HP probook 4540 s support sata 3

Similar Questions

• Probook 6460 b does support sata 6 GB/s?

  My SATA III SSD only works with SATA II (3 GB/s) transfer rate in any SATA port (hand, upgrade Bay, E-SATA). Is this a limitation set by HP? Or is there something I can do from the setting in the BIOS (I can't find any more)? Update BIOS F.25

  This topic/request was not answered to the last post and I have no confirmation. Can anyone help?

  http://h30434.www3.HP.com/T5/notebook-hardware/does-ProBook-6460b-support-SATA-6Gbps/m-p/1417315/HIG...

  Product: HP Probook 6460 b

  Chipset: Intel HM65

  BIOS: F.25

  OS: Windows 7 Ultimate 32 bit

  HARD drive: Samsung 830 128 GB SSD SATA III

  http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM65.html

  what it you ssd? or it doesn't matter?

  in this thread

  http://Forum.crucial.com/T5/solid-state-drives-SSD/EliteBook-8560p-crucial-M4-256GB-results-normal/TD-p/89564

  the user can get sata speed with crucial when m4 III restored to f.20

• 4540 proBook s: 4540 Probook s MAXIMUM supported memory?

  Hello

  I want to upgrade my 4 GB (1600 Mhz, installed by the factory - I mean HP for sure!) memory on my Probook 4540 s 16 GB (or maybe 12 GB - keeping my primary memory installed), but I read so many complains here, portable computer after upgrade!, and I'm worried about it at the moment.

  Here's my question:

  What is the memory maximum amount I can reach him on my laptop no problem in operation?

  -Note that I installed the latest driver of bias (F.60. worm) that is downloaded from HP for my device (when I was on Windows 64-bit Pro 8.1 - before moving on to 10 Pro 64-bit Windows), and I have no problem with my device right now.

  Thank you

  uvwvs

  Hello

  I do not know. The following book also says the same thing:

  http://www.HP.com/CTG/manual/c03758231.PDF

  My suggestion: use the CPU - Z tool and look at the brand of RAM (in the SPD tab) and then buy the same.

  http://www.cpuid.com/downloads/CPU-z/CPU-z_1.72.1-en.exe

  Kind regards.

• I would do a clean install of windows 7 Professional 64 bit in my hp probook 4540 s

  I would like to do a clean install of windows 7 Professional 64-bit in my hp probook 4540s.after install exactly what are the necessary to install drivers and whence? Thank you

  Hello:

  Here is the link to the support page and drivers for your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&prodTypeId=321957&prodSeriesId=5229455&swLang=13&TaskID=135&swEnvOID=4059

  Now, we can tell you exactly what drivers to install the adapter wireless because he could be one of several models installed in your laptop.

  You must install the following drivers in this order.

  Chipset: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105389-1

  Video: How to know what graphics card is in your notebook (AMD or Intel). Install and reboot.

  Audio: Installation and reboot

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106423-1

  Wired network:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105307-1

  Then these are the drivers, I know that you will need:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-105298-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104954-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-104949-1

  Paul

• Problem whit Downgrade Probook 4540 s fron windows 7 pro, win xp pro

  Hi guys!

  I have a laptop HP ProBook 4540 s - B5Q21LT, originally came whit Windows 7 Professional.

  I need to downgrade of W7 Pro on Win Xp Pro, but when I am trying to install it on my laptop Windows XP Pro and start loading the files on the CD, stops to load and I get a blue screen that says Windows has been closed down to prevent damage and the next message.

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  How can I solve this problem? I need work on Win Xp for my work...

  Thanks in advance!

  Enter seup BIOS and change SATA hard drive in IDE mode controller. Maybe it's to "disable SATA Native mode." not sure how he is listed in the BIOS from probook

• HP Probook 4540 s Notebook Pc: add about additional graphics card in the laptop HP Probook 4540 s

  I have a laptop HP Probook 4540 s Notebook Pc with processor i5 to 3230 m (2.6 GHz) and Intel HD Graphics 4000. I use 4 GB of RAM.
  I want to add Extra internal graphics (like Nvidia).
  Can I do it?
  If so, how? Please explain!

  LOVE_DREAM wrote:
  Is there another way to use a graphics card?

  Hello

  He already has a video chip (card). As mentioned above, no way you can add an external video card in your machine. In fact, there is a way that requires the following steps:

  buy a new motherboard that supports an external video card.

  (b) buy a new video card,

  (c) buy a new cooling system,

  (d) you may need new power supply (charger)

  And at the end of the day, your machine may NOT work as you dream and the total cost would be more than the price of a new, better computer.

  Hope this is what explains a bit more.

  Kind regards.

• HP ProBook 4540 s missing device unknown

  It's my 3rd day since I bought this new HP probook 4540 s [Nr B9A39PA #UUF] and I like it, I did a clean install of windows 7 ultimate x 64 and I have just realized that the drivers of hp support page dose not has all the drivers for the ultimate version, so I downloaded the proffesional drivers, now I have all the devices are installed except two device named unknown devices Please help.

  The hardware ID:

  1-unknown device

  USB\VID_138A & PID_003D & REV_0104
  USB\VID_138A & PID_003D

  2 - unknown device

  ACPI\HPQ6000
  * HPQ6000

  Hello

  First of all, download and install the Chipset driver at the following link.

  Driver Chipset.

  After this Setup is complete, restart the laptop.

  When windows has reloaded, download and install the following.

  Validity sensor driver.

  HP 3D DriveGuard.

  Kind regards

  DP - K

• HP probook 4540 s: dual boot 4540 with SSD and HDD

  Hello world

  Recently, I replaced my HDD with a SSD on my HP probook 4540 s

  Using a HARD drive enclosure, I installed the SSD on the slot of the hard drive and the HARD drive on the DVD drive SATA connector

  the two hard drives have win 7 professional 64 bit

  When I turn on the laptop, the OS on the SSD starts and I see the HARD drive as a storage drive

  Thus, from a material point of view, everything works fine

  now, I would like to use two hard drives with the ability to use win 7 times of SSD and HDD

  to boot from the HARD drive, I tried to change the boot order put the DVDrom before the hard drive, but it did not work

  any suggestion\software tool which may help?

  Thank you very much

  Giuseppe

  @Giuseppe1:

  To do this, you must choose a single installation as the default and change the BCD in this one to include starting in the installation of other.

  Installing Win7 on the internal HARD disk is the best choice because he will always be there.

  That change, download and install EasyBCD from Neosmart Technologies.  It is a tool on the menu to change the BCD.  It is safe to download and use, as I use it all the time.

  Once installed, follow these steps:

  (1) run EasyBCD

  2) click on the button Add a new entrance on the left

  (3) in the section on the right operating system, click the Windows tab, and then select the drive that contains the OTHER Windows startup

  4) click the button Add an entry

  Now when you reboot your machine, you should see a menu with two entries - one for each version of the windows OS.

  Good luck

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• Checklist to upgrade RAM and rules of thumb for HP Probook 4540 s

  Hi people,

  I had a 4540 s HP Probook with 4 GB of RAM (DDR3 1600 MHz PC3-12800). I need to know the checklist for upgrading the RAM. In alternative to the RAM slot, insert a map of 8 GB RAM to make a total of 12 GB? CPUz tells me that my current RAM card manufacturer is Hyundai Electronics. I have to choose the new RAM card from the same provider? What else should I look to the new RAM card to best it would work flawlessly with the RAM that is already installed? What else is there to watch?

  Kind regards

  Adil Khalil

  Mix capabilities and the manufacturers of modules memory unfortunately is generally a step in the path to a memory upgrade failed or problematic.

  If you want to have 8 GB physical memory, either delete the original module installed and use two guaranteed compatible 4 GB memory modules identical or a simple 8 GB guaranteed compatible memory module. Whatever it is. disassembly of the original module will be necessary. For best results use wel lknown memory brands like Kingston, Crucial, Corsair etc. Generic brands are generally not guaranteed compatible.

  Beyond 8 GB is not supported in the motherboard of your laptop.

  Source reference HP proBook 4540 s Maintenance & Service Guide. Your best bet is to buy guarteen 4 compatible

  

• 4540 proBook s: I can not re register my fingerprints on hp probook 4540 s

  My HP probook 4540 s was a problem and Windows (Windows 8 Pro) had to be re installed. I put all my fingerprints in HP Client Security prior to the relocation of the said. The problem now is that I can register my fingerprints again. If I try to register it says "this footprint is already registered" if I try to connect with the same finger, he says: "this mark is not verified. What can I do?

  Please help me

  Hello @ohotuani

  Thanks for posting on the HP Forums.

  To get your question more exposure I suggest you post in the trade forums since the ProBook s 4540 is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: laptop HP ProBook 4540 s

  I hope this helps!

• purchane new hp probook 4540 s not install window

  Dear

  I have purchane new hp probook 4540 s when I start to install window 7 is show no player not required of pilots at the stage of when we make partiton oou format the drive... Please help me how to make our disc format or tht it shows me the dirve

  Help, please

  Thank you

  It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  The laptop HP ProBook 4540 s is a class computer business and as such, may be the best answer to your question in the HP Business Support Forum.

  Please send BRAVO

• can someone help me while I install windows 7 I got massage that windows did not read my DVD my lap top hp probook 4540 i5 s any help pls

  can someone help me while I install windows 7 I got massage that windows did not read my DVD my lap top hp probook 4540 i5 s any help pls

  Hi, Ahmed.

  Have you tried using a different DVD?

  I would also create a USB support and then try to install.

  Take a look at this-

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  To let us know.

• I bought a new hp probook 4540 s, and the fingerprint does not work I installed the new driver but anyway, so help please?

  I've updated all but still, it won't work

  Hi Daniel,.

   

  I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-109053-1

   

  Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106118-1

  Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106091-1

  You can also refer to the thread for your reference.

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/HP-ProBook-4540s-fingerprint-sensor-not-detected-useless/TD-p/1942347

  If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.

  http://h30434.www3.HP.com/

  Back to us for any other questions related to Windows.

• Satellite R830 - support Sata III for SSD drives

  Hello

  Why Toshiba Satellite R830 does not support Sata III, although the plug to motherboard. indicate that it is possible?

  So you can not significantly increase the performance of your laptop by replacing the HARD drive with disk SSD Sata III. Is it possible to activate the Sata III (6 Mbps) on R830?

  All the system settings? It's also kind of bios update request necessary support SSD and SATA III...

  Any help is appreciated! :)

  > It shows that SATA III is supported, but when you install the SSD SATA III disc it does not work with higher speeds to ~ 250 MB/s (cases Crucial M4).

  From my own experience many SSD readers need a updated firmware that is provided by the manufacturers of SSD drives.

  But readers in the R830 SSD seems to support these specifications:
  Host interface: Max 300 MB/s
  Reading data supported: Max 250 MB/s
  Writing data supported: Max 160 MB/s

  By the way: the R830 supports a Mobile Intel HM65 Express Chipset and the chipset supports the storage interface high speed supports up to 6 Gb/s transfer rate for improved data access. Provides up to 6 SATA ports, 3 Gb/s with up to 2 ports support 6 Gb/s transfer rate.

• HP probook 4540 print driver s finger

  Hello...!

  I need the finger print driver for my hp probook 4540 s. I use 8.1 64-bit windows. kindly help me...

  Hello

  I linked to the page with all the drivers for your specific model below:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5269095 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4158%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  The fingerprint device is called: validity (International) fingerprint sensor driver

  Please let me know how it works.