HP probook 6470b - no display

Similar Questions

• 3 displays with my HP ProBook 6470b 230W Advanced Docking Station

  Hi all

  I recently got a new HP ZR2440w monitor that I would like to joing my whole upward.

  Here is my current set up:

  HP ProBook 6470b 230W Advanced Docking Station + an HP L1950 monitor.

  My office is extended from the laptop to the Monitor HP L1950, giving double me poster.

  I would like to extend my desktop to the new monitor HP ZR2440w giving me 3 displays (laptop display + HP L1950 monitor HP ZR2440w monitor)

  For example, my question is: when I extend laptop to ZR2440w so that already granted to L1950 the ZR2440w does not connect.

  Note: I the ZR2440w connected to the docking via Display Port and speak it L1950 via DVI.

  I also tried both monitors on DVI.

  I tried the software graphics intel installed on my laptop but when the laptop lid is opened it will only connect to one of the external monitors.

  What I read I can only support 2 screens at the same time, but I feel like it rather kill to have so many display on the docking station ports and cannot use a while the laptop lid is open.

  Any help is greatly appericated.

  Thank you

  Steve.

  Yes, this was a limitation for awhile. The video controller in the laptop is the pull-out to the dock and it is capable of only configuration "dual head" If you get the screen of the laptop and the screen more.

• ProBook 6470b: mSATA SSD in a Probook 6470 b

  Hey

  I just want to tell you is possble to install an mSATA SSD in a HP Probook 6470b. While I don't see a present pci slot which can be adapted for an mSATA ssd, I don't want to face any questions that he might not be guilty or bios regonise the reader, etc.. My idea is to have the mSATA SDS which will serve as my boot device and have a 1 TB or 2 TB 2.5' HDD for data. Right now I use a samsung 840 EVO SSD 2.5' as my boot drive.

  Kind regards

  Nick

  Here's what it says in the Manual:

  Flash module 24 GB of cache mSATA Intel (Intel Smart Response Technology (SRT), not available on computer models equipped with WWAN or SSD)

  So yes, you can insert a disc of the WSSD in the pci-e slot you see. However, it is designed only to be used as cache acceleration and not as a main boot drive. This means that it will be bootable, but only as long as a regular SATA HDD or SSD is not present. It is the oldest mSATA material used with the Intel Core processors 3rd generation on business models and processors of gen 4th on consumption patterns. Later models can use the slot of the WSSD to boot, but not yours without significant configuration involving a bootloader installed on the SATA drive.

  Your repair manuals

  It is complex so feel free to post back with further questions

• HP probook 6470b pci simple communication driver

  Have a computer laptop hp probook 6470b. Had to reinstall the operating system and can not find the driver of communication simple pci PCI VEN_8086 & Dev_1E3A & subsys_179C103C & Rev_04

  Also unknown device

  USB\Vid_138A & PID_003D & Rev_0104

  USB\Vid_138A & PID_003D

  Hope someone can point to where I can download the drivers

  Install the Intel MEI driver software for the PCI VEN_8086 & DEV_1E3A & SUBSYS_072D1025 & REV_04

  Install the software Chipset driver

  Install the software HP3DDriveGuard

  The drivers are here

  Kind regards

  ERICO

• ProBook 6470b | SSD is not on the F9 boot menu (SanDisk Ext. 128 GB SDSSDX - 120G - G25)

  Hi, I plan to upgrade my 6470bs HDD Probook by adding an SSD: SanDisk Extreme SSD 128 GB with drive caddy.
  I inserted DPS as well, seen and main factors installed on Win7 64-bit, but immediately after I restarted my laptop and has hold down the button ESC > F9 and then I do not see my SSD as a BOOT option.

  Any idea to solve this problem?
  Should what drivers, patches or programs I install to get to zero for the installation of OS Win7 64 bit on my new SSD?

  Thnx.

  Change the image 3

  UEFI boot

  UEFI boot order

  update of the bay at first boot specifications

• Probook 6470b BIOS password

  Hi all

  I want to access Bios from Probook 6470 b but do not have password. Could you please tell how to remove it or what is the default password?

  Thank you

  LAAM.

  There is no main password for ProBooks or EliteBook generators.

  You will need to contact HP.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003

  Or look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility

  Or replace the BIOS chip.

  http://www.eBay.com/ITM/unlock-HP-ProBook-BIOS-password-chip-4340s-4440s-4540s-4740s-4710s-6470b-6570b-/171016291233?PT=LH_DefaultDomain_0&hash=item27d15d83a1#ht_2500wt_1312

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP probook 430 g1 display is empty and flashing

  Anyone having problems with the display when going black and flashing on battery. Press the power button not to bring display on. Turning off suspend and cover also does not change. Seems to happen only when it is on battery power. Should be able to hard down. Occurs randomly.

  Hi simplexct,

  Your Probook 430 G1 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• ProBook 4530 s: display the ProBook s 4530 upgrade required

  Hello!

  I want the upgrade form to my HP ProBook s 4530 of basic HD-ready advance Full HD Panel. Unfortunately I do not see this option here. Is it possible to somehow?

  If Yes, could someone appropriate advice part number.

  Thanks in advance!

  Here is the Service Manual:

  Manual

  HP did not offer a 1920 x 1080, but offered an option of 1600 x 900 on your model.

  See p. 20:

  39.6 cm (15.6-inch) HD + glare, with webcam 647008-001

• mSata update for HP ProBook 6470b

  Hello, I've read here on similar problems, but did not get the clear answer :-(

  Question:

  I have a HP ProBook 6470 b,

  I noticed that there is a slot mSATA and the module cache flash 24 GB of support if WWAN card is not installed (as in this case)

  can I do the following:

  -install a 60 GB mSATA SMS200S3 / 60G

  -change the boot sequence in the bios to boot from mSata first, second HDD

  -install Windows 8 on my mSATA,

  Basically, I want to use windows 8 on my mSATA and leave the HARD drive as a data disc.

  I'm very apprechiate your oppinions!

  or other improvements of the boost to the HARD drive.

  Thank you in advance,

  Here is the Service Manual:

  Manual

  Availability of WSSD player 24 concert for your specific model is not mentioned, but there is no instructions as to where he is or how to access it.

  The WWAN slot will not accept a WSSD. It's a unique calling used only for WWAN. If you've seen specific information that says otherwise let us know but I remember answering a question, there is no if long of someone who has this exact model, wondering why its WSSD disc inserted in this slot didn't work. In other models similar where her WSSD is available but not shown in the manual, the slot is on the motherboard, you must remove the card to access.

  If you install a WSSD you can not use as boot drive without using a bootloader installed on the main drive. The BIOS are written in such a way that the SATA drive will replace an mSATA and the latter cannot be started if a SATA drive is present. Your best bet to speed it up is to get an old regular 2.5-inch SATA SSD, or open it completely and add a 24 concert disk cache and then use Intel quick to start up as an accelerator. This is a major improvement in performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 6470b has separate video?

  I see conflicting reports. All models of 6470b have the AMD Radeon and Intell GPU? I just bought a 6470 refurb HP division b. A very nice unit; No one can confirm the GPU. I do not see an AMD in Device Manager; support suggested to install the AMD driver, but still, it does not show in DM. There is nothing that I see in the related graphics of switching BIOS.

  I can update BIOS, but will not if my unit is not required (i.e. only has 4000 Intel).

  My camera is an i5 CPU (not HD +) NVS, if no aid.

  Thank you.

  Yes, that would be nice.

  Enter the serial # on a Dell PC will give you all kinds of info.

  However, you may be able to find your specific configuration by doing a google search of your product number, which is the other number found on the tile as well as S/N.

  It is fairly new you can find a link to HP for the exact specifications or another place that sold it.

  If your video card is do what you do, it's good.

  I think that video AMD would add a lot of heat to the laptop.

• ProBook 6545b dual display

  Have a problem with my Acer AL1916 C display plugged into the VGA port.

  I can't select the native resolution of the display. Higher resolution windows will allow me to select is 1280 x 720. I want to choose 1280 x 1024.

  Video driver = packaging 8.634.1.2 - 090909 a-088359C-HP driver Version

  OS = Windows 7 Enterprise 64-bit

  Thank you

  Steve

  Fixed in catalyst control center.

  Open the CCC.

  Click chart, and then select Desktop and displays

  Click on the triangle icon of monitor

  Select Configure

  Prolonged use of uncheck display identification data

  Select the maximum resolution of 1280 x 1024

  Select the refresh rate of 60 Hz

  Apply Ok

  Right click on the desktop

  Select the screen resolution

  Click on Monitor 2

  Select 1280 x 1024

  apply

  

• ProBook 6470b: problems after format the laptop and load the W7

  Hi all

  Here are my problems:

  After 2 years using the laptop, I decided to format it and reboot with the disk W7 of professional origin.

  At the same time, I exchanged the original SATA HDD with a new SSD in Kingston.

  After you have installed all the drivers, it seems to work very well and much more quickly, but has two problems:

  1 - the automatic update of Windows does not work. Only is looking for available updates, but it ends, even > 24 h research.

  2. before reinstalling, my battery lasts for 5 hours. Now only 2 to 2.5 hours.

  Does anyone have any ideas on how to solve my problems?

  Thanks in advance.

  Ernest

  Good, glad it worked

  Have you had any success with the BIOS settings? Contact HP support directly for this may be a good idea here.

  Captain_WD.

• ProBook 6470b: cannot find drivers

  Hello

  I have this laptop old another work I installed windows 7 on. Can someone help me with drivers?

  Bluetooth device:

  BTH\MS_BTHPAN

  Broadcom network card:

  PCI\VEN_14E4 & DEV_4359 & SUBSYS_182C103C & REV_00

  Intel 82579V:

  PCI\VEN_8086 & DEV_1503 & SUBSYS_179C103C & REV_04

  Thank you

  ~ Alex

  Hey, Alex:

  Here are links to the drivers you need...

  Bluetooth:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212860&swItemId=ob_132205_1&swEnvOid=4059

  Broadcom wireless network adapter:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212860&swItemId=ob_132049_1&swEnvOid=4059

  Intel 82579V:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212860&swItemId=ob_116056_1&swEnvOid=4059

• ProBook 6470b: need driver for Universal Serial Bus Controller Win 7 64 bit for HP ProBook 6470b

  Hello

  I'm looking for a compatible Win 7 x 64 driver for my USB controller.

  Thank you.

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103C & REV_04
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_179C103C
  PCI\VEN_8086 & DEV_1E31 & CC_0C0330
  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  \Device\NTPNP_PCI0002

  PCI\VEN_8086 & DEV_1E31 & REV_04
  PCI\VEN_8086 & DEV_1E31
  PCI\VEN_8086 & CC_0C0330
  PCI\VEN_8086 & CC_0C03
  PCI\VEN_8086
  PCI\CC_0C0330
  PCI\CC_0C03

  0000001C

  Hello:

  You need this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212860&swItemId=ob_135422_1&swEnvOid=4059

• ProBook 6470b: can I have 1 slot DDR3 and an another DDR3L memory?

  Hi experts,

  Can you tell me if it is possible to have a slot with 4 GB of DDR3 RAM and another with 8 GB of RAM DDR3L (same frequency)?

  I saw him work in my PC, but the DDR3 slot with 1.5V and the other with 1.35v, so I removed DDR3 and I'm only using the DDR3L memory, but it would be good to have 12 GB!

  Whit best regards,

  João Tiago Martins

  Hi all