HP PSC 2410 all-in-One printer will not print

PLEASE HELP ME GET MY PRINTER TO PRINT - PLEASE

Advertisement

Hello

1. what exactly happens when you try to print?

2. you get any error message?

3. don't you make changes to the computer until the problem occurred?

I suggest you to try the steps below and check if it helps.

Printer in Windows problems

http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

Hope this information is useful.

Tags: Windows

Similar Questions

  • HP PSC 1510 all-in-one printer

    My OS is Windows 7.

    I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

    Hello

    Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

    Follow the steps for troubleshooting instructions.

    (1) how you try install the printer?

    (2) using a CD/DVD to install the printer?

    Follow the steps for troubleshooting instructions.

    Method 1:

    I suggest you to refer to a link.

    Diagnose and automatically fix problems printing and printer.

    http://support.Microsoft.com/mats/printing_problems/

    Method 2:

    I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

    HP PSC 1510 All - in - One Printer Drivers & Downloads.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

    If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

    Thank you.

  • Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

    Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

    My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

    Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

    I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

    I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

    I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

    Thanks in advance for all who are able to provide me with assistance.

    Thank you

    Alison Black.

    LIVE FAST, FIGHT HARD CLOSE.
    HUSTLE, LOYALTY, RESPECT

    John Cena (WWE Wrestling Heavyweight Champion)

    Hey

    HP have the customer.

    has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

    but fisgured this is a setting of the printer.

    so if you have the HP SOLUTIONS CENTER's new installed.

    down the down theres a SETTINGS tab click on it.

    go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

    the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

    Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

  • HP Officejet 6200 all-in-One series will not be printed. I get the message that the spooler is not connected.

    I have a HP Officejet series 6200 all-in-One that will not print. I received the message that the spooler is not connected how to fix this problem? Thank you. Margaretjc

    Moved from feedback

    Original title: impression of the printer

    Contact HP support.

    CrystalBall © also SEZ...

    If it's a computer with Win7 with IE10 installed, have supported HP make you that your printing software currently installed is compatible with IE10 (yet). [The chances are that it isn't.]

  • Windows RT and HP PSC 1510 all-in-One printer connection

    Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

    Hello

    I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

    http://support.HP.com/us-en/document/c03168175

    Kind regards

    Shlomi

  • HP psc 1210 all-in-one printer: HP PC all-in-one printer

    Printing test page fine.  Prints the first page of the document very well.  After than that, each page becomes lighter and blurred until unreadable.  This "bad s.  Printer is several years old and has been the impression so far.

    Hello @bdr777,

    Welcome to the HP community!

    I hope you have a pleasant experience here.

    I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.

    Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.

    Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).

    If copies are still faded and blurred, try these steps to clean the cartridges:

    1. Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
    2. Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
    3. To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
    4. While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
    5. Reinsert the ink cartridges and perform the alignment of ink cartridges.
    6. Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.

    -Source

    If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.

    I hope this helps!

    Please reply to let me know if we have solved the problem.

  • HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

    Hello

    HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

    Now what can I do to get this printer to work?

    I solved this by using Windows update, which then installed a driver in the end.

    This was not a great experience.

    Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

    Not good PR client on any level.

  • PSC 1610 all-in-one printer: PSC 1610 will not print

    HP PSC 1610 all-in-one

    No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.

    Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.

  • HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

    The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

    Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

    From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

    I am running a computer portable 64-bit windows 7, home premium and USB connection.

    Hey @TKStall,

    Thanks for getting back to me with the error messages.

    The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

    Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

    Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    It has been a pleasure to work with you. I wish you good luck going forward with this!

  • Scan HP PSC 1410 all in one printer works well, does not work with Win XP SP3

    I am well satisfied with my computer HP 2006, Win XP SP3; However when I had to reformat the HP PSC all-in-one printer that works well will analyze any more.  Microsoft says that it does not recognize the drivers for the scanner.

    Try to download software and software updates of the HP Web site.  See if that helps.

  • I have a problem with the HP psc 2210 all in one printer.

    My printer is an hp psc 2210 all-in-one

    All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

    Hello

    Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

    http://WWW8.HP.com/us/en/support-drivers.html

    Or ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/PSG/

    See you soon.

  • HP PSC 1410 all in one printer scanner does not work

    My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

    Hi KennethPlaisance,
     
    Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
    For more information, see:
     
    Method 2: Use the diagnostic utility scan to fix the problem automatically.
    Visit this link to download the utility:
  • Need to download a driver for my HP psc 1205 all-in-one printer

    My HP psc 1205 all-in-one started to play up.   It takes forever (if there is one) to get a page to print.  I end up having to go to services.msc, select "Spooler" and then "restart".  It is said that said in the Description column "files charges to memory for later printing.  I want to just print a page.  I can't find my original disk to restore the printer.  I have check the print queue is empty (no file waiting to be printed).  When I master and P to print the report says 'Idle '.  What can I do to get to normal printing.

    The printer goes back to late 2003. Driver for Windows 7 support and beyond, it is everything that Windows Update has and that's going to be the absolute essential only.

    See here... http://support.HP.com/GB-en/search?q=HP%20psc%201205&filter=-1

    You'd want to consider purchasing a newer model which seeps pilot full support of its manufacturer... :-)

  • What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

    I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

    Hey Fed-Up-with-HP,

    Try using the brush included in the CD or download. Let me know what you find?

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

    10. run the download to reinstall the printer

  • My 6600 all-in-one wireless will not stop printing.

    OS Win 7. My 6600 all-in-one Officejet wireless not printing stop. It prints a "D" in the upper corner and continues printing page after page, until I have to turn the printer off. Without control panel and the error message does not display items to print. No changes, but printer is only a month or so old. As I was leaving the printer and the PC off.  Apparently, he's been using my data limit.  Like 4 times what I used normally. Is this typical?

    @Speechguru,

    I see that you have a problem with a page of report printing after each print job. I know that you don't think that it comes from the WORD, but this solves several issues about the summary reports being printed after each print job.

    Open word, then

    1. Click on the "desktop" (left upper corner of the window) button and then 'print '.
    2. Click on 'Options' (lower left corner of the print window)
    3. Choose the section "display".
    4. Uncheck the box 'print the document properties '.
    5. Click OK for all windows and you're done

    Try to print after that. Let me know the results.

Maybe you are looking for

  • Pages Web fails in the browser withour having to scroll < or >

    Over and over again. I tried to increase the resolution, I tried to reduce the font size, some pages on the we don't adapt my browser window without having to scroll left or right to view the entire page. Its frustrating damned. How can I make Firefo

  • D20 + SATA ONLY + WINXP SP3 32 BIT

    Hi all Testing a D20 for the company and can not get the D20 to run as a SATA drive only. Currently, its spinning the Marvell controller with a 500 GB drive in. Have tried to get into the BIOS and disable the RAID controller but then I can't use the

  • want to 23 powers on, fan spinns full speed but nothing else

    Any ideas? Ive tried looking here but can't find the right strings, or am I the only one to have this, which I doubt... TIA

  • 404 response code httpconnection

    Hello everyboy, can someone tell me why this code returns the message 404 with the majority of URLs, but when I use a rest Client, the same URL works normally and returns a 200 OK response code public class ServiceRequestThread extends Thread { prote

  • Printer - can't check ink levels.

    Hello I have a Deskjet printer All - in - one 3050, it is connected and I can print and all. However, the problem is, when I open the software and click on 'Estimated ink levels', I no longer get this error message. "An error (83e8e8fa) occurred this