7180 for Windows 8 CP
I'm looking for a basic printer driver for my printer all-in-one C7180 that works with Windows 8 Preview of consumer.
THX. I'll try it
Maybe you are looking for
-
Measure Z to a battery encoder encoder pulse frequency to measure the speed using a 6034 E card
Hello I want to measure the speed of a motor that has an encoder to encoder hung on battery. It provides impulses 3 A, B and Z I uses a PXI 6034 E card. I wanted to know if there are any examples/ideas that could help me with this (I'm new to digital
-
Open the version 12 VI in LabVIEW version 11
Hello I have two screws that have been saved in LabVIEW version 12. However, I am currently running LabVIEW version 11 on my computer. I was wondering if anyone would be able to open these screws and keep them for version 11 for me. It would be mu
-
How can I extend the time of Live View more than 20 seconds on my Rebel T1i
I use my Rebel T1i to astrophography. I need the Yiew Live to update the telescope on an object. However, it turns off after about 20 seconds, forces me to reactivate the Live Yiew button. I need more than 1 minute of live view. How to adapt? PS
-
new curriculum set to take pictures? by default
I have shutterfly Express uploader on desktop, but as it as my default photo program how I would get it in there?
-
Windows 7 drivers for SVe15125cxw?
We received several new laptops SVe15125cxw with windows 8 preinstalled. I am trying to install Windows 7 on these new laptops, but have some difficulty. I do not know if the drivers listed on the Sony site are even intended to be used with Windows