HP PSC 1315 all-in-one printer

Everytime I turn on my printer it prints a test page.  How can I stop doing this and waste?

HI - follow the steps in this post:

http://h30434.www3.HP.com/T5/other-printing-questions/PSC-1315-how-to-stop-test-page/m-p/136906#M8915

Probably what you see is an alignment page.  This message will provide details to solve the problem.

Hope that helps.

Tags: HP Printers

Similar Questions

  • hp psc 1315 all-in-one printer has a memory/hard disk?

    I want to have a printer all-in-one hp psc 1315. is there a hard drive than the personal information?

    Hello

    With a few exceptions, most of the printers have not memory to hold the print jobs (which are not cleared by simply turning off the printer).  The only thing that can be stored in some printers (with fax capacity) is telephone numbers in the fax log.  I don't think that the PSC 1315 has a fax, but if you really want, you can do a hard reset I think that you can unplug the printer from its power source and by holding the power and Cancel buttons down.  You may see a flashing of the lights. That should do it!

  • Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

    .. .or is not possible, and it is best to think about to buy a new printer!

    I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

    My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

    Thanks in advance ;-)

    Peter

    IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

    Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

    Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

  • PSC 1315 all-in-one: paper jam

    My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

    Thank you

    Oldfud

    Hi @oldfud

    Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

    It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • power cord for hp psc 1315 all-in-one

    where can I find a power cord for my printer. I have a hp psc 1315 all-in-one

    Search you the Web?

    https://search.Yahoo.com/search?EI=UTF-8&FR=ytff1-GL-Gen1&p=HP%20psc%201315%20Power%20cord&type=

  • 1315 all in one printer

    I have a 1315 all in one printer and since I changed the black cartridge it prints a test page everytime I turn on the printer.  Because I don't use it much, it generally remains offshore.

    I downloaded the updated software, but he always does.  What is the solution?

    Thank you, [email protected]

    Thank you.  It seems to be cleared up now.

    I really appreciate it.

    Ernest Smith

  • HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

    I get the following installation error when you try to install the HP PSC 1315 all in one.

    [code 1632. The Temp folder is on a drive that is full or inaccessible.

    Free space on the drive or verify that you have permission write to the Temp folder.]

    Hi @tasos251,

    I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
    4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. Open the folder Util
    7. The CCC folder
    8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
    9. Once the uninstall is complete, reboot the computer
    10. Follow these steps to reset the registry settings and options for Windows Installer.

  • 1315 all in one printer: my 1315 all in one printer shows "paper jam".

    My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

    Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

  • Windows RT and HP PSC 1510 all-in-One printer connection

    Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

    Hello

    I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

    http://support.HP.com/us-en/document/c03168175

    Kind regards

    Shlomi

  • HP psc 1210 all-in-one printer: HP PC all-in-one printer

    Printing test page fine.  Prints the first page of the document very well.  After than that, each page becomes lighter and blurred until unreadable.  This "bad s.  Printer is several years old and has been the impression so far.

    Hello @bdr777,

    Welcome to the HP community!

    I hope you have a pleasant experience here.

    I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.

    Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.

    Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).

    If copies are still faded and blurred, try these steps to clean the cartridges:

    1. Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
    2. Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
    3. To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
    4. While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
    5. Reinsert the ink cartridges and perform the alignment of ink cartridges.
    6. Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.

    -Source

    If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.

    I hope this helps!

    Please reply to let me know if we have solved the problem.

  • HP PSC 1510 all-in-one printer

    My OS is Windows 7.

    I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

    Hello

    Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

    Follow the steps for troubleshooting instructions.

    (1) how you try install the printer?

    (2) using a CD/DVD to install the printer?

    Follow the steps for troubleshooting instructions.

    Method 1:

    I suggest you to refer to a link.

    Diagnose and automatically fix problems printing and printer.

    http://support.Microsoft.com/mats/printing_problems/

    Method 2:

    I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

    HP PSC 1510 All - in - One Printer Drivers & Downloads.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

    If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

    Thank you.

  • HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

    Hello

    HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

    Now what can I do to get this printer to work?

    I solved this by using Windows update, which then installed a driver in the end.

    This was not a great experience.

    Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

    Not good PR client on any level.

  • Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

    Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

    My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

    Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

    I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

    I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

    I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

    Thanks in advance for all who are able to provide me with assistance.

    Thank you

    Alison Black.

    LIVE FAST, FIGHT HARD CLOSE.
    HUSTLE, LOYALTY, RESPECT

    John Cena (WWE Wrestling Heavyweight Champion)

    Hey

    HP have the customer.

    has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

    but fisgured this is a setting of the printer.

    so if you have the HP SOLUTIONS CENTER's new installed.

    down the down theres a SETTINGS tab click on it.

    go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

    the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

    Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

  • PSC 1610 all-in-one printer: PSC 1610 will not print

    HP PSC 1610 all-in-one

    No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

    Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

  • I have a problem with the HP psc 2210 all in one printer.

    My printer is an hp psc 2210 all-in-one

    All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

    Hello

    Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

    http://WWW8.HP.com/us/en/support-drivers.html

    Or ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/PSG/

    See you soon.

Maybe you are looking for

  • Re: Satellite P200 (PSPB6E) - keyboard problem

    Hello I have a keyboard with Satellite P200, series PSPB6E problem. Keyboard seems to generate Press Page Down constantly, although nothing has been paid to this subject.It is even difficult to turn on laptop, because it produced consecutive beeps an

  • HP Pavilion DV8T-1200: HP Quick Launch buttons going haywire... Anyway... in 2016

    There is just a follow-up of all posts of 2010 and 2011, I have still a dv8t-1200 and I scoured the internet for a way to disable completely the keys to quick launch on my dv8t as static or whatever it is driving me crazy, and I will just buy a wirel

  • Shut down the computer to randomly pop poster

    The "stop the computer" seeing pop randomly on my XP Pro PC.  When it appears, the office begins to fade in black and white, as is the case when you deliberately cut the computer by using the command 'Start '.  All this seems to start when the follow

  • limit switches will not turn off

    We use PXI NI Motion Assistant 1031 and measuring and Automation Explorer. Our limit switches always read assets, and when we enter the Configuration of the axis to try to change things, something creates a loop of update that prevents us from changi

  • WRT54GH how to check any user

    as above. 1 time use cisco router.Where a list of the user connect to the router? Thank you.