HP Prodesk 1 400 mt

Similar Questions

• Prodesk G2 400 LTS: HP Prodesk 400 G2.5 SFF

  Hello

  Our company has recently taken delivery of 400 Prodesk new pc and I'm fighting to change the identification sticker - it is greyed out in the BIOS and can not find where this.

  Someone at - it ideas please?

  see you soon

  Hello:

  On my 8200 Elite CMT, you can change some information like that... to see if it works for your model.

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  You can change/enter the serial number of your PC in the inventory and serial number of the chassis number in application areas.

  Save the changes then and once when you exit the BIOS.

• 400 proDesk G3: any USB-Support - cannot perform a clean Installation

  Hey,.

  here have a Prodesk G3 400 HP and want to install Win7 x 64 ISO from Microsoft.

  ISO of Windows Installation is from the MSDN site. Used the optical drive first-> no Mousesupport USB

  Have created a key USB Flash Drive with Rufus-> burn ISO on USB (Rufus supports UEFI-Images)-> also no USB Support

  Have you contacted Support HP-> get Installtion Windows Recovery Media-> have a usb support but a windows installation 7 modiefied with crap HP bloatware.

  I want to install a NEW Windows INSTALLATION on this workstation only. Is this too much to ask?

  found this entry in this post

  ====================================================================================

  Removal of the USB 2.0 chipset Intel support since the chipset Skylake, so normal DVD and USB Windows 7 install does not work on the 6th generation of Intel chipsets. You must add USB 3.0 drivers in Windows 7 ISO using this utility Intel;
  
  ndows-7-USB-3-0-Creator-Utility https://Downloadcenter.Intel.com/download/25476/Wi

  After running this utility and direct to your Windows 7 ISO, you should be able to install Windows.

  ====================================================================================

  Unfortunately a USB connected also does not work...

  Kind regards

  COTEC

  Hello:

  An illustration of the PC, I see that there are PS/2 keyboard and mouse ports.

  

  You should be able to install W7 if you replace the usb keyboard and mouse PS/2 ones.

  This USB creator utility must also have worked, so I don't know what to say on this subject.

  But the post below my answer which has been marked as being the solution indicates that a PS/2 KB and mouse will also work.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/can-not-install-Windows-7-on-new-elite-desktop-800G2/m-p/5566065/highlight/true#M11888

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• ProDesk 400 MT of G1: New MOBO - invalid chassis serial number and no activation

  ProDesk 400 G 1 MT

  Windows 8 was the orignal operating system

  Recently updated for Windows 10

  Question: Replaced mobo moose that crashed.

  Original HP mobo crashed.  Replaced by superior version 2.0 than the 1.2 that it came with, but same manufacturer.

  Getting two errors:

  1. at boot up -: incorrect serial number of chassis

  2. Windows 10 boots and works very well - did not need to reinstall the o/s - but does not activate Windows 10

  Solutions?  Is there a way to solve this problem without reinstallation?   Something in the BIOS/EUFI requiring an update?

  Thank you

  Darryl

  I hope this helps.

  Desktops HP Business - how to fix a no electronic serial number valid in the BIOS

  Product key Windows 10 is connected to the motherboard, you must contact Microsoft Activation Support @ (888) 571-2048

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• HP ProDesk 400 G1: Install AMD R9 380 on HP

  Hi, sorry for my bad English

  I have a HP prodesk 400 G1 MT and I have already installed a 750 W POWER supply

  I would like to install a graphics card, AMD R9 380 Nitro, can I use this card?

  Thank you one please help me

  Hello

  There is very little information on the compatibility of the R9 AMD 380 and HP 400 G1 ProDesk.

  You have a fairly new PC so there is a good chance that the AMD R9 380 will work.

  Find out what the return policy is before you buy.

• HP ProDesk 400 MT of G1: Rear size fan

  Anyone happen to know the size of fan to HP G1 ProDesk 400 MT PC?  It is 120 mm?

  Here is a practical guide for you:

  

• Prodesk 400 G1 SFF: 400 Prodesk G1 SFF - update graphics card

  Hello world

  I have an interesting problem that I hope you guys could help me with.

  I have a Prodesk 400 G1 SFF and trying to update the graphics card integrated with a GeForce 210.

  The thing is when I put the card into the slot, and then start the on-board computer and the new

  come into conflict.

  It seems to begin completely on the windows login screen, but the only thing you can see is the slider (when you move
  the mouse) on a black background. When I remove the new card, the computer starts and the screen works fine

  I tried to install the GeForce 210 drivers without the card in the slot, but then I get an error message saying that the
  material is not found and can not continue the installation.

  I tried to insert the new card with windows started (I know, not a good idea) to see if the installation process
  detects the card then, but I got the same message "hardware not found".

  It seems that I'm pretty locked. I can't put the card into the slot, because then the screen does not work and I can't
  install the drivers without the card because it must be inserted in order to ensure that it can be installed.

  You guys have any suggestions on how to solve this problem or someone of you had similar experiences?

  Appreciate the help,

  Fredrik

  You are the very welcome, Fredrik.

  Yes, without the new card installed... First go in the bios, turn on legacy mode and disable secure boot.

  HP video card will not work on any HP PC that comes with the W8 or newer of the factory, unless these BIOS settings are changed.

  Normally the PC won't start not even with those setting enabled and a HP not installed video card.

  Then, after changing these settings (without the new installed card), reboot the PC and go into windows, go to Device Manager, click to expand the category of device display maps, right-click on the Intel HD graphics card, select uninstall and check the box uninstall driver.

  Do not restart requested.  Shut down the PC and install the video card.

  Turn on the PC, hope it works, and then install the drivers.

  If you encounter problems (which I doubt you want) you can always remove the graphics card, clear the CMOS which resets all parameters of the BIOS to default values.

  Then reinstall the Intel graphics drivers.

• Prodesk 400 g1 mt i7 HP: hp pro desktop 400 g1 mt i7

  Hi guyz

  I am trying to install windows Xp on my pc hp 400 prodesk g1 mt, i7, x 4, 500 GB.

  When I boot with the cd, try to install windows xp, stop start windows...

  I change in the bios to IDE graph but still no working windows xp.

  but when I install OS W7 AND W8 is Accept.please help me

  @sebastiao1990

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• HP ProDesk 400 Mini G2: Power loss / recovery

  How can I make the Mini ProDesk of G2 400 HP auto-start after power loss. I don't find this settings in the BIOS.

  @HPAC15

  Have you looked here?

  

  REO

• HP ProDesk 400 MT of G1: Why my G1 to 400 HP product will not register online?

  My NEW HP ProDesk 400 G1MT (product # K1L42UT #ABA) will not register online with HP. On a suggestion to help, I tried to enter the name of the product without the TM and, after unsuccessfully, attempted to enter the number of the product without #ABA, always without success. Whenever the data have been entered, a message "no product" popped up.

  HP technical support cannot provide a reason for my inability to register the product, but uses the same information and found my product in its system.  Suppport: HP's is not allowed to register for my PC.

  So I have a problem, it will be very difficult to get online assistance!

  Martin, welcome to the forum.

  I asked a representative from HP to help you with your problem.  You should hear from someone soon.

• MT G1 400 proDesk (Midtower): (need help) graphics card upgrade

  I'm looking to improve my 4600 ProDesk of Intel to a Nvidia GTX 970 graphics.  I understand that this will also necessitate upgrading the PSU aswell, I was thinking of a 650-700 watts model.

  Here is a link to all the specifications of the desktop computer (make sure you use the MT or Midtower model because it shows a model SFF aswell).

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04405864

  Basic PC specs

  • Intel i5 4690 S
  • 2 x 4 G of RAM
  • Toshiba DTO1ACA100 1 TB hard drive
  • Motherboard can be seen in the above link

  My concerns

  • 970 simply does not
  • Power supply may damage the motherboard or the CPU (Intel i5 4690 S)
  • How overide and graphics (Intel 4600)
  • What model of GPU and PSU to consider

  I thank you very much for helping me I am pretty new to the PC construction or upgrade of processes and advice would be fantastic.

  Hello

  Your computer uses a standard ATX (PSU) power.  Open the PC and measure the size of the PSU.  Over 300 watts ATX HP power supplies should be 5.9 "by 3.4" 5.5 "then seek a replacement with the same measures.  Your PC is open, measure to see how much space you have a graphics card.  Study the posted article.

  Corsair CS650m or CX600 would be a good choice for a power supply.

  This EVGA GTX 970would be a good choice for a graphics card, but measure to make sure it fits.

• ProDesk 400 MT of G1: Problems after the replaced the motherboard

  My motherboard was replaced under warranty and reinstalled OS. so needless to say I'll have to reinstall many things.  How to find the name of the network card?  There is no name that appears in the Manager of devices or any other place that I have watched.  On the inside of the computer, there are just a number: DC4A3E442418.  I need the driver.

  I found one driver on driver recovery DVD.  This PC back together after a new motherboard and reinstalling the operating system is worse that my experience reformat a PC.

  Thank you, Kay

• Prodesk 400 G2 microtour: Prodesk 400 G2 microtour - after updating to the latest bios has received 512 - rear fan error

  Hello

  The same situation on three computers WITHOUT fan back.

  After bios update latest version (02.46 Rev.A) I am reciving on each 512-rear chassis error not detected start fan.

  So the problem is definitely with the bios, that someone has the same problem?

  OK, it seems that HP solutions. The problem was with the wrong bios file (version 2.46). First HP remove version 2.46 site Web and today I saw the new version of 2.47. In this case, HP automatically closed my ticket guarantee. Everything is ok with the new file.

• HP ProDesk 400 G1: Error updating Intel Graphics HD 4600

  First Post. Hello, all.  For the last 5 days at the stop, I received, update 1, 1 to ensure that up-to-date driver "driver Intel Corporation update for Intel HD 4600 graphics card". It doesn't have every day. I did not notice problems during normal daily operation.  It is only to stop the 1, 1 update is attempted. I have not tried a manual request for a download assuming that it generates the same result. I have not updated to Windows 10 and have disabled the attempts to do so. Any suggestion is appreciated.

  @Photon713, welcome to the forum.

  I had this same problem recently with Win 10.  I have just go into Windows Update and remove the update.  He'll be back sooner or later and install, but in the meantime I don't get a request to install it.  This could give a try to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.