HP Proliant Server installation issues

Hello!

I am trying to install Windows server 2008 R2 on HP Proliant Gen8 320e server but the configuration says it couldn't find my HARD drive so that, POST he passed as OK and him are still lit throughout the process.

What could be the problem and fix it, please?

Thank you!

Hello:

You can also ask your question on the Business - Proliant servers HP Support Forum.

http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.UtP_hel3u9I

Tags: HP Desktops

Similar Questions

  • ACS server installation issues

    I have a client of the remote site that is replacing their ACS servers and several questions:

    (1) what version we should be installed?

    (2) where we can get a clean binary installer (or do you start with 3.x or 4.0 & upgrade-if upgrade, use us the latest hotfix installer, or do we apply successive patches?)

    (3) replication between versions? Current servers have version 4.1 (1) build 23 Patch 5-do these need to be upgraded to the current version, or can move us later & replicate current?

    (4) is it possible to use different DNS (ex rtpacs.corpnet2.com) name for the site of 'real' server name (e.g. us2sawn00232.us1auth.xxxx.com)?

    (5) how to use GSK signed cert? Have previously tried & failed - something special here?

    Thanks for any help you can give.

    RO

    I have a remote site customer that is in the process of replacing their ACS servers,and have several questions:

    1) What version should we be installing?

    2) Where can we get a clean binary installer (or do we have to start with 3.x or 4.0 & upgrade-if upgrade, can we use latest patch installer, or do we have   to apply successive patches?)

    3) Cross-version replication? Current servers have Release 4.1(1) Build 23 Patch 5-do these need to be upgraded to current version, or can we install latest & replicate from current?

    4) Is it possible to use different DNS name (ex rtpacs.corpnet2.com) for website than server's 'real' name (ex. us2sawn00232.us1auth.xxxx.com)?

    5) How to use GSK-signed cert? Have tried previously & failed-anything special here?

    Thanks for any help you can give.

    RO

    Hi Richard,

    For your queries for replication ACS should be the same version, only then you can replicate between the ACS patner, if you have the same version, so your first and third query got the answer.

    For your fourth query, you can use the DNS server to host your web servers as when the user access the traffic of your web site will land in your DNS server where it will redirect to the origin server so that the DNS server should be authority server for your Web site.

    For a binary installation clear I would say check out this link http://openacs.org/forums/message-view?message_id=1245671 I hope this helps.

    So useful note valauable post.

    Concerning

    Ganesh.H

  • View Security Server installation issue 5.2

    I try to get my security server upward and running for 2 days now and continues to run into a brick wall.  I always get the following error:

    Error 28083.  Failed installation of IPsec. Please see the C:\users\...\...\vminst.log file for more details.  The journal reveals 'error: could not get a satisfactory response from the connection to the server after the installation of IPsec "

    In an effort to solve the problem, I welcomed the Windows Firewall on the Security Server and the connection to the server to allow all incoming connections.

    I checked that all the Back-End firewall configurations are correct and functioning as required.

    I scrolls http://communities.vmware.com/thread/405121?start=15 & tstart = 0 and made the changes recommended in this thread.

    When I remove completely all GPOS from the connection to the server, then I can successfully create the pairing between the server security and the connection to the server.

    Most of the people looks like it's a start for GPO setting to walk through them.  Well, I have several GPO that is applied in order to be compliant STIG.

    What I'm looking for is, can someone please point me in the right direction as to what the parameters might affect IPsec communication between the 2 boxes?

    Thanks for the help.

    After calling and by opening a ticket with VMware, it seems that I was able to successfully install the Security server.  After they looked through different GPO settings several that have been applied, I changed the setting below and has been able to correctly install after you run gpupdate/force on my login server.

    Options Configuration/policies/Windows Settings / Security Settings / Local Policies/Security / Cryptography system system cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing

    My setting has been activated.  I changed it to disabled and it seemed to solve the current problem.

  • How can Cisco ucs c220 m4 I start with 12g cisco sas controller? 2012 UEFI Server installation issues

    first time with cisco ucs c220 m4, check my photos

    You have a VD 11TB.

    Only way to start on this is by using UEFI.

    You need to activate UEFI in the boot order.

    Anything over 2 TB and more 4 K sector size readers require the UEFI boot option.

    BIOS will not process the VDs when manages UEFI.

    Kirk...

    Summary for those who seek a similar question:

    • Client a large VD created, 11TB
    • 2 TB and more, 4K sector drives, require boot UEFI + GPT, cannot use the legacy/MBR
    • To set startup to local HD option, that referenced the PCI-E Slot, the raid controller was in (HBA slot in this case)
    • UEFI mode, can't score a VD as "bootable disk / startup.
    • You will see not the VD/raid controller appear in the 'real' boot order during the OS install.
    • Once the installation of the OS compatible UEFI is made, it will create a UEFI boot to the operating system "Windows Boot Manager" entry in our case.
    • After the next reboot, if you check your boot order, you should see this UEFI OS boot manager entry.
  • E.M.P. 11.1.2.2 Installation issue on RHEL6 64-bit

    Hi all

    IAM EMP 11.1.2.2 on RHEL6 64-bit server installation

    When Iam by running the installer, I get the following error

    EPMINS-01072: you have read only access to the inventory of the oracle

    Note: I installed oracle 11 GR 2 (11.2.0.3) on the same server, but its in another directory

    I have explored the issue and found that on the oraInst.loc file permissions should be assigned after even the assignment of permissions still the problem exists.

    Could someone please guide me if they were facing the same error.

    Thanks in advance,

    RAM

    Hi John,.

    Thanks for the reply.

    I tried adding the user installation of Hyperion to oracle group, but it did not work.

    I have him granted the permissions in the oracle root directory and and all of its subfolders, then the problem has been resolved. (app/u00) was the directory where I've provided the permissions and also for all the sub directories as well.

    There were several oraInst.loc files in the directory and giving individual permissions for this file did not resolve the issue.

    Thank you

    Thank you

    RAM,

  • Xcode Server installation failed (ssl configuration infrastructure)

    After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

    The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

    Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

    Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

    And then an error stating:

    Xcode Server installation failed (ssl configuration infrastructure)

    Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

    Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

    Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

    Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

    Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

    20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 10;

    currentPercentageCompleteRangeMinimum = 10;

    currentStep = 'Xcode stop server';

    percentComplete = 10;

    status = running;

    }

    20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

    20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

    (4 / 6) [START] stop nginx daemon

    (3 / 6) Server [START] stop API

    (1 / 6) [START] stop CouchDB

    (6 / 6) [START] stop builder

    (5 / 6) [START] daemon stop control

    (2 / 6) [START] stop repeat

    (5 / 6) [END - 0.05 S] Stop control daemon

    (1 / 6) [END - 0.05 S] Judgment of CouchDB

    (2 / 6) [END - 0.05 S] Stopping repeat

    (3 / 6) [END - 0.05 S] Stop server API

    (4 / 6) [END - 0.14 S] Stop the nginx daemon

    (6 / 6) [END - 0.16 S] Stop generator

    A successful!

    Total time: 0.32 seconds

    20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

    20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

    20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

    20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

    Note : There was a lot of posts like this that I missed:

    20 September 15:50:38 syslogd server [69]: notice of Configuration:

    ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

    These messages may not appear in the standard system log files or in the database of the ASL.

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

    20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 75;

    currentPercentageCompleteRangeMinimum = 20;

    currentStep = "Configuring SSL infrastructure."

    percentComplete = 54;

    status = running;

    }

    20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

    20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

    20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

    20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

    (1/29) [START] make sure Xcode is accessible

    (1/29) [END - 0.20 S] Make sure Xcode is accessible

    Audit (2/29) [START] version of Xcode is supported

    (2/29) [END - 0.00 S] Check if the version of Xcode is supported

    Developer mode (5/29) [START] if necessary activation

    [START] Running (4/29) xcode-selector - /Applications/Xcode.app

    (29/3) [START] check if the server version is supported

    (3/29) [END - 0.02 S] Check if the server version is supported

    Data directories (6/29) [START] creation by default (if they are missing)

    (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

    (7/29) [START] create a symbolic link to the current path of the Xcode application

    Access to the repository (8/29) [START] HTTP configuration

    Integration of control (9/29) [STARTED] preparation

    Access [START] SSH configuration repository (10/29)

    (8/29) [END - 0.12 S] Access to the HTTP repository configuration

    (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

    (10/29) [END - 0.12 S] The access to the repository SSH configuration

    (11/29) [START] establishing the file config for Redis

    (12/29) [START] set up the config for CouchDB file

    (13/29) [START] Setup launchd job system

    (5/29) [END - 0.16 S] Enabling developer mode if necessary

    (9/29) [END - 0.23 S] Preparation of control integrations

    (11/29) [END - 0.16 S] Setting up the config for Redis file

    (12/29) [END - 0.20 S] Setting up the config for CouchDB file

    (13/29) [END - 0.20 S] Launchd jobs system configuration

    Group creation [START] (14/29) for users of service if required

    Saving configuration [START] (16/29)

    (15/29) [START] configuration CouchDB to use all cores

    (14/29) [END - 0.02 S] Creation of service if required users group

    Users of creative services [START] (17/29) if necessary

    (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

    (15/29) [END - 0.08] Configuration of CouchDB to use all cores

    (16/29) [END - 0.33 S] Configuration of the recording

    (17/29) [END - 0.52 S] Creation of users of the service if necessary

    Configuration of SSL infrastructure [START] (18/29)

    (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

    Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    Total time: 4.13 seconds

    The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    20 September 15:50:41 Server servermgr_xcode [867]: response: {}

    error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

    errorCode = "-1";

    errorDomain = ServermgrXcodeErrorDomain;

    errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

    errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    status = 1;

    }

    20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

    20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 75;

    currentPercentageCompleteRangeMinimum = 20;

    currentStep = "FAILED: SSL infrastructure configuration ';

    error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

    errorCode = "-1";

    errorDomain = ServermgrXcodeErrorDomain;

    errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

    errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    percentComplete = 54;

    status = FAILURE;

    }

    This article is interesting:

    20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

    No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

    Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    Help to get the Xcode service backup and race would be much appreciated!

    I had this same problem. I typed in the following in the terminal:

    sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

    After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

  • What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

    What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

    Hello

    Please repost these questions in the Technet Forums

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    See you soon.

  • SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

    How can I fix this error? Thank you.
    SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

    Hi DMarie125,

    The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

    http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

    Hope the helps of information.

  • during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

    during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

    Thank you for visiting the Microsoft answers community.

    The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Database MS SQL Server with AIX server connectivity issues

    Hi all

    I am confronted with the below with the AIX server connectivity issues.

    Operating system: AIX 64 bit

    DB: SQL Server 2005

    EPM Version: Hyperion 11.1.1.4

    Error creating socket to host and port 1433. Reason: Connection timed out: could be due to an invalid address

    Tired of Solution

    (1) checked the properties of TCP/IP, its permitted.

    (2) ping the source and target servers both ends all works fine

    (3) firewall is DISABLED in DB Server

    Hi all

    My apologies, its number of firewall & network. Resolved by the Unix administrator.

    Thank you

  • Mirage Server installation fails: the server failed to register

    Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

    Here is the error I get when you install the Mirage server:

    error1.png

    It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

    error2.png

    As you can see, the version is the same and I have already installed the management server:

    versions.png

    You look at the log of the server installation.

    Install using:

    msiexec /i INSTALLATION_PATH/l * v LOG_FILE

    Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

    Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

    Also, make sure that the user has read permissions to users and computers basic UO in AD.

  • In the face of the question then Server installation SOA to put up BPM11g working environment

    Hi all

    I was able to install the Weblogic Server and database, but I am facing problem in SOA server installation.

    I try to install it to run application 11g BPM.

    I saw the same problem has already been answered, but available solutions are not solve my problem.

    Error message: Specify the location of the JDK/JRE when you launch the installer. Invoking the setup.exe with - jreLoc < JDK/JRE location absolute path > settings.

    I tried both way to initialize the installation. IE directly through setup.exe and command line, but in both cases I get the same error.

    He don't ask for path to Java command-line also.

    (a) in my java 7 system is installed.

    (b) I used Oracle Database 11 g instead of XE

    This could be the reason?

    I checked the program files:

    jre7 and jdk1.7.0_45 are here.

    I also set JAVA_HOME in the C:\Program Files\java\jre7 environment variable

    path: C:\Program Files\java\jdk1.7.0_45\bin

    Please help me to solve this because I'm stuck in this facility in recent days.

    Thank you!

    Try running the setup in the disk1/install/win(32/64) folder and then provide the path to the jdk "C:\Program Files\java\jdk1.7.0_45"

    Kind regards

    Anshul

  • New Mobile Server installation

    We have set up a sandbox test for Mobile Server.  We have completed the following.

    Server installation:

    1 Installing Glassfish

    2. install the Mobile Server

    We can connect you to the Mobile Server and the services are running

    Customer

    1. download sqlite and compiled through MinGW

    2. from customer customer consulted and downloaded files for sqlite win 32 platform

    3. in the course of execution msync we get a successful communication.  Registration of the device I get

    Lack of information to go forward

    Error code: invalid platform: the thread is already in background processing mode.

    Hi Bob,

    You must run setup.exe to install the client with the Admin rights on the Windows platform.

    Thank you

    Oracle Database Server Mobile Development

    Winnie.Hu at oracle dot com

  • Linux HQ Server installation error

    Hey everybody,

    I installed on my RHEL 4 HQ server and the Agent.  The agent installs fine, but when it goes to the server installation I get this error.

    Someone has seen this before or have any ideas what may be the cause of this?

    Installation of the server...
    Unpacking of server to: / home/admin/hyperic...
    Creation of server configuration files...
    Copying the binaries and libraries of the server installation...
    Copy the configuration of server file...
    Copying files db setting at the server level...
    Copy of the libs of server...
    Setting up database server...
    Loading taskdefs...
    Responsible Taskdefs
    --------------------------------------------------------------------------------
    An ERROR has occurred, the installation cannot continue.

    /Home/admin/hyperic-hq-installer-4.5.2/installer/data/setup.xml:493 error: the following error occurred during the execution of this line:
    /Home/admin/Hyperic-HQ-Installer-4.5.2/installer/data/Setup.XML:502: the following error occurred during the execution of this line:
    /Home/admin/Hyperic-HQ-Installer-4.5.2/installer/data/Setup.XML:683: the following error occurred during the execution of this line:
    / home/admin/hyperic-hq-installer-4.5.2/installer/data/setup-db-MySQL.xml:10: the following error occurred during the execution of this line:
    / home/admin/hyperic-hq-installer-4.5.2/installer/data/setup-db-common.xml:151: /home/admin/hyperic-hq-installer-4.5.2/installer/data/tmp directory creation was not successful for a reason

    -Danny

    If you are with the user account 'hyperic' insalling then you must provide all permissions to the installation directory.

    Here is the command for permission problem "/home/admin/hyperic-hq-installer-4.5.2/ chown-r hyperic.

    Let me know if this helps.

  • the installer issues

    Why can't I install cs6? He repeats the installer issues.

    Hi treunltd3

    What is the error you get?

    You can view the document below and see if that helps.

    http://helpx.Adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

Maybe you are looking for