HP ProBook 6440 b: form of inconsistency between documentations of HP?

Similar Questions

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.

• ProBook 6440 b: Probook 6440 b memory block

  I recently bought a HP Probook 6440 b (refurb), only for the purpose of trying 10 windows.

  The first thing I did was replace the puny 160 GB HARD disk with a 1 TB HARD drive and buy 8 GB RAM to replace the cam laptop with 2 GB of RAM.

  After Installing Win 10 and the upgrade of memory, I noticed that my usable reported memory is 2998 8192 MB MB.

  Making a few arround to dig, I learned that it is because my laptop, while the solid case is below on the Department of BONE.

  Belarc shows 2.53 Core i5 M540 64-bit ready Multi-Core system (2 in total) and type hyperthreading (4 total)

  However, from what I found, the 32 bit OS, is to limit my memory to 4 GB total!

  So my quesition is as follows.  Is there a solution?

  I would get all of the 8 GB (or at least more than 2.93).  Is this possible without a major disassembly?  Also, from my research, I think that the reason that the usable memory is that only 2.93 GB is because I have an integrated graphics (GPU) which is aspire little memory.

  Don't know if I can come back 1/2 of a 2 stick memory package, so this may have been a lesson in "read-twice, once arrested.

  You are the very welcome.

  The steps you described are quite right — and Yes, all data will be lost, so I would not invest a lot of effort to do something else until you get the discs.

  If you order by regular mail, the load is about $10 for the scope of delivery.  I usually get them within a few days.

  I don't foresee any problems.

  There is a full set of W7 64 bit drivers on the support page, and there should be no difference in the W10 x 64 conversion.

  The only difference will be that Windows must be able to "see and use" almost the total amount of memory you have installed.

  There may be some memory reserved for the video card if your laptop is the Intel integrated graphics card.

  You will have to start from the W7 x 64 disk operating system in order to install W7 x 64.  It will run from the 32-bit Office.

• HP ProBook 6440 b: update Bluetooth module - is it possible?

  Hi all

  I have a HP Probook 6440 b 10 Windows running. It has a bluetooth module with the manufacturer 537921-001 which is Bluetooth 2.1. Is it possible to improve it with HP ProBook bluetooth module from the manufacturer of 6475 b 655792-001 which is Bluetooth 4.0? I looked at images of the module, the two and they look almost identical... It will work?

  Thanks in advance

  Good news, I bought the bluetooth module I mentioned above and it worked perfectly. The interface is the same, the Device Manager it recognized when I booted up the laptop and then install the driver... and all together. Thank you.

• Upgrade RAM ProBook 6440 b

  Help!

  I'm trying to upgrade the RAM in my probook 6440 b

  It came with 2GB, and I want to bump it up to 8 GB.

  I already have very RAM, but can't access the slots of RAM (other than the one on the bottom of the unit).

  I believe that the slots are located under the keyboard, but I can't find the removal instructions (or better yet, a video)

  Normally trolling YouTube & Google is what I need, but I hit a wall.  Even the videos that I found who claims to be the correct model are not.  In some cases that aren't even from the same manufacturer and no part in the layout of my laptop.

  ICC

  http://h20464.www2.HP.com/results.htm?SID=4095207&MEID=9F975FCA-55BE-47E5-B748-F0BEDAC5B948

  I posted this on your other post.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/RAM-upgrade-question/m-p/5215769#M59262

  If you need more help let me know.

  REO

• HP ProBook 6440 b: no device sensor of fingerprint on my computer laptop probook6440b

  Hello! I just bought Hp - ProBook 6440 b. And there is no device sensor of fingerprint on my laptop. Is this normal?

  Hello

  Quite normal, not all Probook 6640 b are the same:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04140345.PDF

  You can go to the store and exchange for a another 6449 Probook b which has finger print sensor.

  Kind regards.

• ProBook 6440 b: RAM upgrade Question

  Help! I just bought a refurb Probook 6440 b. Only, it came with 2 GB of memory, so I bought an upgrade to 8 GB. However, I can't find any instruction DECENT on the replacement of the RAM. Is there something there?

  @DPChristman

  Step by step remove/replace HP videos here.

  http://h20464.www2.HP.com/results.htm?SID=4095207&MEID=9F975FCA-55BE-47E5-B748-F0BEDAC5B948

  REO

• ProBook 4440S upgrade form

  A question for the masses...

  I have a nice 4440 S Probook I bought at a very reasonable price. I upgraded the CPU of the i3 - 3110M for an i7 quad-3632QM stock and factory 4 GB of memory has been upgraded to a 8 GB faster and bigger. That said, I'd LOVE to upgrade the (in my opinion), ended ugly mast of 1366 X 768 display a brilliant 1600 X 900 better, brighter display. I intend to buy a display of 1600 X 900 and the corresponding display of Probook 6470 B cable. The obvious question: will it work?

  BTW, it has the standard Intel HD4000 graphic chip. Help!

  Thank you for your positive responses.

  Do not try. very likely you are wasting your money. Poster correspond to the panels, bevels, connections, hardware, etc. Even beautiful thought, I would stay away from THIS upgrade

• HP ProBook 6440 b: BIOS/CMOS admin password

  Installing windows 7 Professional, I discovered that I couldn't get into the BIOS or because it was the password for protected configuration. I tried a number of things, including the installation of HP ProtectTools Security stuff and it seems that everything what has done is to create several connection passwords. I can now in the program installation, but as a user, but not as an administrator, and so I can not change password. There is also another screen that shows where I have to enter a password and I don't know if what is happening due to the HP protect tools that I installed and then removed, or something in the BIOS. I uninstalled HP protect tools and reinstall windows 7 and I see still two password screens. I tried to update the BIOS by using a file downloaded from the HP Web site, but can not because I do not know the admin for access to the BIOS password.

  @brublag

  Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  http://welcome.HP.com/country/W1/en/contact_us.html

  When you talk to the HP rep ask them to increase your service request.

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD...  "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Forms of compatibility between Acrobat 8 Pro and Reader 9

  Hello world. I have a problem to be solved as soon as possible. I didn't find answers yet, maybe someone will know what is happening with my forms.

  I'm working on a paper prepared by a different designer, I can't reach that person. When I use its forms, this works in Acrobat 8 Pro and Reader 9, users can fill out forms and save a copy. BUT, I made a change in the forms. I use the editing tools in Acrobat Pro 8, made a copy, but this copy has a problem: users cannot fill forms and save a copy in Reader 9. They can only print the form and fill it out by hand. I don't find no option for my forms made compatible with Reader 9 when I save the copy.

  You have an idea why the original human forms work but not mine? My client is a little crazy

  Thank you!

  Karine

  When they created the form filliable by player. They used the Advanced menu > extend player features...

  To make your changes, or you have to were supposed to go to the file menu and select Save a copy that would have removed the rights reader and allows editing of the form.

  So to make sure you can have drive to fill the form and allow him to be saved or filled and then sent you must return to the Advanced menu and extend the functionality of player... and select new, then save again.

  Note ther is a time 500 limitation by PDF made this way (meaning it can be filled with 500 times) the only other way is to use a special server configuration from Adobe. However, you need to be a company of 250 fortune to pay monthly fees to do this.

• ASO retrieves inconsistent between Excel report and financial in the 9.3.1

  Hi all
  I use basic ASO in the 9.3.1 in the 64-bit Sun Solaris 10 platform.
  
  I found a problem in FR. Please any expert can help with this problem!
  
  I have ASO database with 11 dimensions.
  -Month (time dimension)
  -Year (stored hierarchy)
  -fiscal (stored hierarchy)
  -The script (multiple hierarchy)
  -AmountType (stored hierarchy)
  -FT (stored hierarchy)
  -RC (stored hierarchy)
  -RN (account dimension)
  -WP (multiple hierarchy)
  -Report (dynamic hierarchy)
  -Express in (stored hierarchy)
  
  We have the MDX formula in dimension of report that is placed in the financial status at end of report column.
  However, for some columns/rows, we found that there is no data in the parent level but no data when I developed the dimension of the report. Or, there's data at the level of the child of the dimension of the report but no data to the level parent dimension of report.
  
  When I check cross by Excel. I can extract the data correct at the parent level and child.
  It seems that there is a problem between the financial report and Essbase EN cannot retrieve the data when I develop the column or row in HTML view.
  
  All people find missing data / incompatible data in case of extension of lines/columns in financial report?
  
  Kind regards

  Hello

  Have you had a glance to essbase patch to the latest version (9.3.1.3). I know there have been problems solved with perhaps MDX, it solves the problem that you are experiencing.
  There are also some known problems, it is useful to check the Readme (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/esb_93130_readme.pdf)

  for example MDX. When you use MDX, the Parent function does not have the value relative to all required members. The solution is to set an internal configuration option (2 FormulaOptLevel) to disable the optimization (retroreflective) [6589847 (8-648458764)]

  However, because you see in excel and not in EN question can lay elsewhere, but it is always worth checking.
  Also have you checked EN newspapers to see if errors are generated.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ProBook 6440 b: replace the HARD drive with SSHD on HP Probook 6440 b

  Hello
  I am trying to replace the drive HARD original (Seagate Momentus 320 GB at 7200 RPM) with new SSHD (SSHD Sagate 500 GB;) REF: ST500LM0000). I've updated the BIOS without any problem for the F.60 Rev.A version (November 30, 2015). The operating system, I try to install from the DVD is Windows 10.

  Problem is that the installation process of Windows this new disc see. At the step where you set up new partitions, the disk is not visible.

  The installation process of Windows is an option to load drivers for the drive. It may be enough to have a driver. But I don't know which driver to use.

  Could you please tell me how to correctly install a new drive? BIOS is somehow locked on the original disk? Or in what could be the problem?

  I thank very you much for your time. I'm sorry for my bad English.

  Lukas

  In the BIOS, try to assign device SATA AHCI Mode.

  It's under Advanced > device configurations

• ProBook 6440 b: BIOS administrator password

  I use the HP SoftPaq software to get my updates.  I went to try to update the BIOS and I received the message of doom, "the BIOS is protected by a password. You must enter the password of the BIOS before the system BIOS can be updated. »

  I bought my laptop on the surplus of the State.  BIOS password?  Any ideas on how to recover or remove it?

  The previous user of this PC can have the Setup program the BIOS password.

  You will need to log a ticket with HP to get a reset file.

• Colors are inconsistent between the photo and the printed output. The tones of the printed output are disabled.

  It is a HP Photosmart Plus B210A printer.

  I have almost nine cartridges installed (correctly).

  I did a print quality test and the test page seems to be very good.

  The book that I use is photo of high quality printing paper.

  I use the quality setting of the 'best '.

  Thanks in advance for any advice.

  The problem has been resolved with the link you provided «in regards to material...» ».

  Thank you very much for your help.

  YOU ASKED ME TO SAY IT'S RESOLVED - I CAN'T FIND WHERE DO.

  Can you please answer with where it is?

  Thank you. Jennifer

• Inconsistency between the size of the video clips

  After that I imported my clips and put them in the window source (top left), the video is real and full resolution size. However, when I transfer input/output, or a part of the clip I want, int sequence, the item appears about 40% more narrow in the window of program (top-right). For this reason, a large part of the external images in the frame is cut and invisible, and the edges of the frame are important for video. Anyone know what can cause such a problem and how to fix? I am on first pro CC 2014 and the app is updated.

  Looks like your sequence does not match the format of your video files. In the project click one of your video files and select 'New sequence BOF Clip' this should make the corresponding sequence.