HP QuickTouch screen has stoped working
HP QuickTouch screen has stoped working
Have you checked Support HP?
http://WWW8.HP.com/us/en/support-drivers.html
Tags: Windows
Similar Questions
-
Bluetooth in satellite C660-10V has stoped working
Hi, my bluetooth has stoped working for a week.
Time I changed my internet modem rather USB adapter, I can't reactivate my bluetooth.
On my screen is the message of our Lady: "interface power supply is cut off.
Its imposible to turn it on, by the function key + F8 does not work 'Bluetooth Wizard.
In a Deputy bluetooth option is shown 00:00:00:00:00:00 to address equipment.Please help me with this problem.
MarcinWhen you use the key combination FN + F8 is BT option available or not?
If so, what happen when you try to activate the BT?To be honest I don t understand what you did exactly.
-
Equium A60 freezes - driver graphics card has stoped working
Hello everyone, my A60 keeps freezing and a message appears saying that the ATI driver has stoped working properly it causes the screen to go really big and have a very low resolution. When I turn it on a blue error message and I have to put in safe mode so that it works, Ive downloaded the ATI driver and who is not worked, Ive used the recovery disc to clear everything and start over, but that is not worked,
any1 has any other ideas? THANKS FOR YOUR HELP EVERYONE
Marc
Post edited by: marcisaacs
Hello
You should not use the ATI graphics driver because this driver is not designed for the use of the laptop. Toshiba recommends to use own graphics drivers because these drivers are specially designed for the use of the laptop.
However, after getting the procedure books should work properly. If the failure occurs after this procedure again so I guess it must be something wrong with the hardware (graphics chip)
I don t think you will be able to solve this problem yourself.
In this case, you must contact the Toshiba ASP. -
Internal mic has stoped working
The internal mic on my computer laptop HP Pavilion touchsmart has stoped working. Nobody can hear me on Skype and I can't make recordings on other programs, so I know its not only Skype. How can I get that back?
It is the newest audio driver custom for your combination of model and the operating system for laptop. You can download this (which will begin when you click on the link) and then uninstall your current driver, reboot the system, and then install the downloaded driver.
Driver Audio of IDT high definition (HD)
The link I gave you, for the resolution of the problems of micro there a difference?
-
U920T satellite screen has stopped working
The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.
Any help in this matter would be appreciated.
> It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.
This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.
Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
If the warranty is valid, the laptop must be repaired for free.Welcome them
-
Skype has stoped working error
every time I start Skype after 3 seconds it come with one Skype has stoped working error and stops at Skype.
Please help solve.
Name of the failing application: Skype.exe, version: 7.6.0.105, time stamp: 0x559165ab
The failed module name: ntdll.dll, version: 6.1.7601.18869, time stamp: 0 x 55636317
Exception code: 0xc0000005DxDiag crashed into Direct3D:
DxDiag previously: crashed to Direct3D (step 2). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information
The problem with the installation of the driver ATI Mobility Radeon HD 5470. Reinstall this driver:
https://www.Sony.co.UK/support/en/content/CNT-DWNL/PRD-comp/EP0000230054_5505/VPCEC2S0E
Search other updates of the driver available too:
https://www.Sony.co.UK/support/en/content/CNT-DWNL/VPCEC2S0E/list#OS1
It may also be necessary to uninstall the applications of virtual video capture ManyCam and Dxtory.
-
Satellite A100 - screen has stopped working
Hello
yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...
The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.
This has me worried and I reinstalled vista from the cd, but now the screen never... never.
But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
Does anyone have experience with this?Hello
I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
Did you ever done some update the BIOS on this machine?Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):
Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.
If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).
You can also try some update BIOS if it is not already done...
Welcome them
-
The touchpad scrolling has stoped working on satellite
The touchpad scrolling has stoped working.
I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.
And what satellite you have? Is - this new model of notebook with touchpad buttons?
-
I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.
Concerning
P. J.
Hello
1 did you change on your computer?
I suggest you to follow the links and check out them.
Method 1:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to contact Lexmark printer and check.
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US
-
I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :( (I have windows vista & pentium bicoeur.)
This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.
If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.
-
original title: my computer tells me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?
This happens often when I look at the videos on YouTube
Hello LightningPurple,
This problem may occur if the display on your computer driver does not work. I suggest that you update the drivers for your video card and check if you have the same problem. You can see the underside of section which will give you information on how to update the drivers:
Thank you
Irfan H, Engineer Support Microsoft Answers. -
msexch4032.exe has stoped working
msexch4032.exe has stoped working
Crashes IE and FF all the time.
TX for all people of the aid: to correct the issie I had to reset the router and things are back to normal.
-
R300 display driver has stoped working, but has recovered.
My computer keeps telling me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?
Have you recently updated your drivers, possibly through msupdate?
If so, or in any case, your site of PC makers, specific to your model and updating your graphic driver
-
Audio has stoped working
Hello
Try the following.
Download the installer of IDT Audio relevant links below and save it in your downloads folder.
IDT Audio Installer - Windows 7.
IDT Audio Installer - Windows 8.
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you're done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
Hello
whenever I start my laptop it keep telling me "Giraud has stoped working". ". Please how do I rectify this?
You must enter the Windows features and disable Microsoft .net Framework 3.5.1, and then restart the machine and turn it back on again for a new installation.
Click Start or press the Windows key and type features but do not hit Enter. Find Windows turn on or off features in the list above and click on it. Once the Windows features dialog box opens and fills itself (may take a few seconds), search for Microsoft .net Framework 3.5.1 and uncheck the box. Click OK in the lower left corner and leave the machine to uninstall this package.
Restart the computer and go back to the Windows features dialog box, where you turn you Microsoft .net Framework 3.5.1 . Your Giraud errors should stop appearing.
Maybe you are looking for
-
Chrome browser adwares / malwares? Cannot close the window
HelloI'm trying to help my mother to troubleshoot remotely. She has a Mac Mini running El Capitan 10.11 and she seems to have some sort of malicious infection? I enclose a photo of its Chrome browser window - she can't close Chrome and if she did a
-
original title: msn games I get "other players left the game" when I quick match failures. It says to click "replay" and select "Quick Match".When I do this it shows once again "all other players left the game". It doesn't let me play Backgammon or h
-
e-mail connection problems When I try ti sign in is blindly. Most of the time I get error 103 (net connection error-abandoned) unknown error, why this is happening and what can do about it
-
Retrieve deleted VM Workstation
HelloPressed to clean up a partition for the space, I was able to remove a vmware VM which is very important for my kids and i. (very bad by me )I'm using vmware workstation 8.I used "Recover My Files" and retrieved what looks like the missing files
-
Al descargar Lightroom (package of Photoshop + Lightroom x $4,99 / my) me that none appears to you can download completely y vuelva a intentarlo.An alguien ha pasado esto? What means U44M1l210?