HP psc 1350 &; Windows 7 64 bit. The drivers are installed, but when I try to print...
I've deleted and reinstalled several times. I've done that it is connected to the internet, etc. I even watched the progress of the drivers being installed. And nothing.
The scanner works perfectly, is not the cable. I tried all the HP diagnostic tools who say there is nothing wrong, checked for new drivers. He drives me crazy now! Can anyone suggest that a last resort solutions please?
Thank you
VB
-Office 2010
-AVG internet Security 2012 (I test to see if the firewall was causing a problem)
I (literally) dusted off our old computer and tried the printer. Similar problem, despite all the old drivers are always there.
Due to the backlog of work at home of my son, we have admitted his defeat and bought a new printer. And we had the same type of problem. Further research on the internet, which suggests to restart the print spooler in Services.msc and finally we managed to print something!
Thank you for your help.
Tags: HP Printers
Similar Questions
-
I downloaded lexmar x 5075 software from their site in my net book an acer. everything went well and he said ready to print. When I tried to print, nothing happened. I went to the troubleshooting section, and it says not connected printer. USB cables were were very good. any suggestions
Hi Donald,.
See this:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problemshttp://support.Lexmark.com/index?page=content&ACTP=LIST_RECENT&ID=SO1625&locale=en&UserLocale=en_US
Concerning
Terminator -
There is absolutely no sound at all on my computer, & all the drivers are installed, including updated! It is not a missing driver or driver problem not up-to-date. Windows and Microsoft troubleshooting, fix - it, & when in properties, all say that no matter what and everything to do with the sound on my pc is all working properly! but still, it continues to hold no noise at all! I tried literally everything allll day and can not solve this problem. :: (
original title: no sound
Hello
1. did you of recent changes to the system before the show?
2. what fix tool that you have tried to solve the problem?
3. What are the troubleshooting steps you have tried to solve the problem?
Method 1:
Follow the link below, open the playback control Audio troubleshooterand if it helps.
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
Method 2:
Follow the link below, perform the steps and check if it helps.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Method 3:
Follow the link below, perform a clean boot and check if it helps.
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Let us know if it helps.
-
I KNOW THAT MY DRIVER ARE OKAY, BUT WHEN I TRY TO SCAN SOMETHING I GET ALL 'PC STANDBY' MESSAGE BUT NOTHIING HAPPENS MORE ANOTHER MESSAGE IN MY MONITOR THAT INDICATES THAT THE SCANNER IS NOT CONNECTED OR UNABLE TO LOCATE HIM, WHAT SHOULD I DO TO FIX THIS?
SINCERELY
BENJAMIN MONGE
MY PRINTER IS A THREE FUNCTION PIXMA MX410 I BOUGHT IN SEPTEMBER OR AUGUST 2012, AND I ONLY USE IT FOR HOME. MY COMPUTER IS AN HP WITH a MICROSOFT WINDOWS VISTA HOME PREMIUM, AMD Athlon (tm) 64 X 2 Dual Core Processor 2.0 GB. ATI RADEON X 1050 secondary.
Sincerely.
Benjamin Monge.
-
Original title: what I am doing wrong?
I just reinstalled Windows XP on a blank hard drive (new). I have installed WLAN driver disk resource. I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here. What can I do?
Hello
The following articles may be useful:
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Printer is turned on, is recognized by the computer as the default printer, but when I try to print a page, I get nothing. Have you tried "Troubleshooting" and it says I have 3 items in the quieh that prevent printing?
Hi, Mike,.
A moderator has moved this thread to the hardware and drivers Forum. Note the drop-down menus by clicking on the links below. Thank you.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware
Save the documents you want to print
Open the Printers folder
Right-click on the printer icon and select open
Click file > cancel all Documents
Close the print queue
Start > type services.msc
Scroll down to print spooler
Click with the right button on spooler and select stop
Wait for Windows to stop the Service
Close Services window
Start > right click on computer
Select manage
Select Device Manager
Click on the + sign next to the IEEE... compatible printer
Right-click on the driver and select uninstall
Click on the + sign next to imaging devices
Right-click on the driver and select uninstall
Click on the + sign next to printers
Right-click on the driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the printer driver and select uninstall
Close the Device Manager
Computer reboot and Windows will reload the drivers
Back to Services.msc
Right-click on print spooler and select start
Wait for Windows to start the Service
Services nearby
Try printing again
Go to the manufacturer's website and search for driver updates
-
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
It's a delicate issue... like some patches cannot stipulate pitchbend...
But to quickly test your pitchbend wheel actually works properly...
Download the free lunch monitor...
Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.
-
I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version. Help!
It seems that your version is not the latest.
Check help / about... what version it reads.
It should be 2015. (9.2.0 build 41)
Otherwise, please update your version via app updates... or cloud in respect of aid.
-
I have problems, adding comments using Adobe reader DC on my pro 3 surface. I can select the circle for example, but when I try to draw the circle nothing happens and the screen just scrolls in the direction I move the pointer?
Hey paulc6148125,
Please try the mode settings different button in Adobe Acrobat Reader DC-> leModifiermenu-> preferences-> general categories.
Kind regards
Nicos
-
Have run the HP Diagnostic print comes very well, very good copy. The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.
Hello Ann,.
Allow me to quickly gather information about the issue in order to guide you in the right direction.
1. what version of Windows is installed on the computer?
2. what web browser do you use to print from the internet?
3A this works much earlier?
4 have have there been recent changes made on the computer before the show?
I suggest you to refer to the links and check if it helps.
Problems printing from the Internet
I can't print or preview before printing a Web page in Internet Explorer
Printing webpages: frequently asked questions
Please post back with the results and we will be happy to help you further.
-
We have seen an increase in the number of calls from customers indicating that when they try to print from Outlook 2007 (Windows XP SP3 + all updates), they receive an error indicating that there is no installed printer. However, they have not only more than one printer installed, but they also have a default printer set. Restart the print spooler solves this problem, but it is not clear what caused its all first. When we stop and possibly restart the spooler, we notice that for a while, it crashes when stop and the following appears in the event viewer:
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7011
Date: 10/20/2009
Time: 09:38:48
User: n/a
Computer: XX-YYY-123456
Description: Delay (30000 milliseconds) waiting for a response from the spooler service transaction.Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7011
Date: 10/20/2009
Time: 09:39:18
User: n/a
Computer: XX-YYY-123456
Description: Delay (30000 milliseconds) waiting for a response from the service transaction.Related to this, last week we received a number of calls from users telling us their machines suspended once during the logon process to enter their credentials. Even 20 minutes of waiting does not solve the problem and restart the machine took care of her. We have a long login script so I added the lines that surround and inside the different functions, calls, WMI queries etc. within a specified period that he might be the cause of the problem. Turns, when the script got to the point where he enumerated the list printers, he hung the machine. (The code below at the bottom.) Once this comment out code, users were connecting to fine, and the same timeout error preceding appeared in the login script. What gives!
Sounds to me as we have a problem of possible spooler, but outside the removal & time printers and their drivers, I'm not sure where to look, or why it affects only a small percentage of our population and more importantly again, suddenly. I'm open to suggestions.
* Excerpt from Login Script
login_printer_list = «»
Set colSettings = objWMIService.ExecQuery ("" Select * from Win32_Printer ' ")
"I already had a 'debug' function that will write to a log file
"just prior to each registration statement." Then the newspaper
"appearing on line indicating he was beginning the process..."
For each objWMI_Item in colSettings
"It was not anything beyond the code above in the process." Where this
"comment is, I got another line, where he would be out
' objWMI_Item.name in the debug log.
login_printer_list = login_printer_list & "-" & objWMI_Item.name
If objWMI_Item.Default = True Then login_default_printer = objWMI_Item.name
Next
-EOFAny help is greatly appreciated.
--
Julius G. Perkins, IV
Enterprise systems
Architect jobPlease click on the link for the information below:
http://support.Microsoft.com/default.aspx/KB/811428
MOEEN AJAZ KHAN MD - MCP/N + / A +. -
I have a Yeti Pro microphone. Drivers are installed for her on my Surface Pro Windows 10 Tablet.The Mic works very well with the resident of Movie Maker, but Adobe Premier elements 14 tells me that there is a driver issue when I try to save the web cam - on the part of the media add the program. Any suggestions?
That you click the audio settings button, it should open in a window in which you can select audio input and output settings.
Like this.
-
I just installed recognition speech dragon, but when I try to open this msg of error says "cannot find media device - Hosea t check if your computer has a sound card or if the wave multimedia component is missing from the sound card.» my monitor has built-in speakers and I can listen to music, news, etc.
You have a microphone? He is looking for an INPUT device, not a one OUTPUT. Also, check device manager to make sure that you have not a driver problem. To get the Device Manager, click Start and right click on computer, then click Properties. Click Device Manager, and then look for entries with? or! beside them, which indicates a driver problem. Finally check that your microphone is plugged in the right place on the computer, unless it is based.
I hope this helps. Good luck.
-
Hello, I have successfully downloaded creative cloud and from there downloaded HAVE but when I try to open it all that happens is that a Web page opens with three tutorials. The program itself does not open.
Any help would be appreciated.
Thank you very much.
Sarah
If it is not on your desktop, check your c: / / program files/adobe/directory to a subdirectory of adobe illustrator.
-
Windows Update informs that the updates are available but the available updates list is empty
Windows 7 update gives me updates (1 important, 2 recommended) but when I click on the text that would normally be the list of updates of the list that I show is empty.
So far, Windows Update worked fine. Any idea?
Who has not helped, according to these instructions gives me the same update screen I've always seen.
In any case it is not important to me anymore, once I rebooted my computer the screen update began once more to work.
Maybe you are looking for
-
Why does not my Adobe Reader 10.1.9 FF?
I have Adobe Reader installed 10.1.9 and every time I check for updates plugins FF tells me that it needs to update. When I try the update, he wants that I download and install the version 10.1.4. Why?
-
I currently have Firefox 9.0. Why the start page for firefox keep telling me that I don't have the latest version?
-
Qosmio X 870 - 15 d and Win8.1 - pop-up message "Test Version of Flash Cards.
Hi eveyone! Since I've updated my X 870 - 15 d native Windows 8 for Windows 8.1, I get a popup message saying: "+ * TOSHIBA Flash Cards * + (title) + * Win8-TestVersion * +" and two buttons 'OK' and 'Cancel', whenever I start; all that I have the but
-
8.15.10.2202
I have a HP Pavilion dv6 Notebook PC, product number XG738UA #ABA. Flash has stopped working for me after I've updated. I get useful things like... The application databases NameFirefox Version8.0.1 User AgentMozilla/5.0 (Windows NT 6.1; WOW64; RV:8.
-
the screen is often very hot.
My computer Vista Deskstop, the screen gets very hot and hurts College the screen due to the hot flashing my body.