HP psc 1219 all-in-one will not print. Work queue says "error".

Similar Questions

• 6500 all in One - will not print in black, no error message

  Twice now, I sent a cartridge black staple, thinking that there was something wrong with it because the printer would print fine for the first copies of 20-40, then stops.  When it happened a third time, I started thinking maybe this isn't the ink cartridges.  Just the printer does not print in black.  Can I change the font color of blue and all is well.  When I try to print something from black, the printer ACTS like it was printing but nothing comes up except the color elements.  The diagnostics show no problem, that the printer has no error message, even shows the full ink cartridge (which is)... but it just will not print in black.

  Try to soak the printhead as described in this post.

• HP psc 1205 all-in-one, will not print copy.

  my printer is connected to my computer, normally when I want to make a copy (ie) using the upper part of the printer, I had no problem but now it does everything it is supposed to do, but does not print, (ie) no copy ink cartridge is full. I can print from the computer.

  Hi @sammymax

  I had totally misunderstood, thanks for the clarification.  Since you can print from the computer, but not copying correctly, I suspect that the issue could be the lamp in the scanner. We will perform a hard reset. To do this, leave the printer and disconnect the power supply for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  If the problem persists, please call us. We can get you a discount on a newer model. If you are in the Canada or call 800-474-6836, or you can Contact HP worldwide.

  I hope this helps.

• My "hp psc 1215 all-in-one" will not print.

  Windows Vista 32-bit,

  I can't print from my Dell laptop inspiron 1721.  There're are equipped with two new b/w & color cartridges.  The print queue will not let me delete when status says it is printing, but ' nt print.  The printer works when it is directly from the printer & scans of the printer to the laptop.  How can I solve this problem?

  Error 0 x is a generalized ink system failure message. There are a number of reasons that would entail. I would have pasted the instructions in my post, but this document is pretty length the nature of the error.

  http://support.HP.com/us-en/document/c03081973

  Work there to try to resolve the 0 x... error, you receive. Let me know if this or does not resolve the problem.

  Good luck

  Sean

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• HP psc 2115 all in one color not printing on Mac

  Hello

  I have a MacBook Pro, OSX 10.9.4. It prints very well on my HP psc 2115 all-in-one in black and white, but not color. I tried to find an update for the driver here, but nothing helps. Is it just that the printer is not compatible with my operating system, or is there something more I need to do?

  Thank you very much

  We gladly invite you.

  Try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + left click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Once you have finished, click on the sign more and select the PSC 2115 list.

  Click on the drop down menu, then make sure the HP PSC 2110 is selected.

  Please let me know the results,

  Shlomi

• How do you re - align a printer HP PSC 1400 all-in-one is not printing?

  Could someone show me please how to realign a printer HP PSC 1400 all-in-one not print after paper jam could only be released, with difficulty, from the front of the tray of the printer. Thank you.

  Hello

  You can do a hard reset with the printer. Be sure and remove the ink cartridge before unplugging the power cord. This will ensure that the cartridges to realign itself when they are inserted in the after that the printer invites you to do so.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• Printer HP 6210 all in one will not print computer

  My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop that did not have Vista. However, as soon as I have my Phoenicia connected, which has Vista, it will not print. My computer doesn't work anymore so I need to use hers. What can I do to make it work? Thank you

  Beeky27

  Hi @Beeky27,

  Welcome to the HP Forums!

  I noticed that your HP Officejet 6210 won't print from your Windows Vista computer. I am pleased to see that for you!

  First of all, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP full feature software and drivers. Then I would run the HP print and Scan Doctor, to ensure that everything works.

  Let's start with these steps and go from there!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• C7280 all-in-One will not print envelopes

  The printer tells me the envelopes are the right size and will not print.  I use Windows 7.  I put in all the exact measurements for the envelope in both software (Word 2007 or Hallmark Cards), then in the window HP I set the size, but it will print only on paper in full format, not the envelope.  Is it possible to substitute the rejection of the printer of the envelope?

  Check the paper type: in the C7280 printing preferences/options is set to plain paper.

• My HP Officejet 4500 printer all-in-one will not print web pages

  My new printer will not print anything when I try to print selections as a route on a web page of travel.
  Other features of the printer works k o such as print emails.
  I have Windows 7 Professional 64 bit system.

  "My new printer. »

  For a newly installed printer, you may need to reset some hidden preferences, print.print_printer, in particular, for Firefox to recognize the new printer.

  • See-> http://kb.mozillazine.org/Problems_printing_web_pages (see "Reset printer")
  • See-> http://kb.mozillazine.org/About:config

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox