HP PSC 1315 all-in-One use scanner without ink cartridges

Similar Questions

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• power cord for hp psc 1315 all-in-one

  where can I find a power cord for my printer. I have a hp psc 1315 all-in-one

  Search you the Web?

  https://search.Yahoo.com/search?EI=UTF-8&FR=ytff1-GL-Gen1&p=HP%20psc%201315%20Power%20cord&type=

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• PSC 2355 All In One - used to scan

  I had to uninstall and reinstall my PSC 2355 All In One Printer because the scanner was not working. I downloaded the 'simple' version and the printer is fine, but I cannot scan stall. Should I uninstall again and download the 'full' version' - who would do it or not? I know that I can open Paint and scan from there, but I'd rather work on the printer itself - someone help? Thank you very much in advance.

  With the simple version just the scandriver is installed, so you will need a party 3thrd like a paint program to scan. To have the features you want, install the full software of features indeed.

• HP psc 1315 all-in-one driver download problem?

  Hello..

  I tried for 2 days to download the driver HP 1315 all in one for windows 7 (64-bit)... downloading begins... a full 99%... and he tells me there's one second left... and then it stops the download... in other words... the download never reaches 100%! .. and I can't use it... I was wondering if it is possible to get another link?

  Where are you located?  I just downloaded the file 300 + MB from the link here.  If this fails, you can try this link (ditto, but http:// instead of ftp: / /).

• What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

  I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

  Hey Fed-Up-with-HP,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

• PSC 1315 all-in-one can be used as a fax machine?

  I thought I had faxed before 1315, ha ve in hook new computer and now it seems that I can't send fax, it is even possible to use while a psc 1315 as a fax?

  Well, no, it isn't. You can see the specs here PSC 1315 specifications. If you had faxed to her, you would have a phone line connected on it.  Maybe you tried an e - fax service and the printer to scan the document.

• HP PSC 2410 all-in-One - use in 64-bit environment of Windows 7

  Hello

  I've had this all-in-one HP PSC 2410 printer for a few years now and it has worked quite smoothly in an environment Windows XP Pro SP3 for the time.

  A few months ago, I bought a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and I installed the printer successfully and it works, the software suite provided with the printer on the CD will not install for this environment and so I have more access to the different Maintenance Options that were available in Windows XP Pro OS such as cleaning and fax options.

  Looking for something for Windows 7 64-bit operating system threw up two options - update driver and utilities Assistant tool.   After getting off the route to update the driver, no software suite was available, and in fact the update said that the driver has been installed by Windows 7 automatically.  This seems to be the case as the printer works very well in print mode, mode of scanning (in the desktop menu) and it detects SD cards in the slots.

  However, there is no software to allow me to fax or clean or do any of the other options available in the HP Suite provided on the CD.

  Down the utility road has downloaded me a file - HPPIW. EXE - look at my current installation of the printer and check with HP for updates.   After several attempts, the utility simply CANNOT find my printer even if it is installed, running and even windows sees!   No amount of recycling the POWER button or restarting the computer allows this utility to detect the printer at all.  It is installed via USB on PC family of 64-bit Windows 7 and windows updates current are always fully updated.

  I considering buying a new HP OfficeJet 8600 Pro Plus to use as printer family with Windows 7 system - and move this HP PSC 2410 upstairs to connect directly to my Office Windows XP Pro SP3 staff and use the original CD to install it.  My Canon IP4200 Pixma just die on my own PC, on the floor.

  However, until that I do this, are there any available software suite that could work in the environment of Windows 7 that would allow me to use the various functions such as fax and cleaning that were available under the old XP environment and gets through the CD?  As a result of software never updated for Windows 7?

  Thank you

  Lee James

  The UK West Sussex

  Hi BAW9DV,

  I can't wait to hear that you have questions.  While there isn't a utility software that will complete the desired tasks, maintenance can be completed from the front of the unit.  Windows also has a request for the fax from the computer so that may work with this device. See the information below which can activate the functions you want.

  Sending faxes:

  1 fax and scan Windows use

  A. Type Windows Fax and Scan in the search box

  B. set up Fax for use.  Click here to see the Microsoft documentation for usage.  Note: This is a 3rd party Web site. HP and I are not responsible for the content of this site.

  C. Select New Fax

  Front panel maintenance tasks:

  Running the print cartridges clean utility click here

  Setf-test page click here print

  Evaluate the test page click here

  Align the cartridges: press Setup, press 5, then press 2

  If you work around options are not acceptable the 8600 model would certainly meet your needs in comparison with this camera.  However, I encourage you to contact HP to see what upgrade options are available for this device. It will probably be another Photosmart design unit, but in many cases, upgrades are available at a discount to our valuable clients guaranteed.  Global coordinates can be found here.

  PS If you pass through technical support, remember to ask questions on packs.  Extended warranties may also be available at a reduced rate for the upgrade.

  I hope this helps!

• hp psc 1315 all-in-one printer has a memory/hard disk?

  I want to have a printer all-in-one hp psc 1315. is there a hard drive than the personal information?

  Hello

  With a few exceptions, most of the printers have not memory to hold the print jobs (which are not cleared by simply turning off the printer).  The only thing that can be stored in some printers (with fax capacity) is telephone numbers in the fax log.  I don't think that the PSC 1315 has a fax, but if you really want, you can do a hard reset I think that you can unplug the printer from its power source and by holding the power and Cancel buttons down.  You may see a flashing of the lights. That should do it!

• 4315xi-HP all-in-one: use scanner 4315xi hp Windows vista operating system

  I just upgraded my desktop computer Dell 5100 from XP to Vista Ultimate and found the drivers for the print side and it works. Can't get scanner with Vista.  Roger Black

  Hello @rblacj ,

  Welcome to the HP forum.

  I understand that you have problems of analysis after the upgrade to windows vista.

  I want to help you.

  Something must not have installed correctly.

  Try to run the HP print and Scan Doctor.

  I also noticed that two updates, you have those installed?

  HP Officejet 4315xi all-in-One printer - software & drivers

  Please let me know if you need more assistance.

• HP psc 1315 all-in-one will not scan

  My all-in-one HP 1315 machine is more scanning documents. It copies and prints without any problem, but I can't scan. After I have put a document on the glass and press the "Scan" button, the "On" flashes several times and then the machine makes a short noise and then nothing. Can anyone help to troubleshoot the problem please?

  Jamieson, goodnews. Myallinoneprinternowscansagain.Ithinktheproblemwasthatthesoftwarehadbecomecorrupted.SoIuninstalleditandreinstalleditandthatseemstohavedonethetrick.Thanksforyourhelp.SJAEFF

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi