HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

Similar Questions

• HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

  Hello

  I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

  Thank you.

  Hi @SushmitMazumdar ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Win 7 64 bit HP recovery CD does not work

  Hi all

  I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.

  When it separates partitions, and it displays its progress as usual for example

  1/7 full
  2/7 full
  3/7 full (files copied etc..)

  but around 3/7 or 4/7, the sound of the CD in road changes and it seems that it restarts continually.

  I am confident that the problem is related to this CD because the other disks work properly and the 32-bit recovery CD, I had with laptop computer reinstalled Windows very well.

  I wonder what could happen? I have contacted the company on this topic and am waiting to hear. I see no damage to the evidence on the record, and I take great care in general. All I know is it does not work. Any ideas?

  Thank you

  > I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.
  What do you want with a HP recovery disk?
  If you have a Toshiba laptop, then you must use a recovery disk Toshiba

• Portege R700 - Windows 7 32-bit - NETWORK adapter driver does not work.

  Hi all

  I rebuilt a Portege R700 with Windows 7 32-bit o/s. I downloaded the drivers from the Toshiba site but could not get the only rider listed working card. It seems to install ok but will not work. If I try to 'put to date pilot' with Device Manager and point to the files expanded, he said that the required software is not found.

  Is there a driver that works and can someone tell me where it is please?

  Concerning

  Dave

  > No idea what driver NETWORK card works and also which driver, I need for the controller PCI of communication Simple?

  This seems to be the controller of Intel AMT.
  You can download the driver form Intel page.
  Search for Intel AMT or check this link to the page of the Toshiba driver:

  [Intel Management Engine Interface | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1019 & language = 13 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 75561 & OSI D = 29 & driverLanguage = 42]

• Wolf 3D and SoD does not work on Windows7 32 bit but it does in Windows XP?

  I have already downloaded versions freeware and shareware of best games in existence! (Wolf3D and Spear of Destiny, nested DOS, original version) In Windows XP, it worked well, all I get under Windows 7 Home Premium 32 bit is a black window feared, blinking icon and the opportunity to do nothing but close the window!

  I tried to run the application in compatibility mode with previous versions of Windows (including Windows 95!) But Windows 7 is so automatic that I can't change any settings.

  Not much of a computer geek, but Microsoft seem to think that something before 2007 is not worth worrying about

  Can anyone help?

  Hello littleoldme.

  I would suggest running DOS games in a BACK emulator like DOSBox http://www.dosbox.com/, Windows did not have a good DOS since Windows 98 mode. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Win7 64 bit freezes & arrow function does not work, do not click to navigate anywhere

  Win7 64 bit PC crashes & arrow function does not work, do not click to navigate anywhere, exceptionally after being on ~ 2 + hrs. I can only turn off by pressing the power switch for about 5 seconds.

  Hello

  You did changes to the computer before the show?
  
  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:  If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Also provide an observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Hi, I installed a set of creative cloud including Adobe Acrobat Pro (64-bit Windows)... does not work

  I have a Windows 64 bit HP laptop that I removed and installed several times a CC package which includes PS, Illinois, LR, InD and Adobe Acrobat Pro.   Everything installs fine and works fine except for

  Adobe Acrobat Pro. For somereason it says it is installed but it does not appear when I try to find it.   In the programs, it shows as installed but it does not appear with the appropriate icon of Adobe.   It's as if there is a problem of copatibility.  Ideas?

  Hello

  I have corrected the problem.   Apparently with the subscription of creative cloud the

  Adobe Acrobat Pro installs the same way other products

  install.  Once downloaded the package you have to go the

  'Exceptions' folder which is part of the generation and install it then

  it.

  Thank you

  Ellen

  Friday, February 27, 2015 at 10:31, screen name of Test [email protected]

• Re: Qosmio F50 and Vista 64-bit - touchscreen and fingerprints do not work

  Good day everyone,

  I just installed Vista 64-bit on Qosmio F50 (reinstalled vista 32-bit) I downloaded the driver from the Web from Toshiba site but who have still two functions does not!
  The first is the touch panel works do not at all and the second finger printing system...
  Can someone help me solve...

  Concerning

  It is not easy to say what the problem is here, but I assume that you forgot to install something or you have installed something in the order of poor facilities. If you need the right one let us know.
  I can see on Toshiba download page fingerprint software and touchpad drivers are available. If touchpad doesn t work not at all may be turned off. Check with the FN + F9 key combination.

  What touchpad driver, you have installed?
  Software fingerprint AuthenTec is installed too? can you start and save your fingerprint?

• Install windows xp pro 32-bit on pc that is already running Windows XP pro 64 bit. Product key does not work

  I have a windows xp pro 64 - bit PC. I would like to install windows xp pro sp3 32-bit. This is a PC that was used in our Engineering Department and now will be sent to a standard user in our society. I went through the installation and when I enter the product key on the COA label a message that is not valid. Do I need a different product key to install the 32-bit version of XP?

  A Windows XP 64-bit product key will not work with Windows XP 32-bit installation media.  You would need a genuine Windows XP 32 - bit product key. Carey Frisch

• Windows 7 64 bit, Windows Media Center does not work

  After you activate Windows Home Server media sharing, I went to my 64 bit Windows 7 machines and tried to launch Windows Media Center.  After you run through the configuration of the connector of WMC, reboot, and then clicking Windows Media Center, I get:

  "Windows Media Center has stopped working".

  He said that it is looking for a solution, but after a few seconds, he goes and does not return.

  I never have a chance to fix anything, or even see if it connects or not.

  Any ideas?

  Hello
  Reinstall the WMC and should resolve in most cases.
  1 open the control panel-> programs and features.
  2. click on Turn Windows features on or off in the left pane.
  3 expand the multimedia functionality, turn off Windows Media Center. Click Yes to continue, and then click OK to exit. Then restart.
  4. open features Turn Windows turn on or off again. Functionality in Windows Media Center. Restart the computer.
   
  5. launch Windows Media Center, initialize the program.
  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• a 16 bit saved TIFF file does not work in ImageJ

  Hello

  I have a camera that records a 12-bit TIFF file.  When I have a saved TIFF file, it can be opened in ImageJ and all pixel values are preserved.  Also, if I display in Labview using IMAQ, it can be displayed properly and if I use ImageToArray, all values are correct too.  However, if I save it in a new file using written IMAQ 2 file, the saved file can be loaded in Labview with the correct pixel values, however, if I open this file saved in ImageJ, all the values are converted to 16 - bit wrongly.  For example, the value 62 (00111110) becomes 1000000000111110.  Apparently, the first figure when converted to 16-bit, it designates the first bit to 1 instead of 0.  I'm confused because the same saved when the image loaded into labview vi, the value is 62.

  Is it possible to fix it?  Could this be a problem with ImageJ instead of labview? I joined the original file and save the file here.

  Greetings, Charles;

  After looking at the attached screenshot, I have a question for you. Which is currently connected to the IMAQ Create for Source2? I guess it is an enumeration with I16 selected, correct?

  The same thing happens if you use U16 times on LabVIEW and ImageJ, or any lower bit depth? Finally, if you save the image to a different file format, you get similar behavior?

  Best regards;

  Simon P.

• Laptop computer 64-bit Windows Logo key does not work do not

  We have a HP Pavilion dv7 laptop, worm service 6.1 Pentium i5 running Windows 7 Home Premium 64-bit 1-pack. It's about a year. Pressed, the widows logo key will bring up the start menu, as it is supposed to. However, * any * of the other through the working key WinLogo. We have checked the forum here, but I can't find anything that seemed to place there. There is no "Game Mode" button that we can find. The most promising suggestion a subject entering RegEdt32 na not happen because we saw not just the things that we needed to find! (User error following the signs?)

  To add insult to injury, our other HP laptop? Everything works very well.

  Any suggestions?

  Bryan

  Hi Bryan,.

  On most HP, it is necessary press the function (fn) key while pressing one of the f1 through f12 keys to activate the default features.

  FN key run frequently used system functions when you press on in combination with a function key or the

  ESC key.

  I suggest you to check the manual of the laptop for the combination used for the fn keys to work.

  If the problem still persists, you may need to contact HP

  It will be useful.