HP ProBook b 6540 - XP - software errors and drivers

Similar Questions

• HP PROBOOK 450 G0-G1-best network and drivers for my laptop

  Hello. I have a hp probook 450 G0 - G1 with a 64bitwindows 8 and no network or Bluetooth drivers. Which would be the best driver to install on your site?

  Hello:

  Follow these steps, and I will post the links to the drivers you need...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab in the upper part of the window network controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• in error occurred trying to find your application OR software name and path

  Hi all

  I installed Labview2009 in my PC. Now when I try to find the example implementation begun to Labview screen.

  An error popup "error has occurred trying to find your NOR application software name and path. So NEITHER example finder is opening, but do not include examples.

  How can I solve this error?

  Thank you

  -Vishnu

  The first thing I would try is to go to 'Control Panel': ' Add or Remove Programs ", look for National Instruments software and try to do a 'repair' your LabVIEW installation. Otherwise it may require an uninstall, reinstall the entire package.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• Software driver and C4280 install for Windows 7 error

  Try to download the latest version of the software and drivers for the HP Photosmart C4280 printer.  The download seems to fill correctly, but I get the following during the installation process.  Help!

  Process stops with "" fatal error during install it ' "

  Details of the journal are:

  "Now Launching = X:\hpzprl01.exe - inf m preload_drivers - lXXX f"X:hpoins13.dat"- no validation of the '-no. validate

  One or more files referenced by 'X:\hprdv_u.inf' is not found in the package.

  SetupINFListedInDatFile failed with fatal error during installation.

  Exit code = 1603

  Hi jbortohelp, it is regrettable that the issue has not been resolved. I'll give a few comments on what is my thought process:

  In terms of download and install another version of Windows Installer, it is compatible with all versions of Windows, unless an exception is specified. The latest version of Windows Installer is 4.5.

  You can try the workaround installation. You should see the 'recommended' and 'custom' installation options when loading the software. If you select "custom" install, try to install the driver to print only and exclude the rest. If the driver installation is successful, rerun the installation and what you want to install.

  If these steps do not work, I would follow the following instructions to perform a check of the computer system file:

  Go to the start menu and type "CMD" in the search bar. Now, at the top of the menu, you should see a shortcut to CMD. Right-click on it and click "Run as Administrator". If she asks you to administrative authorization, please activate the authorization.

  You should see open command prompt, which is similar to a program with a black background. Type this command and press ENTER after: sfc/scannow

  SFC is short for System File Checker, and he analyzes and attempts to restore corrupted Windows. Run this could find a corrupted file or a service and fix it. Once completed, it will basically say either no corrupted files have been found, corrupted files were found and repaired or corrupt files were found but did not not be repaired. Restart once this over and try to run the task that has been given questions.

  Now, if it is not able to solve the problem, I would make a Windows system restore. When you select the restore point, find the nearest point and use it. Here is more information on performing a system restore: http://windows.microsoft.com/en-CA/windows7/products/features/system-restore

  Unfortunately, if nothing above resolves the problem, you may have to reinstall Windows. If this situation worsens at this point, please let me know. If not, let know me when the problem is solved and what stage appeared to solve.

  I look forward to your reply.

  Mario

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• software error 1394 problem

  Sir my does not.

  my software download iphone 4 1394 sow error

  The software on the iPhone has been jailbroken in the past? If so, this might be a reason for the error, and the jailbreak done your phone useless.

  In some cases, the security software on your computer is the cause, see this article to make sure that iTunes can happen on Apple servers:

  Solve the problems between iTunes and third-party security software - Apple Support

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• VISA 1073807343 errors and 1073807202

  Hello everyone,

  I have several issues with the VISA 5.0.3 and LabVIEW 2010 SP1, and I don't know if or how they are related, so I'll post as much information as I have here. Please excuse the super post long, just trying to be thorough.

  Error BFFF009E (same as 1073807202 I think) appears to the MAX aperture as seen in attached ss1. When you try to open the VISA Interactive Control (IC), I get the message "failed to initialize the library VISA. The VISA interactive control utility will leave. "When I open any VI with a VISA resource and try to click the drop down arrow on the right to see the resources available, the arrow remains derpessed during a second, no field drop-down list is displayed, and then it returns to its original blank State. These problems all live together now, but before I could select BT VISA resources and use VISA IC, while I have always seen the error MAX.

  I tried to fix VISA, as well as VISA uninstall-reinstall 5.0.3 which I believe is the most recent version. No change. I also checked that visa32.dll exists as suggested in the article below. See systeminfo.txt attached to the installed software.

  http://digital.NI.com/public.nsf/allkb/1D1736BFD24A09878625742500241386

  This error seems to be related to an oscilloscope Tektronix DPO 2014 I connected via USB (or maybe something to do with TekVISA?). By this I mean that if the scope was connected when my computer started, this error occurs. When the field is not connected at startup, I don't see the same problems as above. Instead, I get...

  Error 1073807343 (BFFF0011) when you run a VI with a VISA resource to a serial device (see ss2), or connecting to the device in IC of VISA (see ss3). I also always see the error of BFFF009E to the MAX, but not the other problems on front. I can connect to these serial devices in hyperterminal and communicate very well here. Seems similar to the post below and also, I can't find visaconf.ini, but the solution does not apply as I LV 2010. In addition, ironically, I use VISA very well talk to the scope (whether to the MAX or LV) via USB if I connect after booting.

  http://forums.NI.com/T5/instrument-control-GPIB-serial/using-HP34401A-in-LabVIEW-yields-error-code-1...

  I use series of USB adapters made by Ultra (http://mail.ultraproducts.com/product_resources.php?cPath=35&pPath=782&productID=782 ) to go from instruments of series to my USB ports and the computer I'm unfortunately has no serial ports to be tested with, nor do I have another brand of the adapter. I know these converters can sometimes be a VISA problem, but I was certainly with it even without problem before.

  They that all seem to have intermittent problems, because I have seen both before as I have developed and pushed to go to strange as things exchanging (apparently identical) USB extension cables or restart a dozen times. This issue has been driving me crazy for weeks, I am looking for help to try to solve it finally.

  Thank you

  Ratti

  I think I got especially. Looks like it was TekVISA who got in the way, and if Visa32.dll was in the right place, it appeared (in properties > details) as the version of Tektronix, not the version of LabVIEW. After you have uninstalled all Tektronix as well as NI-VISA, he had disappeared, but no money to install or repair NI-VISA would be replaced by a version of LabVIEW Visa32.dll.

  However, with the help of the article from the link below, I discovered that the repair of the installation of the driver NI-VISA DURATION is what replaces Visa32.dll, as opposed to NO-VISA just as messages of error and other links seemed to suggest.

  http://digital.NI.com/public.nsf/allkb/B283196340462DFD86257633006DC799

  Now all the VISA stuff works again, except of course for the scope of Tektronix. I'll keep this battle for the future. Guess I just needed to talk to myself for a while.

  -Ratti

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• The MIG 229771 in c# software error

  Hello

  I use an NI USB-6009 data acquisition.

  I'm unable to create a task using c#, I get a MIG 229771 software error when I try to instantiate with 'myTask1 task = new Task();' or 'task myTask1 = DaqSystem.Local.LoadTask ("D00");' but not when I create a reference ' Task myTask1;

  I get no error when I run the projects in the sample or when I use measurement and Automation Explorer.

  I have added the following references to my project both have a runtime version v2.0.50727:

  1. "C:\Program NIUninstaller Instruments\MeasurementStudioVS2008\DotNET\Assemblies\Current\NationalInstruments.DAQmx.dll" version 9.2.35.32
  
  
  2. "C:\Program NIUninstaller Instruments\MeasurementStudioVS2008\DotNET\Assemblies\Current\NationalInstruments.Common.dll" version 8.9.35.302

  These references appear to be the same as those used in the examples of projects that I can tell.

  As in the projects in the sample, I added the NationalInstruments.DAQmx using statements.

  I've updated my software to version "NIDAQ921f0".

  I use Visual Studio Professional 2010 and I am targeting .NET 3.5 framework.

  I use Windows7 professional 32-bit with admitting privileges.

  I don't have LabView or Measurement Studio.

  I have read the messages for the error message and taken the following steps:

  1. I have repaired/reinstalled the software.
  
  
  2. I confirmed that the services mentioned in the messages are running.

  My .NET framework helpfiles located via the start menu are missing and I have not used c# to control the DAQ before so I could miss something basic.

  Any suggestion would be appreciated.

  Thank you.

  Hi George,.

  Thank you to detail the steps that you have already done, when you say that the examples work fine what they call the start task DAQmx in the same way you are attempting your project? Also you mention that you use a Measurement Studio still your references in the project come from a MeasurementStudio path?

  The only other reason for such an error that I could find was in regard to security issues, you launch McAfee or software NOD32 anti-virus, could you try the program with this disabled in order to see if some material of third party is at the origin of the conflicts with the start method of task?

  Kind regards

• An internal software error occurred. Error code 8. LabVIEW: File permission error.

  I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

  but it after compiling the program showed the error.

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

  Ca person the reasons for which he showed an error.

  

  Hello

  I have a few questions,

  1. If you redefine your controls with constants, that you always get the same behavior?

  2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

  3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
  http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

  You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

  Kind regards

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-