HP Simplepass and validity sensor Versions

Similar Questions

• validity sensor driver (VFS201) - later than version 4.03.340 (2010) does not work

  Details of the system - HP pavilion DV4 1318tu. purchased in 2009

  product no. - vb619pa #acj.

  BIOS - f. 67 updated (2010)

  Operating system - windows 7 Professional 32-bit SP1.

  The model of fingerprint - VFS201, hardware - USB\VID_138A & PID_0001 & REV_0372 finger Id.

  Currently use pilot - validity sensor WBF VFS (201) version 4.03.340 (2010) downloaded from the website of validity of sensor, works fine on the old digital persona 4.11

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  problem is I want to use HP simplePass 5.4.0.620 but I need new driver, I downloaded the new validity sensors

  version of the driver, 4.3.205, 4.3.304 (2012) and a similar version also from the HP site and installed each by removing completely all the driver and software, but the driver is not installed, because in Device Manager, they are not displayed as a biometric device... no errors appear.

  in fact to let me know what are VFS201 and WBF, new software / driver is available for my system?

  then do me know also what is the problem, and, is my system does not support or driver is unavailable or correct?

  If driver or any other s/w is availabe guide me...

  This helped me to solve the prb to vfs201 on hopes of winning 8 he made en you too

  http://Stanley.thepharmacopedia.com/2012/12/07/validity-fingerprint-sensor-driver-Windows-8-Windows-7/

• Envy of HP dv6 7210TX: Validity Sensor does not not on windows 10

  I recently installed windows 10 and downloaded the validity on the site sensor but the sensor does not, what may be the problem and how to solve?

  @faisalabir

  Although there is not a Windows 10 validity driver for your system, Windows 8 driver can work.

  sp58900 validity sensor V4.4.234.0 W8 - W8.1

  To use the program SimplePass, know that before, you can do if you need complete a few items:

  Implementation / assign a PIN code in settings PC as if you are going to use Windows Hello.  The PIN code is necessary, regardless of whether you actually 'Hello' - requirement for the PIN code is an additional security that Windows has put in place.

  Without taking into account Simplepass, you want to get the native Windows logon work of fingerprints - while the Windows logon provides access to Web sites, it does not support connecting to your computer.

  Once arrived at the point where you're ready for SimplePass, you want to use the latest version of the program in the respective series.

  There are two different flavors of SimplePass:

  • Windows 7 through Windows 10: series 6 HP SimplePass V6.0.100.276 (AuthenTec)
  • Windows 7-Windows 10: series 8 HP SimplePass V8.01.46A and upward (Softex)

  These "flavors" are programs separated; You cannot 'upgrade' of series 6 to 8 sets - you can change the program from one genre to the other, that is, remove one and install on the other.

  -------------------------------------------------------------------------

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Article (s):

  • Order of events is important
  • Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Need help with validity sensors, drivers works... software?

  I bought a HP Pavilion dv6tse-3000 Select Edition laptop PC in August of this year, and it came with Windows 7 Home Premium. I started school in September and got a licensed copy (true of course) of Windows 7 Professional edition (the one that comes with a remote server through VPN), and finally I had just enough time on a weekend open to install it.

  Thing is, which is the edition that my school licensing is NOT a version upgrade, rather a full version requiring a clean wipe of my HARD drive. Anyway, this led to erase me my disc to install, leaving the drivers must be reinstalled.

  So I reinstalled all the off-site Internet HP specialized for my computer and my copy of Windows 7 64 bit, and everything is pretty much in working condition and return to the same except for two things...

  The first would be Smart Menu of HP I think as they call it, mainly the small poster that come on the screen when you press the hardware buttons like volume up/down or mute, etc. That isn't really a huge problem, but if someone knows how to get back them please share

  The biggest problem is the validity sensors/finger printer scanner that my laptop is equipped. I installed the latest drivers from the HP site, and it seems as if they installed smoothly, they appear in my add/remove program Panel and Device Manager shows that it works, but the problem is how I use it now? I used to scan my finger to simply log into Windows and unlock my account instead of using a password and scan on websites that require log ins, but this Panel is now gone!

  HOW CAN I GET THAT BACK?

  Thank you

  You can download HP SimplePass from here ftp://ftp.hp.com/pub/softpaq/sp50001-50500/sp50048.exe

• Example: Pavilion dv6-6148nr: validity sensor (wbf) (pid = 0018)

  I just installed win7, 32-bit and my biometric scanner does not work (validity sensor are not registered) is what I always get. I tried all means but still does not. The Hp Pavilion dv6-6148 nr Entertainment PC. I need help to fix it. Please help me to solve this

  Hello:

  Have you installed the software driver and security of fingerprint sensor?

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56169.exe

  This package contains the software HP SimplePass Identity Protection 2011 for the notebook models and operating systems. This software protects the identity information and account access using fingerprint of the owner of the computer.

  File name: sp61399.exe

• Validity sensor drivers install correctly

  Hello

  Im having problems with validity sensor drivers. It seems do not install correctly.

  I have installed HP simple pass and works, I also tried to install the drivers of validity (of the driver HP store) sensor but it appaears never install correctly since then it does not work. When I go into the biometric devices in Control Panel, it says that there is no biometric device installed on the computer.

  In my manager of devices, each show of pilots as it has been installed.

  I have a HP Envy 15-k067nz with Windows Seven (64-bit) is installed. Except pilots sensor validity, all other drivers work without problem.

  Originally it was 8.1 of Windows installed on it with validity sensor drivers working on it.

  I also tried to install the version of 8.1 windows in compatibility mode drivers, which did not work.

  IM off the idea on how to solve this problem, so some advice and assistance are welcome

  Big names in the Jordan

  Relocation of all the operating system Windows 7 and then by installing solved my problem of usb controller usb controller drivers. Now, it works quite ok.

  Validity sensor driver, it still does not work, then I had an abortion and I do not use it, is not very binding.

  Thanks for your help,

  Jordan

• DigitalPersona validity sensor Windows 7 x 64 service pack 1

  Here is the version of the installed driver and software:

  DigitalPersona personal version 4.11.3826
  the wfs301 validity sensors (wbf) driver version: 4.5.235.0

   

  everything worked fine but now keeps saying drive not detected.can anyone advise please?
  

  Thank you
  

   

   

  in fact, I formatted the laptop and redownloaded all drivers on the official site for my laptop model. as an attempt to downgrade the pilot that another post never seemed work.so now everything works fine and I don't update the software driver or digitalpersona as I used everything keep on laptop to update.

• Validity Sensor

  I just got an error a yellow triangle against a validity sensor (WBF) (PID = 0050) when I click to updte it tells me that the best version is already installed.

  I have a HP Envy laptop running Windows 8.1

  Hi bridgeportdanes,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the yellow triangle on your sensor of validity. You have problems with your fingerprint sensor? Try right click and selecting Uninstall. Reinstall your HP validity fingerprint sensor driver.

  Thank you

• ZBook 15u G2: validity sensor software

  I had to unload the validity sensor software to install the new driver of validity for 10 Windows sensor.  I need to download the software from sensor but can't find it on the HP site.  Please notify.

  Thank you.

  @jha52

  Ah - well, Validity Sensor is the name of the driver software.

  The name of the security program that interacts with the fingerprint reader and its driver is probably the Client Security program - and unfortunately, this program is not listed for Windows 10 or even the 8.1 Windows operating system for this laptop.

  Another Expert may have an idea of something that could work, that is, a version of the Client Security program for your system.

  At the same time, if you are interested in getting at least work "Hello Windows" (native Windows fingerprint logon), I think it would be certainly possible.

  You can temporarily cut your Fast Start / quick start if you updated your driver validity sensor and the new driver is not yet accepted / recognized by the system.

  Quick start - turn on or off in Windows 10

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Validity sensors

  Until a few days before, I was able to log on to my desktop computer using my fingerprints, but for some reason that I can't do. How can I reset my Validity Sensor so I can use my fingerprint again on my laptop?

  Maria Adams

  Check your support page for an updated sensor Vaildity and HP SimplePass software.

  Get your full model number or product number of the Service tag on the bottom of the laptop (can be under the battery)

  How can I find my model number or product number

• You need to install firebug for and the old version of firefox (17.0.1). Where can I get the old version of firebug?

  The book that I use to learn selenium is based on firefox version 17.0.1. I know this is an old version, but I want to be consistent with the book. I installed this earlier version of firefox and now need to install a compatible version of firebug. There was a Web site: https://addons.mozilla.org/en-us/firefox/addon/firebug/versions/?page=2
  I found a compatible version of firebug on this site but I need to make sure that it is a secure site and valid to download from?

  Yes, addons.mozilla.org is a logical site to download from.

• EliteBook 840 G1: Validity Sensor fingerprint reader is not listed in biometric devices

  I received an Elitebook 840 G1, tried to turn on the fingerprint reader, but it was not acknowledged.
  Control Panel/biometrics devices, there is no device, although the "Validity Sensor" Device Manager is listed, the pilot seems too. I installed HP ProtectTools Security Manager, where I can find the footprints of the option, but to logon Windows is always Username/Password the only option to log on the system.
  Check the BIOS, fingerprint logon is enabled. Tried to uninstall Validity Sensor and then reinstall it, didn't work.

  OS: Win7 (x 64)

  

  Thank you in advance!

  See you soon,.

  Thomas

  In the meantime, I found the solution:

  I've updated HP Client (sp63509) Security Manager, opened the program, registered my fingerprints and checked 'Windows logon security' at home/Advanced Settings / Security Features.

  It finally works, I can not connect with my fingerprints.
  (Again, under control panel / biometric devices there is no item listed)

  See you soon,.

  Thomas

• I asked a question on how to disable HP Simplepass, and I got no answer. Anyone know anything about this?

  I asked a question on how to disable HP Simplepass, and I got no answer.  Anyone know anything about this?

  Hi, sorry for the wait...

  What version of Windows are you using?

  Try this:

  1 run.
  2. type netplwiz
  3. users tab

  4 uncheck users must enter a user name and password to use this computer

  5. click on apply, Ok

• Validity Sensor does not work after a while

  Hello

  I have a HP DV5t with windows Vista running on it. The fingerprint sensor works very well for a while when the system is started, but then does not respond when I slide my finger on it.

  In addition, I go to services and see the service Validity Sensor has the status 'on the road', but then when I restart the sensor service starts to meet again for a short period of time before it returns to the dormant mode again.

  The time it takes to reach the stage where it stops responding is not consistent. Could you please help me identify the problem and fix it?

  just an info. . I tried recovering system, driver upgrades/restorations to date but in vain.

  Thanks a ton!

  Prashanth

  I think you're right and it comes down to a driver problem.
  There is probably a problem with the sensor when it shuts down or trying to 'wake up '.
  Whatever it is, you will probably have to wait just for the seller to come out with a patch.

  Are there settings in software sensor that have to do with power? I doubt it, but it's worth the trip.
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.