HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

Similar Questions

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• HP psc 2410 photosmart all in one series, all of a sudden takes an hour to photocopy or print a page...

  HP psc 2000 series, model 2410 photo smart all-in-one series. Windows 7 operating system. Suddenly takes an hour for photocopying or printing. no error message. Transport print access door may have been opened during a previous print session. Power unit failure and restart and remove and reinsert the cartridges has no effect.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2410 will support printing (do not copy) with a cartridge removed in reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• How to install a scanner HP psc 2410 Photosmart all-in-one without a disc, please?

  The printer works fine but the scanner does not appear to be connected.

  Hello

  http://h10025.www1.HP.com/ewfrf/wc/product?product=303753&LC=en&cc=us&DLC=en&submit.y=4&submit.x=6&lang=en&cc=us

  the above link has information on your printer model HP psc 2410 Photosmart

  not to mention that other information to download from the link above and read the manual for it

  " How Improve your performance of product´s with details on how to use and maintain.

  Solve a problem

  Having a problem with your product? Find your solution here
   

  ' Manuals Download your product documentation and user guides

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Cannot scan HP PSC 2410 Photosmart 'all-in-one '.

  The function "scan" on my hp psc 2410 printer/scanner/copier/fax MACHINE used to work on my other computer running Windows 98 was, but I wasn't able to scan in Windows Vista.  The printer function works fine.  Is there a 'driver' that I'm missing?  Help, please!  I need to scan documents signed for my husband's business.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=au&lang=en&product=303753&

  Read the above. Re Vista drivers.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with other questions of printer in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• PROBLEM WITH THE CONFIGURATION OF THE FAX MACHINE SINCE THE EVOLUTION OF BRIGHTHOUSE - HP PSC 2410 PHOTOSMART ALL-IN-ONE

  Good afternoon... On pages 116-118 of the manual "how to choose the right Fax Setup... »,

  1] I do not have a distinctive ring

  [2] receive voice calls in the same phone # I'll use for fax calls

  [3] I have a modem from pc on the same phone line as my HP PSC.  I HOPE THAT I INTERPRET THIS RIGHT.  IS A PC MODEM THE SAME THING THAN THE PC ITSELF?  I HAVE NO SEPARATE MODEM EQUIPMENT.

  [4] I have an answering machine that responds to voice calls in the same phone number I use for fax calls - the PROBLEM SEEMS to BE THAT MY answering DEVICE IS ATTACHED to MY DIGITAL PHONE so I don't KNOW whether TO ANSWER YES OR NO to THIS QUESTION.  INSTRUCTIONS DATA FOR "CASE G" FOR VOICE/FAXLINE SHARED WITH PC MODEM AND answering MACHINE SHOWS THE RESPONSE

  DEVICE AS A SEPARATE FROM THE PHONE.

  [ 5] I do not subscribe to voicemail through my phone company

  [6] I don't have DSL

  I answered YES to questions 2, 3 and 4. Should I answer NO to question 3 or 4?  Sorry, I'm confused... Help, please...

  Depending on your region

  You may want to consider high speed

  Internet and be much faster and

  You can get updates on your computer

  HP and Microsoft and may not be

  long tied up extreme for the update

  update the file are huge

  It will be always up to date

  OK B2B

  go to the store and ask the

  phone switch

  one that you can put the fax, phone and computer

  on the same switch box

  check the amount of the adjustment ring

  and you can set the number of rings

  Good luck

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753

• 2620 HP printer all in one, is compatible with windows 8

  2620 HP printer all in one, is compatible with windows 8

  Hello Peter,.

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to know if your 2620 HP printer all in one is compatible with your machine Windows 8 or not.

  I wish to inform you that Yes, the printer is compatible with the operating system Windows 8. However, for the installation/configuration of the printer, you can install the latest drivers for your computer using below link:

  HP customer support - Software and Driver Downloads

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-2620-all-in-one-printer-series/5357283/model/5357284

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye