HP psc 1315xi

Similar Questions

• "Out of paper", hp psc 1315xi

  How can I fix the problem 'in paper' on my hp psc 1315xi when there is no 'E' [error] on the screen, it is made of paper and print the test page.  I disconnected the cables for power and usb + 5 minutes but that did not help.  Of course, I appreciate any help.

  Contact HP support.

• HP PSC 1315xi - clean print cartridge does not work, does nothing

  I have a HP PSC 1315xi All in One.  I have just stalled new ink cartridges.  I was able to line up, but I noticed on the impression that black was not feeling right.  I printed a test page by holding the Cancel button and pushing the color copy button to start.  Print out showed that there certainly is a problem with the black cartridge.  So I went in the Toolbox and I clicked to clean cartridges.  I clicked on Clean and nothing happened.  The printer did nothing and he didn't pop up or anything to show, there was a problem.  I waited 5 minutes and still nothing.  I'm on Win 7 Home Premium 64-bit.  Thank you.

  The application of the Toolbox cannot communicate with the printer. Try the following:

  (1) unplug the PC printer by unplugging the USB cable into the PC end.

  (2) turn off the printer and the PC.

  (3) wait 30 seconds and turn on the printer, then on PC.

  (4) when the PC is starting for office, connect the USB cable.

  Now, open the Toolbox printer and check if the option clean cartridge works.

  If this does not work:

  (1) you are able to check the Toolbox ink levels?

  (2) you see the digital imaging monitor icon in the box at the bottom right of the taskbar on your computer screen?

• printer all in one HP psc 1315xi - cartridge error message

  I recently bought a used hp psc 1315xi all in one printer.  The printer is in very good condition and came with a HP 27 black inkjet print cartridge and a tricolor HP 28 inkjet cartridge.  Both cartridges are half full (my computer can read the levels until I try to print).  However, when I try to print something from my MacBook Pro an error message that says the black print cartridge (and then soon followed by cartridge three colors) is not compatible with the printer.

  I checked the cartridges, and certainly they are supposed to work with this printer.  I tried cleaning and even uninstall the printer from my computer software but nothing has worked.  I don't understand how the printer can read how much ink is left in the cartridges but goes on to say that the cartridge is not compatible.  Please help me.  I don't want to buy new cartridges and it just happen again (and be $50 more poor).

  Thank you!

  Hello

  I totally agree with you.

  If you are in the United States, please call HP for Technical Support and you may be provided with the option to upgrade to a printer.

  Please call the HP Technical Support for assistance.

  If you are in US, the toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Is the hp psc 1315xi printer wireless?

  I hope that this will be my last and only issue only.

  Is the hp psc 1315xi printer wireless? If possible could you tell where I can get how to set up the information?

  Thank you for your time and your efforts in this area

  No, it is USB only.  For more information, drivers and manuals for your printer using the "Support & drivers" button at the top of this page.

  Here is a link directly to it: http://h10025.www1.hp.com/ewfrf/wc/product?product=374572&lc=en&cc=us&dlc=en&lang=en&cc=us

• PSC 1315xi: Scanner does not work

  I have exhausted all regulatory processes to get the scanner to work.  I deleted the printer program and downloaded and reinstalled the program.  I restarted my computer laptop and everything that was suggested by the print and Scan, doctor, etc...

  Initially, the problem was that the "scan" button has not activated the scanning process.  However, I could go to the program file and scan from there.  Now, nothing that I see to make it work.

  Would love some suggested procedures to follow...

  Henry

  @HenryVIII

  I can offer the following:

  • Trying to reinstall all the software of full functionality, consider the software in the category of updates > updates are installed AFTER the main printer program.
  • Try using Microsoft Fixit to remove the existing printer software before installing the new copy
  • Ensure that your Flash from Adobe are up-to-date
  • Ensure that the Adobe Reader software was updated to the latest version of Adobe Reader DC, you can run - do even if you do not use the Adobe Reader software > software printer like Adobe Reader...

  Reference:

  HP PSC 1315 all-in-One Printer - drivers

  Full software features:

  File name: AIO_CDB_Full_Non - Network_enu_NB.exe

• printer model hp psc 1315xi printer all in one

  yesterday downloaded from ms drivers of Web site to windows vista Home premium.  everything works except "Hp Solution Center" click the icon and the message says "will now close"how to fix it? ".

  I GET A RESPONSE FROM THIS HP SOLUTIONS CENTER CAN NOT BE PERFORMED IN "DOS."  Are there

  AN ANSWER ON HOW TO FIX THIS SO I CAN USE THIS PRODUCT?

  TRFF

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• PSC 1315xi All in one print in color instead of black on windows 7 and 8

  In our House, we have three computers: two laptops, one running windows 7 and one running windows 8 and one desktop running windows xp.

  On our office it prints fine, but on two laptops when trying to print black text Print instead in a grayish blue color. I am trying to print in color works on all computers. Or ink cartridges are empty.

  As he works on the desktop, I guess it's a driver issue, but I can't find a solution.

  Hello

  What ink cartridges you actually have in the right slot of the printer, a black cartridge 56/27 or a 58 Photo ink cartridge?

  The supplied sample occurs even if you have a Photo cartridge in the printer...

  With the help of a cartridge Photo is not intended for printing the text in black, but for printing Photos and will not have a gray color effect...

• Problems printing HP psc 1315xi all in one

  A week ago I had a few problems when I feel.  It took a long time to get anything to print.  I received an Error Message, then the light "check print cartridge" flashes.  I've done all the troubleshooting I knew how and nothing helped.  The ink cartridges are new.  The help section HP says that my color print cartridges need to be replaced.  But again, it is brand new.  I unplugged the printer from the computer, etc..  It did not work.  I also followed the steps for cleaning the ink cartridges and and the contacts inside the printer.  It also did not work.  I don't know what else to try if anything.  I've never had problems in the past, with the exception of the 'paper print quality map' keeps printing after all the documents I print.  Is there a way to prevent this? I use a computer incredibly when it works, but when something breaks, I'm a real disadvantage.

  I checked a site and they wanted me to pay for assistance.  I want to just my printer fixed.  Can anyone help? I appreciate it.

  It seems that your color cartridge has failed.  I suggest you to check the warranty of the cartridge as shown here.

  The worksheet that prints an alignment page, it will stop printing once the alignment is complete. To complete the process, you will need to load the paper on the scanner, and then press the scan button as shown on page 33 of the manual here.

• Where download/reinstall gc_wOL_ENU_NB, Psc 1310 Series All in One, XP 32 bit.

  This file has rolled back to SP1, due to the interruption accidentally a system restore.    Repairman got SP2 and 3 back, everything except the printer.   I have a 2007 disc, but sometimes don't you HP Director with her.  Currently, he continues to reject the HP 28 colour cartridge, wants an old one, HP 58, can also print Page align cartridges, but no Popup click box to line up.

  Hello AmerEagle

  Suitable for the PSC 1315xi driver can be found HERE.

  You can find the site of HP supplies ink cartridges safe. Safe in HP

  If you decide to buy a new printer HP Photosmart printers would be probably the closest.

• hp1315xi printer all in one

  What should I click on go direct to download for printer hp 1315xi all in one download from hp

  The 1315 and the 1315xi use the same software, they are part of the same series, but if you prefer the 1315xi page, it's here > printer drivers all in one HP PSC 1315xi.

  If you need help, please post your OS and version, Mac or Windows.

• WPS 9 does not print several pages

  How to print multiple pages of the same document WPS (9)? It prints one even if I choose more than one. I have HP psc 1315xi printer.

  Hello

  The question you have posted will be well suited in Microsoft Works. I suggest you to send your query in Microsoft Works Support Center for better support.

  http://www.Microsoft.com/products/works/support.mspx

• Cartridge problem: blessing to stakeholders

  hp psc 1315xi all in one: Somewhat 'pins' prevent my cartridge to move freely after a paper jam. I can push it down and move the cartridge, but they stand unless manually pushed down! Blessing for stakeholders.

  Ciara

  Thanks a lot for your response to my call for help.  I continued sleeping with her until I saw a few teeth bit who were blocking the cartridges don't moves back.  Once I pushed them in place, everything began to work well again.  My printer is old, as is my computer, two HP products.  I invest again in HP products, likely this fall.  Thanks again for your reply; Bless you.   Marcia

• gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  I try to install the full feature driver for my PSC 1315xi on two WinXP Pro PC.

  One worked perfectly.

  On the second, when I run the exe download, I get the message 'Extraction', but when he goes up to 100%, never open the setuup window.  And no error message is displayed.  I searched and found a log file which was produced.  It includes the following:

  GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  System LangID = 1033.  mapped to ENU
  # The system language is ENU, but is not on our CD!
  # We couldn't understand a language to use and return FALSE from CICECmdLine::GetLanguage()!
  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  Installer returned 1603

  Any help would be appreciated.

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.