HP PSC 2410 Photosmart fax and scanning problem

Similar Questions

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Problem scanning HP PSC 2410 Photosmart in Windows 8

  I have a HP PSC 2410 Photosmart all in one that I can not scan.  I use a laptop Sony VAIO T series of ultrabook.

  When I push the scan button I get a message 'scan options are not defined. Install or run software of device on the computer. »

  Printer works fine.

  Dear Eric,

  Here is a document which tells you how to scan in Windows 8:

  http://support.HP.com/us-en/document/c03460648

  There is no HP software to configure the scan button.

  I hope you find it useful.

  Greetings.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Fax and scanning of Windows problems

  I can't get windows Fax and Scan to scan documents in black and white.

  I gives me the possibility of Documents, Photos and the last settings used in profile, but when I try to select the color Format, the only option I get is color (No black and white and not gray scale)

  I can't find this particular issue addressed anywhere and no resolution.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can try one of the methods is to turn off and then turn on the Windows Fax & Scan service. Doing so is like the disconnection of the existing facility and its replacement by a new. I suspect that there is something abnormal in the current installation.

  Here's how:

  Click on 'Start' ---> ' Control Panel ' ---> 'programs and features' and in the left pane, click on "Turn on or off windows features". Give time resulting from the box to complete and scrolling down to "Print and Document Services" and to extend it by clicking on the '+' sign. Uncheck the 'Windows Fax & Scan'box and click on 'OK'. Follow the prompts if necessary and wait until the course ends.

  Reverse the process by checking the box to reinstall Windows 'Fax & Scan ". Now try again to accomplish the task of setting up a new account.

  Configure your computer to send and receive faxes

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Problem with Windows Fax and Scan.

  I have a Canon MG5420 and Win7 64-bit.  All of a sudden, the Office does not see the scanner.  The print function continues to operate correctly.  Problem occurs regardless of USB or WiFi connection.  The only change in my system is a migration towards Office365.  Other than that, no change. I tried all the basics: refreshed drivers, uninstalled the printer and re-installed.  Any thoughts on what could be the cause?  I get the message error is "No. scanners were detected.  The utility Scan Canon IJ can see the scanner, but I prefer to use the Windows fax and scan.  Any ideas?

  Unfortunately his is possible because there are different drivers and stacks of driver for the printer and the component the same multifunction device installed on the client computer scanner. In a case when the right printer driver is installed and available from the scanner driver may be missing or may be incompatible with Windows Fax and Scan requires the parser must be WIA 2.0 compatible, a TWAIN compatible scanner only for example will not work with this app).

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• Problems with Microsoft fax and scan

  I use Microsoft fax and scan on a win 7 pro sp1 machine, to connect to a Microsoft Fax under windows 2012 R2 server.  Inbound faxing works ok, but for outgoing faxes, a few questions.

  on the server, I can see 4 pages of coverage.  How can I force users to use these 4 cover pages.  I thought that they show for all users in the domain, but they did not.

  When you send a fax how do I get it to look at outlook (we use office 365) for the contact database?

  for both the fax and scanning seems to be only looking on the local computer.  I'm looking for something more integrated with this solution.

  Thank you

  -Phil Lawson

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753

• PSC 2410 photosmart does not print after installation of OX 10.6 & Lion: message "failure to communicate".

  I just installed Snow Leopard and Lion (10.7.2).

  My hp psc 2410 photosmart printer repeatedly gives me the following message in the queue of the printer:

  Failure to communicate: the computer is no longer able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.

  I have deleted all the files of hp of the system library (suggested in an Apple forum), ran from the Apple software updates and recreated the printer queue in the printer preferences and Scan.

  What to do before having to run out and get another printer? Everything that I am interested is in the printing industry;

  analysis on this hp didn't happen for several OS updates.

  I appreciate the help.

  Hi again,

  I'm sorry to hear that the problem persists.

  Please, check the following:

  1. The printer is connected directly to a free port on your Mac OS and not via a Usb hub, extention, a port of Mac keyboard or through any airport base?
  2. Make sure that the cable is not more than 2-3 meters of length and directly connected to the Mac as described above.
  3. Try to switch to a different USB port on your Mac.

  If the problem continues without change, I suggest you try using another USB cable and then check for any progress.

  Although the printer worked fine with the previous Mac OS (as far as I can understand your description), any defective USB may react differently on another OS...

  Please let me know any progress,

  Shlomi

• HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

  My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

  HI JourneysLady,

  I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

  --------------------------------------------------------------------------------------------------------------------------

  Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

  ---------------------------------------------------------------------------------------------------------------------------

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• How to install a scanner HP psc 2410 Photosmart all-in-one without a disc, please?

  The printer works fine but the scanner does not appear to be connected.

  Hello

  http://h10025.www1.HP.com/ewfrf/wc/product?product=303753&LC=en&cc=us&DLC=en&submit.y=4&submit.x=6&lang=en&cc=us

  the above link has information on your printer model HP psc 2410 Photosmart

  not to mention that other information to download from the link above and read the manual for it

  " How Improve your performance of product´s with details on how to use and maintain.

  Solve a problem

  Having a problem with your product? Find your solution here
   

  ' Manuals Download your product documentation and user guides

• The link "FAX and SCAN" is not working (says no link) on my Vista Ultimate desktop.

  Hello:

  I've never used the link "FAX and SCAN" until that earlier, and it failed.  How can I fix?  I have Vista Ultimate (SP2) with all the patches and updates.  I use a gateway GT5438 desktop (with DSL, works very well) connected to a HP Photosmart C6180 all-in-one who has a FAX option.  How can I solve this problem?  Thank you.

  Fax works through the telephone system. Your HP printer may let you fax directly from the printer, if it is connected to a telephone line, you will need to consult your documentation.

  You can search electronic fax software that allows you to send a fax by downloading on a server such as efax.

  Matthew Arkin - moderator answers Windows - Microsoft Partner - Windows Desktop experience MVP - http://twitter.com/Microsoft_Cares - this forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.