HP psc 1210v will not print photographs

Similar Questions

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• HP PSC 1600 will not print.

  I have a HP PSC 1600 all in one. Operating system is Mac OS x 10.6.8. (laptop)

  I get a message that says that the printer has "no mech mode" & failure of Communication: the computer is therefore more able to communicate with your printer. "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.  Also says: "the printer offline. A break. "Can't seem to reset this mode in the printer preference box. I know the printer is old, but it has been working great until now.

  He scans the computer and sends an e-mail message. I unplugged several times & reset the default value of the button "setup" printers.

  Ink cartridges carriage does not move when I plug the printer in and printer. Generally the transport when I turn on the printer, sounds like it moves back & fourth. But not now. Did not have any 'new' things installed.

  Thanks for any help! or97355

  Take a look at this linkfor help.

• HP psc 750 color, which has been filled, cartridge will not print.

  HP psc 750 color, which has been filled, cartridge will not print.  Using Windows Vista.  Get the message "check color cartridge".  Only change to the system was making filled the color cartridge.

  Performing the procedure online electrical contacts cleaning service twice without a bit of luck.

  Looking for suggestions as to how to solve.

  Hello. Since the hard reset is not; I would try a new cartridge at this point. The hard reset is one of the most powerful tools when it comes to correcting hardware related problems and error messages.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• Whenever I want to print, it prints the test of the colors before it will not print what I want

  Whenever I want to print it prints the test of the colors before it will not print anything.  How to stop?  It is a gigantic waste of time and my color ink!  Thank you.

  PSC 1510 manual is online here, 47 page has information on the alignment process.

  If your problem is resolved, click on "Accept as solution" button o the appropriate response.  This will help others to solve similar problems.

• New Photosmart 5520 will not print in black

  I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

  edgarlogcabin wrote:
  

  my printer hp 5520 will not print black

  The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

• My HP Officejet 4500 printer all-in-one will not print web pages

  My new printer will not print anything when I try to print selections as a route on a web page of travel.
  Other features of the printer works k o such as print emails.
  I have Windows 7 Professional 64 bit system.

  "My new printer. »

  For a newly installed printer, you may need to reset some hidden preferences, print.print_printer, in particular, for Firefox to recognize the new printer.

  • See-> http://kb.mozillazine.org/Problems_printing_web_pages (see "Reset printer")
  • See-> http://kb.mozillazine.org/About:config

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• HP4480: will not print in black

  I have recently upgraded to the version of windows in 10 home edition 1511.  I have a HP4480 that is compatible with windows 10.  It is updated with the correct drivers.

  My printer will be printed in black and white if I copy a document on the printer, HOWEVER it will not print in black and white if I print a document on my laptop or from a Web page.  I'm also using Microsoft Edge.

  I run Scan Doctor, clean my print heads, made sure everything is aligned, but can not determine why I can not print in black and white the computer laptop but can from the printer.

  The diagnostic message only I received is "peripheral composite USB does not work with USB 3.0' I have no idea what this means and don't think that I have the choice for the ports on my Inspiron 15R laptop 5520.»

  I've also posted on the Microsoft forums but really need to get the printer works with the operating system and cannot afford to buy a new printer just because I upgraded.

  Any help is appreciated.

  Thank you.

  Janet

  I solved the problem.  For some reason, my real print HP 60 cartridge was the question.   Almost empty, I left forward without problem.  Once I replaced the cartridge, all now print correctly in black and white.

• Office Jet Pro 8500 black ink cartridge will not print

  black ink does not print and alignment fails.  I cleaned the printheads through all the levels.  The colors print perfectly but black will not print.  I have reset the printer, run test pages, but still no black ink and unity trys to align, but fails.  The unit is no longer in warranty.

  Hi mariajw,

  Thank you for your answer!

  What I would recommend to do at the moment is to please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Best regards!

• DesignJet T770: DesignJet T770 will not print in color

  After you move a DesignJet T770 44 inch queue from a Windows 2003 server to a Server Windows 2012 R2 the T770 will not print in color.

  The general tab on the properties T770 printer States ' color: No. '.  Yet once on the printer properties on the tab color color management is set to "Automatic (recommended)".

  The T770 printer driver has been downloaded from Windows Update I was unable to get a T770 driver from the HP website.

  The T770 product no is CH539A / CN375A. Strangely, none of these product numbers have been recognized by the search for product number for th HP Web site.

  My question is how do the T770 to print color again?

  Any help would be appreciated.

  I would say that you definitely have a driver problem if you has not changed the settings in the built-in web server printer at the time wherever you spent since Windows Server to the other server in Windows.
  
  I check all the settings on each tab in the driver to see if it is possible that somewhere in there color is disabled.
  
  I also go back to HP.com and look for driver for that machine again.
  
  I am also looking for a print utility for this machine, which should not be confused with a printer utility, even if they might be named roughly the same.
  
  I recall there are two utilities is to monitor the status of your printer, and the other is to print and work around the driver.
  
  When you have found the right print utility you save your print format JPEG or PDF file and then open it in the print utility and send it to the printer without ever open drivers.
  
  Another experiment, you can try it if you have a practical PDF just open a web browser and access the built-in web server printer and then try to print the PDF file directly by using the option for printing on the web server.
  
  The purpose of some of these things is number one determine if the printer has developed a problem that it prevents printing color and print JPEG or PDF from the built-in Web server where all you do is send the file directly to the printer would let you know that the printer is always able to color.
  
  So if you can get the print work utility where you can open the PDF on a PC and then send it to the printer you have to least a workaround while you solve the driver problem.
  
  If my post solves your problem, please click on the accepted solution button under the post. Thank a technician for their efforts in the creation of these posts please to give them a little nudge upwards, just click this icon under the post and give them a few congratulations.

• My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

  My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

  Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

• I tried to buy my book - DEFAULT TEXT - your book seems to have default text that has not been modified. Printed books will not include this text. This means all my text will not print?

  Using OSX El captain on a desktop iMac. iPhoto 9.6.1

  I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?

  I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?

  Thank you Davina

  It is not a problem of fonts. It is the problem of the sample text entered by the models.

  The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.

  If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.

  For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend:

  

• My 5610 will not print Calibri can anyone help

  My HP 5610 printer will not print Calibri can anyone help

  Hello

  My printer and my tongue do not like this policy. My simple solution: use a different font. Even some applications do not use/like this font. I don't know why MS puts it in Office by default, and users will have to change.

  Kind regards.

• Photosmart C & 180 will not print red

  The printer has suffered when we had a power cut and he was turned on.

  Since then, it will not print red. (I just get yellow).

  Have looked through the wire "Will not print Magenta", I'm not sure who, magenta cartridges (or both), I need to try hard - or if there are a few other adjustments that I do.

  Hello Phil1812,

  Please confirm the process you have already finished.

  Another process, you could try is as follows:

  (1) remove all ink cartridges.

  (2) close the ink access door.

  (3) disconnect the printer.

  (4) wait for about 30 seconds.

  (5) connect the printer.

  (6) a message indicating to load the cartridges should appear on the control panel.

  (7) reload cartridges.

  Kind regards

  Lynn_B