HP ProBook s 4740: HP ProBook 4740 s SATA III support

Similar Questions

• HP ProBook 450, which interface inside? SATA II? SATA III?

  Hello world.

  I would like to change the HARD drive in 450 ProBook for SSD Samsung 840 EVO (2.5 ", 250 GB SATA III), compatible with SATA II.
  And I can't find anything on the interface type in 450 PB HP.
  So please help me, Samsung SSD works using SATA II or SATA III speed?

  Thanks in advance for help
  mickowa

  You are the very welcome.

  It would be the same: SATA III

  Your laptop is the Intel 7 series chipset and the G1 has the Intel® 8-series chipset.

  All laptops with an Intel 6 series chipset or newer computers have SATA III to support.

• HP PROBOOK 450 G2 I7: "HP PROBOOK 450 G2 I7" does support virtualization technology?

  I want to buy a new HP laptop and it must support virtualization so I can use programs such as VMware and Virtualbox.  'HP PROBOOK 450 G2 I7' he takes?
  Thank you

  @Mounirian

  Check your BIOS.

  

  REO

• HP ProBook 470 G1: Recommendations HP Support Assistant

  HPSA has recently informed me that it is recommended I have install the following SoftPaq: SP64824, SP67047, SP68293, SP63779 and SP66915 on my ProBook 470 G1 laptop. When I try to use HPSA application to download and install the SP, downloads take forever and eventually crash or download timeout. I searched on HP support download page in vain to find MS above to try and download and upgrade and do not use the HPSA application. Can someone direct me to where I can find of MS above driver to download directly on the site of HP?

  Looks like a glitch in HPSA. I searched several of these MS and found nothing. They can even be SP who were fired for one reason or another. Not sure why HPSA is always 'return' as available.

• [ProBook 6450 b] 104-no supported Intel Advanced - N 6200 wireless network

  Hello

  I have a ProBook 6450 b with the latest bios (F23) and remove the Broadcom wireless network and replace it with a new l an Advanced - N 6200 (support 300Mbps) and 5 GHz Intel.

  Before I buy this wireless, I downloaded the manual and this wireless network is supported.

  http://h18000.www1.HP.com/products/QuickSpecs/13616_ca/13616_ca.PDF

  Page - 35

  but when turn on the laptop, after the hp logo, I see:

  "104 - unsupported wireless network device detected system interrupted - remove the instrument and reboot.

   

  
  I try another device (Intel Wifi Link 1000) and this device work!

  Please hellp

  This is your problem then.

  Here is the link to the service manual for your laptop:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03122685/c03122685.PDF

  The list of wireless cards supported with HP part numbers can be found in Chapter 3, beginning on page 44.

  You must get the module WLAN Intel Centrino Advanced-N6200 802.11 a/b/g/n 2 x 2 with HP part #.

  572509 001.

  Again, you can buy only a wireless card listed in the service manual for your laptop and it must have the part number HP on it or it won't work.

  You can order directly from HP on the link below. You can change your country at the top of the page.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=F13BE835ABCA4E7C851B4DB0F4C74AFC

  Or you might be able to get a card on eBay by searching by part number. Are not looking for the model number that you can end up with a card no HP.

  Paul

• which driver to download for my hp probook 430 g1?

  which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download?

  I have a mediatek mt7630e

  Hello

  Yes, you are right, you said. I'm sorry for the lack.

  I see that there are two versions of the driver that can be used for your card Mediatek and it's the most recent:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5379212 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_122653_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  MediaTek and Ralink companies are now one after their merger.

  Please support me by clicking on the star of congratulations, if you like my post and "Accept as Solution" if my advice were answered or helped your situation. What are the best ways in which you can thank me.

  I am an employee of HP.

• HP probook 4540 s support sata 3

  Hello.

  I want to buy HP ProBook 4540 s and I will replace her with an Sata III SSD HARD drive. So my question is hp probook 4540 s support sata 3 оr no?

  Thanks in advance

  It works. Nice HP

  It's my speed ssd test

  

  My implementation

  

  

• HP Probook s 4525: HP Probook 4525 s memory clock

  Hi guys.

  Recently, I did a upgrade to my Probook 4525 s. I decided to add an another ram 4 GB 1333 MHz PC3 - 10600 module for an existing (Samsung M471B5273CH0-CH9). After I did it I discovered that both modules run together @ 1066 MHz and timings base as if only one module is installed in the system.

  So far, I tried to exchange with others 2 independent modules (a samsung and a SKhynix) where both were 1600 MHz PC3-12800 spec but the system still works @ 1066 MHz.

  The data sheet for Probook s 4525 said it supports 1066 MHz and 1333 MHz. But it never works at 1333 MHz. With the module specd 1333 or 1600 specd.

  Any thoughts on this topic?

  Mine is running CPU AMD Phenom II P960 with AMD HD5470 graphics processor dedicated.

  Hello:

  This link indicates that the processor will only work the memory at 1066 MHz.

  You can install the compatible memory back (1600 or 1333 MHz), but it will only work at 1066 MHz.

  http://www.CPU-world.com/CPUs/K10/AMD-Phenom%20II%20Quad-core%20Mobile%20P960%20-%20HMP960SGR42GM.html

  Memory controller

  The number of controllers: 1 Memory channels: 2 Supported memory: DDR3-1066, DDR3L-1066 Maximum memory bandwidth (GB/s): 17.1

• HP Probook 430 G3 (T6P18ES): technical information Probook 430 G3 m2

  Hello

  I buyed a HP probook laptop computer G3 which comes with storage SSD m2. I would change this module because I need more storage. Can I change the M.2 SSD 256Go module (with 520 MB/s read and 270 MB/s write) in M.2 500 GB SSD module (with 2 200 MB/s read and write of 900 MB/s) or not?

  Thanks for the help!

  Hello

  The limit is SATA III 6.0 GB/s • 555 MB/s approx.

  http://www.crucial.com/USA/en/compatible-upgrade-for//ProBook-430-G3

  Crucial MX200 m2 Type 2280 (Single Sided) SSD 500 GB internal CT7929775

  • 500 GB M.2/NGFF (2280) single-sided internal SSD SATA 6.0 GB/s • 555 MB/sec in reading, 500 MB/s write
  • updated for HP - Compaq ProBook 430 G3 system.

• Computer laptop HP ProBook 4330 s missing from lists, can't get the drivers

  Hi, I have problems with finding drivers for this laptop. When I search on this site, nothing shows and when I find here he only says: "the product you have selected, laptop HP ProBook s 4330, is not supported in...» ».

  I just reinstalled the system and do not have the drivers anywhere. I tried to use the drivers of 4331 s, but there just blue screen of death...

  Thanks for any help.

  The page is now available. Check out the link following, and then click the operating system that lists all the necessary drivers:

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=5045446

• Probook 6460 b does support sata 6 GB/s?

  My SATA III SSD only works with SATA II (3 GB/s) transfer rate in any SATA port (hand, upgrade Bay, E-SATA). Is this a limitation set by HP? Or is there something I can do from the setting in the BIOS (I can't find any more)? Update BIOS F.25

  This topic/request was not answered to the last post and I have no confirmation. Can anyone help?

  http://h30434.www3.HP.com/T5/notebook-hardware/does-ProBook-6460b-support-SATA-6Gbps/m-p/1417315/HIG...

  Product: HP Probook 6460 b

  Chipset: Intel HM65

  BIOS: F.25

  OS: Windows 7 Ultimate 32 bit

  HARD drive: Samsung 830 128 GB SSD SATA III

  http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM65.html

  what it you ssd? or it doesn't matter?

  in this thread

  http://Forum.crucial.com/T5/solid-state-drives-SSD/EliteBook-8560p-crucial-M4-256GB-results-normal/TD-p/89564

  the user can get sata speed with crucial when m4 III restored to f.20

• Installation integrated AMD SATA drivers

  Hello!

  A few days ago I wanted to dual boot Windows 7 with Windows XP. Unfortunately, during the installation of Windows XP, I got a BSoD 0x0000007B. After searching for an answer on the Internet I found this guide.

  According to the instructions, I tried to use 32bit_ATI_SB7xx_RAID & AHCI_driver_v9-4_WHQL and sp43839 SATA drivers. Unfortunately, the link provided for the first driver was broken if I slipstreamed only sp43839 SATA driver. The BSoD appeared again.
  

  Of this guide, I also tried the first AMD SATA AHCI Controller driver. That one did not, either.

  I'm trying to find another SATA driver.

  Additional information:

  Name of product: notebook PC HP 655

  Product number: B0Y40EA #BED

  SATA hardware ID:

  PCI\VEN_1022 & DEV_7804 & SUBSYS_1885103C & REV_00
  PCI\VEN_1022 & DEV_7804 & SUBSYS_1885103C
  PCI\VEN_1022 & DEV_7804 & CC_010601
  PCI\VEN_1022 & DEV_7804 & CC_0106

  Hello:

  I recommend you use the XP of the 4545 sata driver of HP Probook.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113188_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I disassembled the driver file and see the hardware ID for your laptop among the hardware ID's SATA controller supported by the driver in the file of configuration information.

  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4391&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4392&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4393&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4394&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7801&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7802&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7803&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7804&CC_0106

• audio device not connected

  ProBook 4720 s energystar

  It is a problem of repetition. Last year it was resolved after I downloaded a driver who has been recommended by the Committee. He worked for a while then come back to this message. Unfortunately, I don't remember downloading this driver. So, my problem is when I plug my ProBook on TV, I get no sound french the HDMI cable. When I check my output device, I noticed that AMD-output HDMI is not plugged.

  Please help because I like to show things on television.

  Thank you in advance, Caspar

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do http://h30499.www3.hp.com/hpeb/

  HP ProBook 4720 s Notebook PC Support Page

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye

• ProBook 4740 s: driver for unknown device (Probook 4740 s WIN10)

  Hello

  I am updating a Probook s 4740 to 10 windows, but I can't find the driver for an unknown device:

  USB\VID_138A & PID_003D\0030EACE788E

  Can someone help me?

  Hello:

  I would like to try the W8.1 fingerprint sensor driver...

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe

  The above driver has support for the hardware ID you have posted.  I don't know whether or not this will work on W10.

  [Validity.NTamd64]
  % USB\vfs491. DeviceDesc % = USB_Install, USB\VID_138A & PID_003D

  Alternatively, you can try to install the driver manually if auto installation does not work.