HP PSC 1610 all-in-one - can't sweep

Similar Questions

• PSC 1610 all-in-one

  Can I e-print to my HP PSC 1610 all-in-one?

  Hi JudithAMorrison,

  Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.

  If you need anything more, please let me know. Have a great day!

• HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation

  I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.

  Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• PSC 1610 all-in-one several error messages

  Hi and thank you for providing this service.  I have a PSC 1610 all-in-one, bought in August 2005 which is used with a Compaq Presario Windows XP (they were purchased as a Pack).  I started to receive error messages, more which start with 0 x, I have determined is an ink system failure.  Sometimes the messages sometimes say 'failed to initialize' or 'hw_interrupt '. At this point, I can use the power button on the 1610 and it restarts, sometimes producing a print.  Other times he repeats just with a different error message.

  I've uninstalled and reinstalled the software from the original CD, and also did the instructions on here regarding unplug USB cable, power unit, waiting, etc.  but unfortunately, I'm still having the same problems.

  I guess my questions are 1) is there anything else I can try to solve the problem and get back to happily print my genealgical research and/or 2) because the machine obviously lack of professional maintenance and it's so old, I would be better off just buying a new all-in-one?  (New Anthing I would buy would have both with this older Presario and a laptop HP 3 year running Windows Vista).

  HI -.

  I'm guessing you've already gone through the steps described in this document?  If so, on the only option I know is him having served.  In answer to your other question, with the price of all-in-one now, it is probably a better option to just buy a new one.  You can find the plug on current on this site printers.  You can do some comparisons between several printers to see what OSs are supported.  Wish I had better news.

  Hope that helps.

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• PSC 1610 all-in-one printer: PSC 1610 will not print

  HP PSC 1610 all-in-one

  No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

  Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

• I have a hp psc 1610 all-in-one printer

  my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message

  There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.

  Hope this helps

• How to remove memory card from my digital camera to a PSC 1610 all-in-one

  I first took my Sony Cybershot memory card and it is stuck in the slot of the PSC 1610. It seems that the printer/scanner read the card properly because I was able to print a photo proof.

  I tried to use Picasa on my MacBook Pro to transfer the images from the memory card in the printer to the laptop. That doesn't seem to work, so I would get the card memory of the printer/scanner. I don't think just pulling on the map, it's the correct procedure... how to get out? I pushed several buttons on the PSC 1610, nothing helps.

  Any suggestions?

  Hello

  1. is not a good idea to copy photos, files on camera, specially made in the shape of these cards memory cards.

  2 normally, just gently push the card once again, and then exit, the card should come out.

  3 you must map the map as network drive until you can access the card of your computer (s). Here's how (valid for all memory cards):

  http://support.HP.com/us-en/document/c00149194

  Kind regards.

• My Mac does not recognize my PSC 1610 all-in-one printer.

  All of a sudden my mac does not recognize my 1610 printer all-in-one.  I think it may have something to do with the system 10.8.2 upgrade but I'm not sure.  I followed the instructions and uninstalled and reinstalled the software.  Software update does not seem to think that miss me anything, no update is listed.  Nothing has changed other that the OS and I use this computer and the printer for 3 years.  No printer appears in the list of system preferences.  Error when I try to print is 'not connected printer.

  Hi beaumast,

  Have you tried using a USB cable?

  If you tried it on your friends computer and got the same experience there is a possibility that the USB port on the printer has malfunctioned. Here are some links that you may find interesting if you consider upgrading your printer.

  HP trade-in program

  Current for sale Photosmart printers

  HP out of warranty of the Support Options for selection of printers HP

• PSC 1315 all-in-one can be used as a fax machine?

  I thought I had faxed before 1315, ha ve in hook new computer and now it seems that I can't send fax, it is even possible to use while a psc 1315 as a fax?

  Well, no, it isn't. You can see the specs here PSC 1315 specifications. If you had faxed to her, you would have a phone line connected on it.  Maybe you tried an e - fax service and the printer to scan the document.

• Scanning Cougar problem: HP PSC 1610 all-in-one

  I have an iMAC nine and like all the others in the forum, have tried all suggested: made to remove and readd the printer, tried to get the app store to search for updates download all new s/w (because mine is very old), etc, etc.

  I can't get any dwonload HP scanning software, but I can get the printer to perform a scan using all the different software options suggested Apple.

  However, no matter which option I use, when I scan, the preview image looks perfect, but the scanned image is still cut off and I can't find options or parameters that will get everyone to analyze.

  For example, if I scan a page 5 X 8 with images and text in PDF, the preview image is the entire page, but the scanned image is just a bunch of page, maybe 1 X 8.

  Any help would be great because I rely completely on scanning to send different business and pertsonal business documents.

  (Note: any other print and copy functions seem to work well; has not tried to download photos yet.)

  Thank you.

  Hello

  Try following the steps below, I think that should help:

  Open the application OS Scan (e.g., printing & scanning or Capture of Image)

  Click view details.

  Don't forget to set the option of automatic selection under Off.

  You can also ucheck use custom size option and select format A4 or letter...

  Shlomi

• HP PSC 1610 all in one printer Scanner Copier

  Seen the documents problem scanning.

  Receipt of message is 'no scan options '.

  Where can I get software to 'device '.

  searched for the PC using HP Image Zone and can't find it.

  Why don't you try uninstall the program from your computer and put it back, via the software provided by HP (link below). Try and let me know what happens!

  http://goo.GL/lx9cO

  Have a great day!

• How to scan without ink in psc 1610 all-in-one? I don't need to print, just scan

  I use Mac OX 10.6.8.

  The error message is "Insert print cartridges."  But I have another printer for printing, I don't need it for scanning.

  Hi Casey,.

  Are how you trying to scan? If you use the HP software, try using the Apple built in scanner (imager Apple) it * may * allow you to bypass the no problem ink.

  In addition, you can mark a resolved post by clicking "mark as solution" by a mail, right next to the reply button.

• HP psc 1610 all-in-one - reset to factory settings?

  Hi, I did the research for reset my printer, but evewrything does not, it shows on screen: remove and check color cartridge, but the steps to reset the printer as disconnect, press ok & cancel at the same time and then reconnect does not solve my problems. I bought the new cartridge, it did not fix my dilemma! What else can we do? Help, please!

  Thank you

  floridapetra

  I am convinced that you have a hardware uncrecoverable failure.

  I sent a PM to you

  Todd_sd