HP PSC 1610: The HP PSC 1610 printer error
The printer displays: remove and check right cartridge.
I have done so repeatedly, so turn, but not luck.
Ideas of cause / problem please?
Hello @biddlegirl,
Welcome to the forums of HP.
I understand that your printer is rejecting the cartridge on the right.
I would like to help.
Try to go through the following documents.
Error message "Problem with print cartridge" appears on the control screen
"Remove and check color/black pen" Message appears on the control panel for HP PSC 1600
Tags: HP Printers
Similar Questions
-
Original title: HP Laserjet 1300 Windows XP, SP3 error installation
When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.
CANNOT INSTALL THIS HARDWARE
There was a problem installing this hardware
HP Laserjet 1300 PCL 6
An error occurred during the installation of the device.
The specified Module could not be found.
I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error. The record show error install printer on each attempt of events. Can anyone help? Thank you
Hello
You are able to install other programs?
Method 1: See the following article:
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406
Method 2: view the following steps and see if that helps.
(a) disconnect the printer
(b) uninstall the software and drivers on the computer
(c) plug the printer back
(d) allow the Hardware Wizard search for drivers
e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.
-
I tried many remedies for this problem: I receive error on the small screen codes:
When it is plugged into the USB port, the error is
' Error: 0xb90000d9 '.
===============
"165: hw_interrupt_hwv2.c.
When the printer is standing alone and not plugged into the USB port the screen reads:
' Error: 0xb9000022 '.
- - - - - - - - - - - - - - - -
165:hw_interrupt_hwv2.c
I tried to unplug the power, wait for 1 minute & reboot;
In addition, re-setup of the printer with the disc provided that did not help so I went to the HP site and downloaded the following file:nn_rub_w01_Americas_Euro1_NB.exe and installed the drivers etc. using this file. Yet, nothing works.HELP ME HERE, PLEASE!
OK, after spending hours to surf on a fix I called HP technical support. Long story short, the man at the other end finally stated that the printer is depricated and the fix is ONLY upgraded to a different HP printer for $99. We think they could have put it up on their website, but no. I think I'm done with HP. It was not an experience I want to repeat
-
LaserJet M506: the 99.39.64 printer error
Printer worked fine for 2 months and today he came up with an error code 99.39.64
Unplugged and plugged in and same problem
any help would be appreciated
310pilot
His only two months old, you should contact HP Support since you have a hardware failure that will probably require a part needs to be replaced.
The MEM is non-functional, that is the firmware of the printer is on the storage device.
Find support for your printer and the link page contact technical support.
If my post is solved your problem and click the accepted as button solution under him.
In order to thank a Tech for a post click the thumbs up button under the post.
You can even click on the two keys...
-
I use Adobe InDesign CC 2015 on Windows 7 and a book with several chapters, each chapter being a separate document. Several attempts to export the book to Adobe PDF failed with the following statement:
"Printing error: Adobe Print Engine failed at the end of your data due to an unknown problem."
When I run the command 'Package book for print', it shows that there are some fonts and missing images. However, as far as I know, I replaced all the missing fonts and I'm unable to see all missing fonts or images on the computer screen. Person documents in the book export to Adobe PDF with no problems, but the book does not print as a whole, affecting the table of contents and the page numbering (e.g. Roman in the front-end vs Hindu-Arabic in the rest of the book). I'm frustrated because InDesign doesn't tell me what the problem is. I'd appreciate any help in this regard.
No, I wasn't trying to PRINT to PDF. I tried to export the book in PDF format in following file > export... and then click on PDF for output. That did not work. However, I just realized that I can export the book by clicking on the small arrow in the upper right corner of the menu that shows all the documents in my book (I don't know how it's called). From there on, I chose "export book to PDF...". "and voila! It worked.
-
I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?
Hi Dee,
Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.
Good luck!
Kosh
-
Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.
My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.
Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.
I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.
I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.
I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.
Thanks in advance for all who are able to provide me with assistance.
Thank you
Alison Black.
LIVE FAST, FIGHT HARD CLOSE.
HUSTLE, LOYALTY, RESPECTJohn Cena (WWE Wrestling Heavyweight Champion)
Hey
HP have the customer.
has attempted to call them abt the question because I'm clearly useless with this technology * beep *.
but fisgured this is a setting of the printer.
so if you have the HP SOLUTIONS CENTER's new installed.
down the down theres a SETTINGS tab click on it.
go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.
the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED
Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.
-
Remove and check color HP PSC 1610 printer cartridge error message.
Original title: remove and check color cartridge
My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.
Hey cobra10,
Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How do I change computer to use only the black cartridge for print on PSC 950 h
I'm having a problem with my hp psc 950 printer - when I try to copy something it gives me an error to support code on enter to align cartridges-i do this and it is not always copy - how can I change the printer to use only black ink, the color cartridge is probably more good, I just changed black ink and I really don't need the color in my copies - all solutions would be greatly appreciated
Thank you
Hi yalulu,
I understand that you do not use the black cartridge only. I find the features page and the manual for the PSC 950 but did not find that I was looking for. I would suggest trying to use the printer in mode single cartridge, but I am not sure if the printer supports this feature, that's what I was looking for.
Try out both cartridges, then put in black only. If this does not work, the only other suggestion I have is to replace the color cartridge.
You can use the below document to troubleshoot color cartridge, select the document that best describes the issue, or take a look at the same time. You can find these useful.
I hope this helps to solve the problem you are experiencing.
-
The light remains on my HPPSC 1610 printer and said "shutting down", but is not closed.
Unable to get that it is reactivated.
You should be contacting HP about this problem, but an easy way to start again is to unplug it, and then reinsert the plug.
-
Align the PSC 750 printer ink cartridge error message.
I just replaced only the black cartridge in my printer PSC 750. (Will replace the color cartridge later as my money allows.) The printer is connected to my laptop, MacBookPro, under OS X, version 10.6 operating system. After replacing the cartridge, I ran a self-evaluation report. It seemed to run correctly. No color cartridge only test model because there is no ink in the cartridge. Then I ran the process to align the print cartridge which gives an error on the printer. It displays "error: Align page not detected" when I clearly placed the page alignment on the scanner glass. Tried this process several times and each time I get this error message.
Could it happen because I have not yet replaced the color cartridge? If not, then what?
Alignment requires the black and cyan (or was it yellow on this model?) part of the color cartridge to print for correct alignment. If you have an old copy of the alignment page you can use it, although the alignment would be suboptimal.
Soak the printhead of the cartridge 78 in 1 "hot water for ten minutes and then gently the printhead from drying and put it back in the printer may allow enough ink complete the alignment page.
-
PSC 2175 Print gray boxes behind the text
Recently this HP PSC 2175 printer has been printing gray background behind all the text boxes. It comes from occurring when printing from Windows, launching a test print to options for control panel of the printer, or clear text copy. See the examples below.
I have already been through a gambit of the typical diagnosis and determined that there must be something internal that is false because this behavior occurs even when the computer is not used. This isn't a matter of dirty heads print or alignment. The HPPSdr.exe did nothing, but check that the printer works.
Any suggestion would be appreciated. Thank you
Windows Test page
Internal Test page
Hello LB.
I sent a PM, let me know what happens.
-
Printer all in one HP PSC 2175v prints the page number and the title of the document
Printer all in one HP PSC 2175v prints the page number and the title of the document.
This is the default value? Can I disable this? I would prefer to print only the document, without page numbers and the title.
I was printing of either Wordpad specifications, using Windows XP.
Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.
Thank you
-
How to stop a test print page whenever the HP psc 1315 printer is turned on?
Everytime I turn on my HP PSC 1315 printer automatically prints a test page. How can I turn this off? At the same time, I was able to print or copy without a first printing test page.
I also have Windows 7 ultimate installed with a HP PSC 1310.
He kept printing an alignment at each start page, so I downloaded and installed the installer of HP PSC 1315 all in one series printer:
Link:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=374568&sw_lang=
This download works for the 1300 series.
I ran the printer align cartridge utility, page printed, put in the scanner and used the button "scan" as the 'OK' button and it solved the problem.
Thanks for the tip of the "scan" button
-
Cannot print from the HP PSC 1200 printer
My HP psc 1200 'prints' a blank page.
I am running Windows 7 on a Dell computer about 4-5 years.
Printer worked fine until the other day when he stopped to find info from the printer. If this is the problem?
It would not be completed "suppression."
I tried uninstalling and reinstalling, but no luck
When I refer to 'all documents' and 'test page', it will not display order.
It indicates also 'offline '. What is the problem? How she came like that, and how can I get to print "on-line".
TIA
Giborah
Original title: unable to print
Hi Giborah,
Thank you for your update on the issue.
I'm glad to know you found the cause and solved the problem. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.
Thanks again for sharing!
Maybe you are looking for
-
El Capitan &; Legacy Photoshop
I installed El Capitan in January 2016. HUGE mistake, because I was not able to use my Photoshop CS3 since then, and I'm an artist. I lost business as a result of the loss of Photoshop. El Capitan does not allow me to install Java 6 legacy, and I'
-
Apple Watch does not ask for password
In recent days, I discovered something disturbing. If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.
-
Satellite R630 - 11L - BIOS update error message
R630 - 11L (PT31LE) > driver download page shows new bios update available for this model* date * output: 28/09/10* version *:B1.60 - EC1.40* name *: "bios - 20100928154217.zip--> P007Bv160_EC73V140.exe.* FTP - URL *: calleula.asp? ID = 77071 "After
-
Qosmio G20 raid and SUSE 10.2
Hello, I plan the installation of SUSE 10.2 and currently have my HD 2 in raid 0 mode and I was wondering if they would consider Linux as a HD or 2 I want to dual boot with XP. Any advice on this would be very happy. I just tried to install Linux and
-
Change by the Step.Datasource program
I create a LabVIEW tool to update multiple properties of the stage after that some necessary changes. One of the changes has been a step type went a numerical limit to a Boolean success/failure test. Because I couldn't have all sequences (several hun