HP psc 2510 photosmart driver will not work

Similar Questions

• my HP psc 2510 photosmart scanner does not work?, ayer estaba trabajando very well, cambie, no esta reconociendolo como hoy mi office

  Ayer estaba trabajando very well, hoy como cambie mi desktop, no reconociendolo esta, my HP psc 2510 photosmart scanner

  Microsoft proporciona soporte sitio en frances responses. A Uniform Resource Locator (URL) here is entirely of Quebec reciba soporte para para information known location. Abre el issues y su select region in the list desplegable y haga click in el boton para continue flecha.

  http://answers.Microsoft.com/es-ES

• I have a Dell Inspiron 1525. The player/cd-DVD drive will not work. The help section it says it is (code 10). The drivers seem to be installed. Can you help me please? Operating system is Windows Vista Home Premium

  I tried the support centre and followed their advice, but no luck yet.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Director & PSC 2510 TWAIN drivers do not work

  Hi all

  I have a PSC 2510 Photosmart AiO on my ACER Aspire 2003WLMi laptop with Windows XP Home SP3 Genuine, Office 2003 SP3 Pro, Acrobat Pro 7.1 & HP drivers 4.2.0 with all latest hotfixes and patches.

  My problem with HP Director is similar to IE7 bug was resolved a few months ago, but this time is odd. After updating my windows for the last updates November & Pro Acrobat 7.0.9 at 7.1, HP Director runs in memory without a window of the application on the screen. Pressing 'alt + space', 'minimize' & 'restore' HP Director window appears with a white screen. Attempt to analysis through the Control Panel, the scan window appears doudou, too. Digitization is able drivers from HP TWAIN workaround ony via Windows Scanner & camera wizard.

  No problem printing. Just another bug HP Director.

  Any idea?

  Message edited by GR 19/11/2008 12:04

  A month later... Problem SOLVED itself! All this time I don't have fact, or uninstall/install software HP AIO. Had no time and I was expecting than Christmas to find. Also, as I mentioned above, I was able to scan via MS Scanner & camera wizard. Now the problem SOLVED itself! By simply installing the latest patches from Microsoft IE: KB958215 & KB960714. -PS. same problem with MS Media Player 11 running in the background without window on the screen is resolved by installing the latest patches: KB955839 KB956802, KB952069 KB954600. Don't blame HP this time. Bill Gates trash sucks too.

• My photosmart m22 will not work with windows 7

  Windows 7 don't accept my photosmart M22

  Hi, due to the age of the unit photo, no drivers or software is available for Windows 7.  However what you can try, is try to connect your camera with the right cable to your pc. Once you have connected it please click the Start button on your pc then go in 'computer '. Click on 'Computer' and see if the camera is listed as an extra hard drive. If it is you can click on it and extract your photos with the use of any software.

  If by chance it does not work please let me know and I'll be happy to try more options right here.  I can't ensure that the steps I gave you works but I had a similar problem, and it worked for me.

  Thank you

  Waterboy71

• RAID DRIVE WILL NOT WORK IN THE MEDIA LINK BROWSER

  I have a RAID 5 drive connected to my MACPRO (MacPro5, 1), OSX 10.9.2. His work correctly on the BONE. In first Pro CC I can import files from it no problem, everything seems to go well until I try to link the media about him. The link media browser will not access it. I can see it, I can see the icon of RAID, but it will not access the files.

  Media link Explorer it will not appear on the list of the local drives on the left pane. When I double click on local hard disks, on the right pane, I can see the RAID HD icon, but when I click on it it won't open it. He knows its there, but can't access it. I don't understand. I can import files, etc., but not to link the files. I have to redo the entire sequence with the files of this RAID drive and its working days.

  I'd appreciate a lot of help with this problem.

  After moving all about the RAID I completely erased the disc.

  I reformatted it and moved all the data on it.

  Now, it seems to work.

  Not a good solution (because I do not know if the problem will resurface for a reason any)- but at least it's working.

  Here at least I know to test the new drive with the media browser before copying tons of data on it.

• Smart Pavilion Touch 14-n056sa: Touro Hitachi 500 GB portable drive will not work on Win 10

  Before I updated to win 8 to 10 to win my Hitachi 500 GB portable hard drive did Touro worked to make a backup of. Now, it won't. It shows in the Device Manager and in the backup and support (windows 7) in the Panel, but in the latter there is a red x against it and "Save now" is grayed out. It won't work at all. Is there a way I can get to work rather than buy a new one?

  Hi Visruth - for a period of time you were kind enough to help me with my portable player that wouldn't work after that I downloaded Windows 10. I have no joy in time, but in the latest edition of number Computeractive 475 11 to May 24 to 70 page there are instructions that worked for me.

  1) click Start, type diskmgmt and press enter

  Sheet 2) in the portable player and take note of its name

  Law 3) click on the white space beside where the Portable Player is listed on the bottom of the screen

  4) click New Simple Volume to open the wizard

  (5) for the opening of the wizard, click on next again, and then click Next and choose a drive letter from the drop-down list, then click Next

  (6) select "Format this volume with the following settings.

  (7) select NTFS in the 'File system' drop ' then by default from the "Size of Allocation uniy" dropdown and select "perform a quick format.

  8) click on 'Next' and then 'Finish' to format the partion

  Once the player has completed must appear in the file Explorer.

  Hope this helps some other folk and thanks once more.

  Can you recommend ComputerActive - they publish no end of useful tips.

  Longfella

• Floppy drives will not work in remote desktop

  I installed RD on two XP PRO machines, and when I click on the diskette icon I get a BSOD, STOP 000000F7. The disks worked OK before the installation of RD.
  I removed the RD Software and readers don't always work, but they do not work in safe mode.
  I have uninstalled/reinstalled the floppy went and they still do not work.

  Hello gene R.

  Thank you for visiting the Microsoft answers community.

  You should be able to determine the cause of your problem by following the instructions in the KB. Read the article, he has the advanced troubleshooting steps to help you determine what hardware or software driver is in conflict.
  How to solve problems of hardware and software drivers Windows XP

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart 6510 will not work wireless

  I just got a new 6510 Photosmart e - all in one printer which works wireless.

  I have a macbook pro, which is update 10.7.2 (I think I'm in maybe 1 or 2). anyway I'm on Lion

  I noticed when I opened my printer it had a slip that says: if I lion, do not use the installation disc that comes with it, but to use the one online, so I did.

  I had to connect my printer via the usb port on my computer because after switch on and its connection to the wifi in my house and enter my password and connect and have even tell that I am connected to the network, it wouldn't show if I tried to print from my laptop which is connected to the same wifi or my iphone 4 which is connected to my wifi.

  so after I connected with a USB and installed all the software and setting up to print wirelessly, for the instructions it tells me to unplug the usb cable (after that he told me that the printer is ready for wireless printing and it is connected and the printer is installed on the computer and everything). If I unplug the USB stick and then he says that he cannot find the printer. It is said to make sure that my printer is connected to a network connection and my computer is connected to the same connection and click on 'Retry '.  they are both connected to the same wifi at my house, and it continues to make me press 'Retry '.

  even research on my printer, on the screen, if I go into the wifi settings, it says that it is connected to the wifi in my house.

  my computer is connected to the same wifi and wifi doesn't work, because I am able to be online.

  I tried to do all troubleshooting HP provided on their website, and I have uninstalled and reinstalled the printer about 4 times. I stayed until 03:00 last night working on this and still cannot get to work.

  If someone could help me here please. I'm one step away from taking a day off, so I can call HP and tell them on the phone about it but I don't know who will be an event of the day.

  When I have the printer connected via usb it works perfectly fine. everything works. but the second I unplug, I can't find it on my computer and I can't find it on my iphone 4. my computer is connected to the wifi but my printer says that it is connected to wifi (I even unplugged the wifi printer and reconnected several times to ensure that I was connected and I am).

  Hi bradywurtz,

  If you open the preferences system - Print & Scan, the printer has a host name in brackets behind the name of the printer (for example: HP Photosmart 6510 all-in-one [G53D42])?

  If this isn't the case, then the printer in the print queue is for a USB connection, and all what you need to do is:
  1 remove the inscription of the USB
  2. click on the '+' to the bottom of the list (the white box where the printer was included)
  3. find your 6510 (connection type should be Hello)
  4. Click to select your printer, and then click Add.

  Given that you have plugged in USB and downloaded the drivers, you must have the latest drivers - but just to be sure, it would not hurt to run the software update and check and updates of HP driver Bundle (the last being 2.8).

  Please let me know if this does not solve the problem and I'll work with you more on this.

  Thank you!

• My documents mapped network drive will not work...

  Hello world

  Here is the problem I am facing lately...
  I have a Win2008 R2 Server with some shared folders... Now on my Win 7 PC, I did the following...
  Mapped to a network drive on cmd as: net use x: \\server\folder
  Next: I have changed my location tab the folder My Documents (My Documents C:\Users\Current) the path to X:\ and recorded...
  After that, I went back to cmd and removed the mapped drive: net use /y /d X:
  FYI: I have a kind of software that maps the letter x: on my win7 pc whenever I connect to him so he can accesed from different people. 200% working...
  I created a new user to the server, so the \\seerver\folder will be shared and accessible only from this user...
  Results: Location on my documents tab not shown... redirect works DO NOT... the files are now saved @ C:\ and not C:\users\current my documents
  Any suggestions...?
  Thanks in advance!

  Hello

  The question you posted would be better suited in the Server Support. I suggest you send the link.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
  Hope this information helps you.

• "Auto" on the drive will not work

  I have Vista Home Premium.I to run a program with the suffix. FTL it must operate automatically, but does not and I get a message that the. FTL program has stopped working.

  I get another message that "the component you are trying to use is on a CD-ROM or another removable disk that is not available."  Then: Put the 'Microsoft Office XP Professional with FrontPage' disk and click OK.

  I do not have this disc, and why should I when the computer is running on VISTA?

  During my attempts to solve this problem, I also have the following:-Windows Update, error 8024002d

  Where I'm going wrong?

  What software is missing?

  What can I do to play the disc with the. Detail FTL?

  Please explain in WORDS SIMPLE.

  I have Vista Home Premium.I to run a program with the suffix. FTL it must operate automatically, but does not and I get a message that the. FTL program has stopped working.

  I get another message that "the component you are trying to use is on a CD-ROM or another removable disk that is not available."  Then: Put the 'Microsoft Office XP Professional with FrontPage' disk and click OK.

  I do not have this disc, and why should I when the computer is running on VISTA?

  During my attempts to solve this problem, I also have the following:-Windows Update, error 8024002d

  Where I'm going wrong?

  What software is missing?

  What can I do to play the disc with the. Detail FTL?

  Please explain in WORDS SIMPLE.

  Hey Peter to Waterlooville

   
  Why don't post it the name of the program to get help
  and it asks for OFFICE xp professional not the xp operating system disk drive
  and for the extension of file FTL information read the Sub page of google to find out what it opens
  http://www.google.com/search?hl=en&source=HP&q=.FTL+file+extension&AQ=0c&aqi=g-c1g-S1&AQL=&OQ=.FTL+extension&gs_rfai=
  I suggest tha tyou repost in the correct vista programs forum
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
  for the repost of problems of updating in the link below
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Installing the L7680 driver will not work with Windows 8.1

  I recently bought a new HP Pavilion laptop and updated to 8.1 windows not long after the purchase.  I tried to install my Officejet Pro L7680 all-in-one today and not failed on each attempt.  The driver/software will download but when I try to install the software I get a message of "specified file not found."  I called HP and spoke to a representative who informed me that my printer was too old and that it was not compatible with Windows 8.1 System.  He said there was no update available for my printer and basically I have to buy a new printer.  Wrong answer!

  The issue is a file missing in the folder drivers to preload: Msiexec.exe

  Please help me find a way to install my printer

  Hi exumsta

  Yes the anitivirus software could ask questions.

  I'll make sure that it is turned off during installation.

  Here is a url to temporarily disable all the startup programs to see if one of them is causing problems.
  http://theunlockr.com/2012/04/05/How-to-change-Windows-8s-startup-programs/

  You must follow the same steps to reactivate all.

  Let me know how it goes.

• HP 250 g4: Hp 250 g4 driver will not work

  Hi, I have a problem with my wireless driver, it says that it is working properly, but when I was traing
  to install an appired Update.cpp 1205 error, then it leave instalation. A Wi - fi connection have a very weak signal that he lose this network any minute. I tried to reinstall, but the same thing happens again?

  Hello:

  I can't access the site of business support.  See if this driver works...

  The package contains the Broadcom Wireless LAN driver for the laptop models running a supported operating system. Broadcom wireless LAN driver is necessary to allow the built-in Broadcom wireless LAN adapter.

  File name: sp72927.exe

• C5580 driver will not work with Windows 7.

  C5580 printer all-in-one. Pro Windows 7 64-bit OS, can't scan from my computer, when I try to install the printer driver I get a message that my system does not meet the requirements. Have a new Lenovo computer and upgraded to Windows 7 from Vista. None of the programs assistant HP have been transferred to my new computer.

  ARG274,

  I'm sorry the question was so embarrassing for you, but glad to hear that you are facing up and running. Please let us know as soon as possible if you encounter other problems, Best of Luck!

• Old HP P1100 printer will not work with Vist, which driver do I?

  After you have reinstalled my Vista OS, the old HP Photosmart P1100 printer will not work.  Should which driver I?

  That is very good news. What set of drivers that you finally end up using?