HP ProBook Hibernate problem (he wakes up suddenly)

Similar Questions

• Windows 7 hibernate problem

  Hi all

  My HP Pavilion dv6-2113tx with Windows 7 SP1 installed does not seem to be able to successfully Hibernate more. When I click on Hibernate mode, the screen shuts off and then suddenly flashes and the screen stays off, while the PC stays on. If I then move my mouse powers of the screen, indicating that the laptop is not actually spent in sleep OR hibernate.

  Would it be possible due to the partition of Windows 7 is not not active? If this is the case, is there anything else I can use to make my PC into Hibernate?

  Thank you

  Dean.S

  Hi all

  As I have suggested, the problem was caused by Windows 7 is not not a partition active. Alas, I set the partition active and then tried hibernation Win7, and oddly enough, it worked. Why Microsoft made Windows like that? -Answer: No reason.

  Thanks for your help,

  Dean.

• N100 wireless / Hibernate problem

  Hello
  I don't know why all of a sudden a N100, (maybe Windows updates) whenever I put Hibernate my laptop and come out of hibernation it disables my wireless card with somehow. The only solution is a reboot.

  I have run the updates using the update of the Lenovo BIOS update system and nothing seems to solve this problem. I use the application windows wireless and have uninstalled the ThinkVantage Access Connections.

  I also have an alert of the weird when program ends the attempt to reboot "End program - CssAuthHiddenWindow", I checked online and it said something about being a Lenovo software, could it be related to any of the questions?

  Please please help! Thank you

  Unfortunately, the only solution was reload the whole machine! It works now so I guess that we will never know what the problem was.

  I hope this helps.

• Re: Hibernate problem awake on Satellite A210

  Hello

  I have Satellite A210-199 + Win7 rc (build 7100) / before the use of previous generations.
  I have a problem: about a minute after awake hibernate, windows is frozen 100% of cases.

  Anyone know?
  How can I solve this problem?

  Hi mate

  Have you noticed the same question OS using the preinstalled OS (Vista) Toshiba?
  You said you use the Win 7 at this time it s only a beta (built RC) and I think that there are still some bugs.

  If you didn t notice the same problems with the previous operating system in my opinion the problem it linked definitively to the preinstalled Windows 7.

• Re: Satellite Pro U300: critical battery Vista hibernate problem

  Hello

  I have a Satellite Pro U300 PSU31E and have problems with the critical level of batteries and hibernation since I got it.

  It comes with Vista Business

  Critical battery level is set at 2% - is the the strage thing if I hit Hibernate mode (via the power button or start > Hibernate) it have hibernated ok - even at 2% remaining battery. However if I leave it to do this automatically (via the action of critical battery and critical battery level Windows) he died just in hibernation - looks like it ran out of power. The only way I can operate automatically through Windows is by setting the battery level critical to 8% (he dies still in hibernation on what whether it is less than 8%).

  Normally you would just say ok the critical low level must be higher but one) why when I Hibernate manually less than 8% is working perefectly and b) put 8% loses me a good a few minutes! and (c) especially the computer or the battery do not think they are flat at 8% - then, the problem is that it allows you to restart. When the computer starts less than 8%, he has already missed his firm critical point 8% so then just down and down with no further action of the battery until it dies. My XP laptop would be closed, then the computer would know the battery is flat and do not allow a restart up to the critical load of 3%.

  What is one thing Vista or Toshiba?

  Probably not the battery I have 2 with exactly the same problem

  I have all the latest drivers for the power and Vista SP1 and latest version of the BIOS

  Thank you

  Hi David

  I think it s not a Vista problem or question Satellite U300.

  The point is that the OS Vista needs a lot of resources and more energy than the older Microsoft operating systems.

  Always is it that same laptop with pre-installed Win XP would be a lot more time using the power of the battery as with Vista OS.
  Vista is a monster and he eats all the material resources.

  This means that if you use the Vista operating system, you must set the parameters of critical battery at a higher level to make sure that your laptop (Vista OS) would end Hibernate process correctly.

  I think that the last 2% of the battery power is simply not enough to put the laptop into hibernation mode.

  So don't worry, relax and enjoy your beautiful baby ;)

  Welcome them

• Ethernet problem on wake since 10.11.2

  Since I installed the latest (10.11.2) El Capitan refreshes, if my end 2013 27 "iMac wakes up, intermittently, the network does not work (browser cannot load a URL, Mail does not work, etc.).  It is not just DNS as incoming IP addresses does not work either.  The machine is connected by Ethernet, no wifi, and the wifi is turned off.  The machine has a fixed IP address on my home network and don't use DHCP.

  When the failure occurs, if I disconnect the Ethernet cable from the back of the Mac and reinsert immediately, networking features are restored. This machine has worked perfectly in this mode because I bought it in March of 2014; It is the first time I've seen this kind of problems when he wake up.  I usually put to sleep using Cmd + Option + Eject or leave it to sleep alone. Intermittent failure in the morning seems to be independent of the way in which he fell asleep.

  Anyone has any ideas I could try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Problems of Defrag - defragment suddenly stops indicating that some files on this volume cannot be defragmented

  When I try to defragment my computer, it suddenly stops indicating that some files on this volume cannot be defragmented. A way to solve this problem? I made the center of Fix-It without solving the problem. Anyone with a fix?

  Before defragmentation utility to run Disk Cleanup. Some files cannot be defragmented, because they

  are in use... To solve the problem, open the file system, advanced, performance,

  swap file, click on the button 'Edit' L.click on the C: drive, the value "no page file" click on set 2 X,

  close, restart the pc... Go back to xp, in run, type: cmd cmd type: Defrag C:

  Once her thru, type: EXIT reopen system, set C: "let the system manage", click on set 2 X,.

  close, commit to rewrite a new file, restart the pc.

  It works best if you have a 2nd HD installed with a pagefile on this too, in the form of windows

  requires a file permanently...

• Hibernate problem (watch only underscore flashing upward)

  Nice day

  I have this problem in my laptop when I Hibernate it, then start again after a while, and then it displays "Windows Recovery" with the logo of Windows, but after that only a blinking nothings and underscore appears then it just restart it by his own if I leave it alone, then report me to some unexpected or stop error.

  I would like to ask how can I solve this problem, because I think, this can lead to some other critical errors.

  Kind regards

  Jean-Sébastien

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• VISTA HIBERNATE PROBLEM

  PLEASE SOMEONE HELP ME!

  HIBERNATION OPTION HAS DISAPPEARED FROM THE MENU START. I READ IN THIS FORUM SOMEONE SUGGESTING:

  ' Start - cmd -powercfg h '

  WHEN I DO, I GET THE MESSAGE THAT I DON'T HAVE PERMISSION TO ENABLE OR DISABLE THIS FEATURE.

  I AM THE ONLY USER OF THE COMPUTER.

  MY OTHER PROBLEM SMALLER, IT IS THAT SOMETIMES, WHEN I PUT IT TO SLEEP HE RETURNED AFTER

  20 SEC. I TRY SEVERAL TIME TO CURE INSOMNIA.
   
  

  
  

  Hi lessdense,

  It might be because of the option "wake on lan" in the BIOS. Personally, I have disable this feature because, in my case, the computer still hanging in the life every time the phone rang or a fax came.

  Normally I would disable the "wake on lan" of in the PC BIOS, however, it can be disabled via Device Manager. This link will show you how:http://www.howtogeek.com/howto/windows-vista/fix-sleep-mode-randomly-waking-up-issue-in-windows-vista/

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web:http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Wakes up suddenly in the night before

  My Windows 7 is in standby mode, sometimes it wakes up automatically and unexpectedly. I'm sure that the mouse, the keyboard and the switch are not affected and displaced.

  How to solve this problem without having to buy this software?

  Search for 'Power Options' and select

  Then select "balance of power"

  Click on "change settings"

  Click on change Advanced power settings

  In the list, search for '+ sleep'

  Click on '+ allow you to wake up veterans

  Make sure that they are two people with reduced mobility

  On battery: disabled

  Plugged in: disabled

  Click OK.

  Click on save changes.

  Fact!

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• Light HP ProBook 4540 problems s display

  Product name: HP ProBook s 4540

  : Product number product number: H5J01EA #ACQ

  And I am currently using Windows 8.1 Pro 64-bit

  A few weeks, my computer was on and I left it to go do other things... when I got home, display exploded automatically as I put to do after unused 30minutes. So I moved the mouse so he can come back... However, when she came back, the contrast of the display was really very bright (to the point where I could barely see/read anything and it hurts my eyes). I ended up having to close, and then turn on the computer again to return to normal.

  At the time, I thought it was a one-time phenomenon... but now it happened more consistently and I'm not sure what to do about it. Should the screen replace? The computer is only 7 months old so I hope its nothing too serious!  Help, please!

  Hello Nineteen92,

  I understand that you view guard goes really bright and you are looking to solve. I think that an update came and he is not sitting correctly with your operating system. I will advise you a window system restore back to a point in time before when the problem happened the first time. If you look at and follow the steps in the HP Support document: use Microsoft System Restore (Windows 8) you should be able to resolve your issue with the brightness.

  I believe that the foregoing may solve your problem. Thanks for posting your question on the Forums of HP. Have a great day!

• R60 Eve + hibernate problem

  Hi all, I have Windows XP Pro installed on my R60 and I can´t do the sleep or Hibernate mode. I have the new installed power management driver and I Don t have the option of standby or Hibernate in the menu stop. Also I have the possibility of FN + F4 paused, and the lid closed sleep option value but it doesn´t work... Can you help me please?

  Hello Thinkpatz,

  I have this solved my problem of Hibernate. I reinstalled an application that I work with and now standby and hibernation works very well. I thank very you much for your help and advice.

  Good day.

• Install LCD screens: Hibernate problem

  Hello

  I tried by following the steps in http://help.Adobe.com/en_US/LiveCycleDataServicesES/3.1/Installing/lcds31_install.html#JBo ss

  Here we use OpenSuse with JBoss 4.2.1. So I extracted the screens LCD - samples.war to /opt/jboss/server/lc_mysql/deploy/lcds-samples.war/ then restart JBoss. But there are errors:

  2011-07-07 13:22:40,139 INFO  [org.jboss.web.tomcat.service.TomcatDeployer] deploy, ctxPath=/lcds-samples, warUrl=.../deploy/lcds-samples.war/
  2011-07-07 13:14:23,285 INFO  [STDOUT] [LCDS][WARN] No login command was found for 'JBossWeb/2.0.0.GA'. Please ensure that the login-command tag has the correct server attribute value, or use 'all' to use the login command regardless of the server.
  2011-07-07 13:14:23,587 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Environment <clinit>
  INFO: Hibernate 3.2.5
  2011-07-07 13:14:23,593 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Environment <clinit>
  INFO: hibernate.properties not found
  2011-07-07 13:14:23,595 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Environment buildBytecodeProvider
  INFO: Bytecode provider name : cglib
  2011-07-07 13:14:23,598 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Environment <clinit>
  INFO: using JDK 1.4 java.sql.Timestamp handling
  2011-07-07 13:14:23,640 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Configuration configure
  INFO: configuring from resource: /hibernate.cfg.xml
  2011-07-07 13:14:23,641 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Configuration getConfigurationInputStream
  INFO: Configuration resource: /hibernate.cfg.xml
  2011-07-07 13:14:23,683 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Configuration addResource
  INFO: Reading mappings from resource : flex/samples/contact/Contact.hbm.xml
  2011-07-07 13:14:23,753 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.HbmBinder bindRootPersistentClassCommonValues
  INFO: Mapping class: flex.samples.contact.Contact -> contact
  2011-07-07 13:14:23,772 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.cfg.Configuration doConfigure
  INFO: Configured SessionFactory: null
  2011-07-07 13:14:23,824 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: Using Hibernate built-in connection pool (not for production use!)
  2011-07-07 13:14:23,824 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: Hibernate connection pool size: 1
  2011-07-07 13:14:23,825 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: autocommit mode: false
  2011-07-07 13:14:23,826 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: using driver: org.hsqldb.jdbcDriver at URL: jdbc:hsqldb:hsql://localhost:9002/flexdemodb
  2011-07-07 13:14:23,827 ERROR [STDERR] Jul 7, 2011 1:14:23 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: connection properties: {user=sa, password=****}
  2011-07-07 13:14:24,237 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: RDBMS: HSQL Database Engine, version: 1.8.0
  2011-07-07 13:14:24,237 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC driver: HSQL Database Engine Driver, version: 1.8.0
  2011-07-07 13:14:24,251 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.dialect.Dialect <init>
  INFO: Using dialect: org.hibernate.dialect.HSQLDialect
  2011-07-07 13:14:24,263 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.transaction.TransactionFactoryFactory buildTransactionFactory
  INFO: Using default transaction strategy (direct JDBC transactions)
  2011-07-07 13:14:24,266 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.transaction.TransactionManagerLookupFactory getTransactionManagerLookup
  INFO: No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
  2011-07-07 13:14:24,266 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Automatic flush during beforeCompletion(): disabled
  2011-07-07 13:14:24,267 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Automatic session close at end of transaction: disabled
  2011-07-07 13:14:24,267 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC batch size: 15
  2011-07-07 13:14:24,267 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC batch updates for versioned data: disabled
  2011-07-07 13:14:24,272 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Scrollable result sets: enabled
  2011-07-07 13:14:24,272 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC3 getGeneratedKeys(): disabled
  2011-07-07 13:14:24,273 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Connection release mode: auto
  2011-07-07 13:14:24,273 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Default batch fetch size: 1
  2011-07-07 13:14:24,274 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Generate SQL with comments: disabled
  2011-07-07 13:14:24,274 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Order SQL updates by primary key: disabled
  2011-07-07 13:14:24,275 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Order SQL inserts for batching: disabled
  2011-07-07 13:14:24,275 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory createQueryTranslatorFactory
  INFO: Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory
  2011-07-07 13:14:24,277 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.hql.ast.ASTQueryTranslatorFactory <init>
  INFO: Using ASTQueryTranslatorFactory
  2011-07-07 13:14:24,278 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Query language substitutions: {}
  2011-07-07 13:14:24,278 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JPA-QL strict compliance: disabled
  2011-07-07 13:14:24,279 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Second-level cache: enabled
  2011-07-07 13:14:24,279 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Query cache: disabled
  2011-07-07 13:14:24,279 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory createCacheProvider
  INFO: Cache provider: org.hibernate.cache.NoCacheProvider
  2011-07-07 13:14:24,280 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Optimize cache for minimal puts: disabled
  2011-07-07 13:14:24,280 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Structured second-level cache entries: disabled
  2011-07-07 13:14:24,285 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Echoing all SQL to stdout
  2011-07-07 13:14:24,285 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Statistics: disabled
  2011-07-07 13:14:24,286 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Deleted entity synthetic identifier rollback: disabled
  2011-07-07 13:14:24,286 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Default entity-mode: pojo
  2011-07-07 13:14:24,287 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Named query checking : enabled
  2011-07-07 13:14:24,309 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.impl.SessionFactoryImpl <init>
  INFO: building session factory
  2011-07-07 13:14:24,490 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.impl.SessionFactoryObjectFactory addInstance
  INFO: Not binding factory to JNDI, no JNDI name configured
  2011-07-07 13:14:24,630 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: Using Hibernate built-in connection pool (not for production use!)
  2011-07-07 13:14:24,631 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: Hibernate connection pool size: 1
  2011-07-07 13:14:24,631 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: autocommit mode: false
  2011-07-07 13:14:24,631 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: using driver: org.hsqldb.jdbcDriver at URL: jdbc:hsqldb:hsql://localhost:9002/flexdemodb
  2011-07-07 13:14:24,632 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.connection.DriverManagerConnectionProvider configure
  INFO: connection properties: {user=sa, password=****}
  2011-07-07 13:14:24,636 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: RDBMS: HSQL Database Engine, version: 1.8.0
  2011-07-07 13:14:24,636 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC driver: HSQL Database Engine Driver, version: 1.8.0
  2011-07-07 13:14:24,637 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.dialect.Dialect <init>
  INFO: Using dialect: org.hibernate.dialect.HSQLDialect
  2011-07-07 13:14:24,638 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.transaction.TransactionFactoryFactory buildTransactionFactory
  INFO: Using default transaction strategy (direct JDBC transactions)
  2011-07-07 13:14:24,638 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.transaction.TransactionManagerLookupFactory getTransactionManagerLookup
  INFO: No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
  2011-07-07 13:14:24,638 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Automatic flush during beforeCompletion(): disabled
  2011-07-07 13:14:24,639 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Automatic session close at end of transaction: disabled
  2011-07-07 13:14:24,639 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC batch size: 15
  2011-07-07 13:14:24,640 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC batch updates for versioned data: disabled
  2011-07-07 13:14:24,640 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Scrollable result sets: enabled
  2011-07-07 13:14:24,641 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JDBC3 getGeneratedKeys(): disabled
  2011-07-07 13:14:24,641 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Connection release mode: auto
  2011-07-07 13:14:24,641 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Default batch fetch size: 1
  2011-07-07 13:14:24,642 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Generate SQL with comments: disabled
  2011-07-07 13:14:24,642 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Order SQL updates by primary key: disabled
  2011-07-07 13:14:24,643 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Order SQL inserts for batching: disabled
  2011-07-07 13:14:24,643 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory createQueryTranslatorFactory
  INFO: Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory
  2011-07-07 13:14:24,644 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.hql.ast.ASTQueryTranslatorFactory <init>
  INFO: Using ASTQueryTranslatorFactory
  2011-07-07 13:14:24,644 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Query language substitutions: {}
  2011-07-07 13:14:24,644 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: JPA-QL strict compliance: disabled
  2011-07-07 13:14:24,645 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Second-level cache: enabled
  2011-07-07 13:14:24,645 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Query cache: disabled
  2011-07-07 13:14:24,646 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory createCacheProvider
  INFO: Cache provider: org.hibernate.cache.NoCacheProvider
  2011-07-07 13:14:24,646 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Optimize cache for minimal puts: disabled
  2011-07-07 13:14:24,646 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Structured second-level cache entries: disabled
  2011-07-07 13:14:24,647 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Echoing all SQL to stdout
  2011-07-07 13:14:24,647 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Statistics: disabled
  2011-07-07 13:14:24,648 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Deleted entity synthetic identifier rollback: disabled
  2011-07-07 13:14:24,648 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Default entity-mode: pojo
  2011-07-07 13:14:24,648 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.cfg.SettingsFactory buildSettings
  INFO: Named query checking : enabled
  2011-07-07 13:14:24,652 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.impl.SessionFactoryImpl <init>
  INFO: building session factory
  2011-07-07 13:14:24,656 ERROR [STDERR] Jul 7, 2011 1:14:24 PM org.hibernate.impl.SessionFactoryObjectFactory addInstance
  INFO: Not binding factory to JNDI, no JNDI name configured
  

  I tried the next part in the documentation (I know, we do not use 5.x, but just to be sure if it helps):

  •It is a problem of conflict of library of hibernation when you deploy LiveCycle Data Services applications to JBoss 5.x servers. You can avoid this problem by creating a file jboss - classloading.xml in your web application's WEB - INF directory. The file should contain the following text. Change references to the web application of screens LCD liquid samples to match the name of your web application.
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < classloading xmlns = "urn: jboss:classloading:1.0" name = "LCD - samples.war.
  domain = "LCD-samples_domain" >
  area-parent = "ignored".
  export-all = "NON_EMPTY."
  import-all = "true" >
  < / classloading >

  Unfortunately what it did not help. So could you help me please?

  Floh Cu

  Hello

  If find you a facility of JBoss 4.2.1 standard, you should not have to add the classloading xml / any configuration change. You must:

  1 choose the screens LCD - samples.war of your installation and turn form exploded under the deployment folder.

  2 make sure that the HSQLDB is started by running the startdb.bat script in the sampledb folder in the installation of screens LCD 3.1.

  Now just restart the server should be all you need to do.

  Rohit

• Problem with the password suddenly failing to authenticate with MSN

  Hello. I use Thunderbird version 24.5.0. on a Windows Vista operating system.
  I use a pop framework to connect to my email.

  My problem is when I try to check my e-mail MSN.com of Thunderbird account, I get the error message:

  "Sending of password did not succeed. Mail server pop3.live.com responded: authentication failed"
  

  This just started happening earlier today after having worked well for a very long time. I tried a number of things to solve this problem, including empty them the saved passwords, then reset my password on MSN and then to try the new password and nothing did. If I connect directly from the web browser on e-mail MSN account, it works fine. As far as I can see the password and user name that matches the full email address is entered correctly. Thanks for any help!

  OK I solved the problem.

  I looked through all the account settings hotmail/msn and found the so-called step 2 audit was active on the account. I do not remember to activate but I disabled it and everything works fine now.

  Here is some info on step 2 check and mail apps:

  http://Windows.Microsoft.com/en-CA/Windows/two-step-verification-FAQ