HP PSC 1315 scanning painfully slow with HP 13.1 on Windows 7 Solution Center

Similar Questions

• printers HP psc 1315 does not work with windows 7

  BOTTOM of my son recently gave me an Acer computer

  PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

  Hello

  ·         What happens when you try to print?

  ·         What is the code or an exact error message you get?

  ·         What operating system is installed on the computer?

  Method 1:

  Run the fixit provided in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  I suggest that you install the latest driver for the printer and check if that helps:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

  Method 3:

  You can also uninstall the printer and then install and as a default and check if it solves the problem:

  Add or remove a printer

  Change your default printer

  Method 4:

  You can also check out the link below, because it addresses similar issues:

  http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

• parsing with HP printer error cannot access the solutions Center

  I can't access HP solution center anymore, I get a message "ERROR PARSING in digital imaging bin hpqscloc 1033

  I tried, I couldn't Uninstall HP totally yhank you for help

  You will probably need to uninstall all HP software via Add/Remove with your disconnected printer, then restart, before installing the software on HP site and only connect the printer when installing telling you.

  HP have also a tool on their site to completely remove the remove failure cases of

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• HP Photosmart 2510 PSC and Windows 7 Solution Center does not

  I have just updated my OS to Vista Business Professional for Windws 7 Ultimate and now device not found when I try to use the center of Soluton HP. My device is a PSC Photosmart 2510 All in One andconnected a network cable. I also tried installing Windows 7 analysis with similar results. Any help would be appreciated gratefully.

  Thanks a lot for your quick response and help.

• HP psc 1315 is compatible with Vista?

  Hi, I have an old printer, HP PSC 1315, I used it with my XP OS. I just want to know if I could install it too with an OS like Vista. TIA.

  Hello

  I suggest you go to this web page for some great information that will help.

  Good luck and come back to mark this as an accepted solution if it works.

  Best regards

  Park

• option "scan printer" missing in the Win8 HP Solution Center

  I use a Photosmart 6380 printer.  I'm trying to scan to a HP 2605dn color laser printer.  This works fine in Win7 with worm 130. XXX of the Solution Center software.  I can't find this option in Win8 with worm 140. xxx! I tried a full delete and reinstall but no change. It is a 'feature' of the Win8 software or a "bug"? Is there a work around for this problem?

  Hi mmcdowel,

  I can't wait to hear that you have questions.  Unfortunately the full software functionality for this printer is not supported by Windows 8.  Click here to see compatibility of operating system and features.  The suggestions below can enable analysis with the LaserJet.  If you want to learn more about your product, click here.

  Try using a different program, however I cannot guarantee that it will detect the scanner:

  1 Scan and fax from Windows

  2 MS paint

  I hope this helps!

• HP Solution Center V14 will not display the scanning buttons.

  I just bought a HP Photosmart Premium c410a printer and I can't get it to scan anything either the printer or the PC using HP Solution Center V14.  I did the following:

  Installed the printer in a wireless device and the software stopped with a fatal error during the product Config.

  Everything uninstalled.

  Reinstalled the same printer way and same result.    Icon of the solution Center HP desktop, but when you click it nothing happens.

  A ran HP printer Diagnostics and it showed the error scanning.

  Everything uninstalled.

  Reinstalled the printer this time as a USB connection, install via the test page printed, itself went well.  Clicking on the icon, HP Solution Center and it worked but do not display any Scan keys and if I press the analysis on the printer all them that get is the "Scan problem" and I need not the printer to tell me that as well.

  Downloaded the latest version of the software of HP and Yes uninstalled and installed as a USB connection and everything went well, but the same result using HP solutions Center.

  Can I send items to the printer, I can copy documents if the printer seems to be ok, it's just that useless software.

  Any ideas (other than to return the printer to the store and get refund, which will be soon I think) or suggestions appreciated.

  Steve

  Dr. & ShlomiL,

  Thank you two for your help, I've updated my FlashDrive to v11, still no luck so I used HP uninstaller and made a level 1 to level 4 don't uninstall get rid of everything related to HP.  I think part of the problem might have left to install my old printer psc1210 overs or my wifes.   After uninstalling and then stop firewall, protection against viruses and any other useless software, I had installed another as a wireless printer and it WORKED, yippeeeeee

  So now everything works perfectly, thank you once again.

  Merry Christmas and good luck for the holidays.

  Steve

• Why the HP Solution Center loses my documents after scanning?

  While tryning to scan a document, the document, but the document "digitized" HP Solution Center ever recorded. I changed the output type (.pdf, .tiff, etc.) and I've changed the "save to" folder, no joy. Since I am on Windows 7, I downloaded the patch "DOT4" and re-installed the software and... nothing. Noticed that the "open file after the backup" function has failed when I tried it either. Help!

  Seems that there is an update to fix the component that controls it.  You can get the update from the link below.  Let me know what happens.

  http://support.HP.com/us-en/document/c01960605

• PSC 1315 + seven 64 bit error scanning

  My setup is a Hp Pavilion with win seven 64-bit (with all the latest updates) and a psc 1315.

  It still works fine with the HP software but now I'm trying to scan a document to a pdf file and I the situation below:

  Windows not in use HP scanner, the scanning starts but it is very slow and when she finishes the software gives the error below.

  I try the following without result:

  -changing the mode to save (tiff, jpg, ecc) and the scanning resolution

  -restart the pc and printer

  -uninstalling and reinstalling the driver from hp and corrective software and more recently

  -performing HP print and scan doctor (everything is ok for him)

  The only way to do a scan now is directly with the windows software.

  Any ideas to solve the problem?

  

  Hello, I read the proposed guide, I'm in the first case, all versions of Flash are updates, 12,0,0,77.
  According to the guide, I have only to reinstall Hp software but I just did.

  I also ran the patch that you set (and rebooted) but nothing is changed.

  Edit:

  I am remembered that some time ago I increased the font size in windows (DPI resolution of 100% to 119%).
  Now, I tried to get back to 100% and now the HP software works well.

  At this point, I changed to new resolution to 119%, and however it works well.

• PSC 1315 software for Win 7 will not convert scan to PDF

  I spent hours back on the site of HP driver download once the installation CD would not be installed Windows7 is not supported. Really? So I came on the HP website to download the drivers with some install kinds of utility, alond with a lot of software that I really didn't.

  In any case, I can not save a document in PDF format (Yes, I do have the last XI Adobe) with the new "HP Solution Center" provided with the software and driver download.

  The former "HP Solution Center" that came on the installation disc allowed me to do on my old Vista 64 machine. It was a one step process. Scan to file, choose .pdf and it put the file in the folder for you.  Now, I don't have a solution, and I don't want to spend the time necessary to "convert" my .jpeg, .tif, .bmp and .png (this is what is offered)

  I tried to see if I could get just the part on the disk HP Solution Center, but I don't see that he listed in the folders like this.

  It's the original:

  

  New HP Solution Center. Note that the Adobe name is attached to the .jpeg. Happened after I tried to open a jpeg and Adobe popped up. Adobe has a way to get himself in the files has nothing to do with. In any case, here's the new S.C.:

  Sorry, she is so small, I resized it.

  Never mind.

  I got it fixed. Center solutions work and analyses directly to PDF.  There are several versions of the software scan it appears (does not check versions) and install a new version does not always uninstall the old files.  It is possible that the first time I installed the Solution Center, it has been altered.

  That's where I went to get it:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=374568&refer=HPSolutionCenter&

  Since the download knew what OS I (WIN7Pro 64), she won the right software.

  It works great now. Maybe better than the version of very ancient origin in the first message in this thread above.

  I also downloaded the free PDF Creator 24, to convert other files to PDF I've already had to be analyzed in the form of images. It was the great help, instead of having to buy the creator of PDF from Adobe.

  Nobody has answered that call for help, so I thought what to do.  I found the answer here however.

• Satellite Pro A40 works now painfully slow

  Hi all, I have a satellite pro a40 which has served me well for a long time here.

  Although it runs painfully slow, now all the programs, including the internet despite my speed of 4 MB.

  I have zone alarm that made regular virus and spyware scans, I tried to defrag and disk clean up but not of the above solve the problem long term.

  Short of ideas, if anyone out there can suggest a remedy? Thank you.

  Hi Urbansafari,

  There are a few things you can try to improve the speed of your A40 - I guess you're talking about the speed (or lack thereof!) to which your laptop seems to be tasks such as opening new windows, programs etc.?

  The first thing to do is to look at the list of all programs start; Uninstall anything you don't need really or use is a good way of clutches back disk space (Windows uses hard disk as 'virtual memory' space to supplement the RAM mounted inside).

  The next thing to do is look at what programs are started in the background when you start Windows. To do this, click Start, then run and type msconfig. In the window that opens, click on the start right tab and you will see a drop-down list of all the programs that start with Windows. Without recognition program names, it may be best to leave them because they can be processes required by Windows. Uncheck all the programs you want to start automatically the next time you turn on the computer. When you are done, click on save and you will be prompted to restart the A40 for the changes to take effect.

  It is perhaps that a new installation of Windows is needed to delete all the temporary files and the old registry entries that have accumulated to over time, in which case backup all your data before running the recovery disc.

  One last thing to consider is the weather you may qualify for an upgrade memory HDD largest capacity, which are both reasonably good solutions worked for a slow running computer.

  Let us know if this is useful and how you...

  Weezle

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• HP PSC 1315 all-in-One use scanner without ink cartridges

  Hello

  Is it possible to use HP PSC 1315 scanner without ink cartridges? A light ink control is brinking and it won't scan.

  Sorry, you will not be able to scan without changing the cartridge.

  The printer is not working with the lights flashing and an error state.

  So, you will need to have LITTLE ink cartridges to scan.