HP Scanjet 2200c

Similar Questions

• Explains how to install hp scanjet 2200c

  explain how installhp scannjet 2200c scanner

  Do not connect the scanner to the computer.  Insert the CD that came with the scanner to your computer and follow the prompts.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=28415&prodTypeId=15179&prodSeriesId=28415&ObjectID=bps05564

• ScanJet 2200C

  Scanner came with the computer of origin in 2001.  Have new (2003) computer now.  Need the program or drivers make scanner works.  Anyone know if it is still available somewhere?  HP without help.  With the exception of a fellow in Calif who advised me to just it undesirable and buy a new one.  Too old said.  Help please.  I prefer to get it to work if possible.  If not, part B, "What would be a reasonable substitute?"  Sought at all in one at Walmart.  Not bad, but I just got rid of one.  The glass is broken, and I tore it to try to get the glass out to replace.  (DON'T EVEN ASK!)  First time here, so any help appreciated... RonTee...

  Drivers for this scanner are found here:

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=28416

  Just select the operating system for your computer in 2003 (I guess than XP for this year) and download it.

• hp scanjet 2200c, but it does not work with vista

  I was on the hp Web site to look for driver, I found it but the windows vista is not listed, what I can do... I asked the forum there, but no one will help...

  Read very carefully through this link.  Just follow the General logic of the messages. Your need to follow step by step.

  http://www.Vistax64.com/Vista-print-fax-scan/98502-using-XP-printer-driver-not-vistas.html

• How to use a scanjet 2200c with a pc using the Vista operating system?

  Without a positive response, I can't continue to use my scanner because it is not my intention to give up on Vista operating system. At least for the moment. Thank you. Bye bye

  Sorry to say this, but it seems that your product is not supported by Windows Vista. See the document below for more information.

  http://support.HP.com/us-en/document/c01296655

• HP Scanjet 2200 C Windows 7 compatibility

  Recently, it has been installed on W - 7 (Lenovo Notbook 64 bit) sj646sp exe that contains HP 2200 C drivers previously changed properties on the following archives, wiew compatibilities with Vista-2:

  hpgreg.exe
  hpipcopy.exe
  hppsapp.exe
  hpsjrreg.exe
  Pietro.exe
  regipe.exe
  sendAOL.exe
  sendMapi.exe
  SendTo.exe.

  The O.S. W - 7 can't find material that has been recognized by vuex6492 Finally I uninstalled because the irrumption of the author's Office and asked to purchase a full version of it, the text that appears on the scanned image.

  As an XP user, I haven't had any problems with this material.

  Thank you for your attention and advice.

  Hi Luis,.

  You receive messages or error codes?

  It seems that the HP Scanjet 2200 C is not fully compatible with Windows 7.

  There is no Windows 7 drivers for this model.

  For more information, see the article:

  Drivers for Scanner HP Scanjet 2200c & downloads

  You can try to install Windows XP for HP Scanjet 2200 C drivers in Windows 7 computer by using the Windows XP compatibility mode and check if it helps.

  For more information, see the article:

  Make older programs in this version of Windows

  If the problem persists, you can also get in touch with HP support for help.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• error code 2718 at system startup

  Original title: error code 2718

  I tried to install a HP scanjet 2200c scanner and couldn't make it work. I then uninstalled! Now, when I turn on the computer, I get an error message 2718! It is annoying and would like to know how to solve this problem!

  Hi Boltman619,

  Try these steps and check the result.
  Step 1: Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
  MSIExec /Unregister
  MSIExec/regserver
  c. start the computer and check the difference.

  Step 2: If the problem continues, check if this error is associated with linked any program currently running on the computer. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I install my old hp scanjet 2400 driver

  I have not find a driver for my old HP scanjet 2400 driver. Help, please.

  You can download the drivers and software here:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=297430

  install the drivers according to the instructions on the site.

• hp scanjet 3800 no power

  I write in the right section?  I'm not sure. The site is really complicated and not easy to deal with.

  I have my scanjet hp model 3800, it used to work until suddenly collapsed for unknown reasons.

  my attempts: I connect it to a power source (I tried a few different), but it does nothing to show me that his life, is not even a light... nothing.

  My guess is that something is worng with the power to control device inside the scanner (any ), maybe it burned to the top for some reason any.

  now, what should I do?

  Serial number of the product if necessary: CN764A15CM

  P.S. This thread was moved to HP Service Manager / Service Center Support and Forum of News for Scanners - HP moderator of the Forum

  Hello

  This forum is in fact related to the software.

  Looking for information on a Scanner then please look in the following forum:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Could be a problem of supply of power on this thread:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/lost-my-power-supply-what-voltage-do-i-need-HP-ScanJet-3800/m-p/797399#M18182

  Kind regards

  Alex

• ScanJet g4050 not compatible with El Capitan

  ScanJet g4050 no longer works with El Capitan. I have iMac and on the update of OS X 10.11 the scanner stopped communicating with the computer.

  Any suggestions?

  Finally, I contacted HP.  They are aware of the problem. They said they no longer support scanjet G4050. However, they recommend a third-party software that can be downloaded on the net. BUT you will have to pay the money.

  That's what they said:

  The solution that we recommend is VueScan. http://www.Hamrick.com/VueScan/hp_scanjet_g4050.html

  If you pay 80 USD for the software of theVueScan get the scammer as he was running, or buy a new scanner.

  This is the case!

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• HP Scanjet 4300C compatibility with Windows 7

  I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

  In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

  I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

  Hope you can help me.

  TNX

  Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

  Here are the directions:

  1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.
  
  2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
  Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.
  
  3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.
  
  4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

  5 restart your computer.

  6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.
  
  The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

  My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.

• HP Scanjet G4010 Windows 7 software problem

  I recently updated my computer to Windows 7 and installed the latest drivers and software for my old scanjet G4010.  It will scan using the button on the scanner, but I can't adjust scanning settings (picture of quality, where the harvest, etc.).

  BUT the scanner software does not work. This brings me through the installer without any problems until it reaches the actual scan wick. By clicking on finish, there is no process of scanning, and nothing is recorded. Have you tried several places, but... nothing.  Not in a satisfactory way, such that it has reduced what was a versatile workhorse to a silent photocopier.

  Is there a solution?

  Hi Paul2001,

  I understand that since the upgrade your OS to Windows 7, you are no longer able to use the scanning software.

  I would like that you start here: 'No. Scan Options' or "scan settings are not defined", that will guide you through the troubleshooting steps and also the possible solutions.

  I would like to know if it was useful, if you have more questions please let me know.

  Thank you

• HP Photosmart software for scanner Scanjet G4010

  I upgraded my computer to an HP Pavilion with Windows 7 64-bit OS.  I have a disc for the HP Photosmart software for my Scanjet G4010 but it is Version 9.0 for Windows Vista.  Where can I get a copy of this set of programs for Windows 7 that I can install it.

  Hello RichardM02

  The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.
  
  You will find the Board Commercial Scanner here.
  http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418