HP Simplepass is no longer works to 8.1 windows login screen

Similar Questions

• Satellite L300 webcam no longer works after upgrade to Windows 7

  I upgraded from Win Vista to Win 7 and my webcam no longer works.
  He said that there is an error. On the support page, it is said that this model is not intended for Win7, so I installed Win Vista drivers.
  Because the driver for Win7 is not available, the link is down. http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091013162352.zip

  Any suggestions?

  Hello

  For me, it seems that you have not installed the right webcam software and so you can't get the webcam works with installed Win 7.

  Have what version of Win7 you installed? 32-bit or 64-bit?
  European driver Toshiba page provides the software of webcam for Win 7 32 bit for Satellite L300
  It s version 1.1.1.4.

  I found this choose: laptop Satellite L300 webcam driver satellite
  In such cases you will get listed all drivers webcam L300 series

• IdeaPad Z470 Wifi Fn key no longer works after upgrade to Windows 8

  Hi all, I recently upgraded my ideapad Z470 to Windows 8, however, after the upgrade, seems the function key to not activate the wifi/bluetooth no long work, when I press the function (Fn + F5) key, it just would not bring up the software switch let me toggle the wifi & bluetooth on Windows 7 is.

  Also, I noticed that the Fn + F5 was taken by the 'Airplane Mode' function Windows 8, now everytime when I press these combination, it will trigger on/off airplane mode, is there something in my wifi/Bluetooth Fn key does not work do not?

  Any software/driver that I need to reinstall to get the wifi & blueooth working again? Any idea will be grealt appreciated.

  Hello and welcome
  The combination Fn are controlled by the direction of enrrgy. However the energy management. But the software is buggy to win 8. Then please install energy for win 7... Also reinstall the drivers wifi and bluetooth.

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard & mouse not working not not at the login screen.

  I have Windows7 64 bit installed on my machine. I can't use my keyboard and USB mouse to the login screen. I tried to boot the system in safe mode, but I am facing the same problem here. When the login screen if poster my keyboard freezes and if I press num lock does nothing. My mouse stops on the login screen. I don't want to reinstall windows as it will scan all the settings I have on my machine. Is it possible to solve the problem without having to re - install windows. I tried to fix the problem using my installation disc, but I couldn't find the solution.

  Hi Philippe,.

  I suggest you to disable and re-enable the USB controller and check if it helps.
  
  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.
   
  To disable and re-enable the USB controllers, follow these steps:
  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note that you have to scroll down to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.
   
  Also, try updating the chipset drivers on the computer manufacturer site.
   
  Thank you.

• AuthenTec HP simplepass 2011 no longer works with Firefox 6

  HP Simple pass 2011, the latest version of the software "HP Simplepass", made by Authentec (so, NOT of Egistec or similar) does not work with Firefox 6.

  Looks like they are a few months behind with their updates.
  
  http://support.AuthenTec.com/knowledgebase/KBview/tabid/843/articleId/330/browsers-supported-by-HP-SimplePass.aspx

  You can contact their support as see what is happening.
  
  http://support.AuthenTec.com/forum.aspx

• Fingerprint reader no longer works on dv7 - 7373ca Windows 8.1 (64-bit)

  Hello

  I'm a dv7 - 7373ca and I installed 64-bit Windows from 8.1 to this topic. I can't seem to be able to operate the fingerprint reader. Before I formatted the computer, he had Windows 8 64 bit on it and the fingerprint reader worked perfectly.

  I installed the driver fingerprint sensor fingerprint validity provided here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109892-1&cc=us&dlc=en&lc=en... (i.e. sp58900)

  It doesn't seem to be a HP SimplePass software available for download in the on the support section of this model for Windows 8.1. So I have downlaoded the more recent for the same model but for Windows 8. (i.e. sp63224)

  Even if HP SimplePass software opens and, in my view, there is a problem with the drivers because the light next to the fingerprint reader does not illuminate and HP SimplePass says he has encountered a problem.

  Could you please help me solve my problem?

  Thank you very much

  Alex

  Well, I'm done. I installed all the other drivers, Windows Update and installed my programs. Everything works perfectly. I don't know what the problem was after my first installation of Windows 8.1. The only thing I did different in the second installation was the order in which I installed everything. Install the fingerprint sensor driver validity above all the rest, it seems to have solved the problem. That's what I would do if someone has the same problem. Install the drivers before the Windows Update.

  Thank you for your time and help,

  Alex

• AutoFill no longer works for sites with multiple login accounts

  A few days before, (I think after the update of FireFox 31), I noticed websites where I have multiple accounts login, I cannot select the username I want autofilled.
  for example: Say Gmail (or yahoo mail), I have multiple user accounts. Clicking in the user name field, correctly lists the accounts that I have on this site. However, by clicking on one of these ID does not being filled with auto name. I have to type in the entire code.
  Sites where I only have 1 ID continue to work properly.
  On a 'Utilities' Bill-pay site, where I used to have an old inactive ID, in addition to an asset, also wouldn't let me pick/auto-fill the active code. However, when I deleted the inactive ID in the drop-down list, the rest of the ID of 1 gets filled with auto.
  Once the ID is filled in, the password gets filled with auto.

  Any idea?

  You can check if this problem is caused by an extension.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• 13 spectrum HP ultrabook: cursor disappeared and the touchpad no longer works. Usable only to touch screen

  When I turned on my ultrabook today, the cursor is invisible. The touchpad is also that no longer respond. I can only use the touch screen. My product number is G1Z94EA #A2N

  Hi @Reem12,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 13-3003ex of spectrum HP and issues with the Touchpad and the cursor in the process of disappearance. Some say that you could restore the BIOS using factory default values with this. Here is a document that shows you how to restore the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Subwoofer (2.1) no longer works after upgrade to windows 7

  Problem: Subwoofer does not work in music apps, firefox, vls, itunes, etc.  When I do the speaker test in windows sounds and Manager realtek audio, the subwoofer works fine, apart from that, the cone moves during playback of music/movies

  With the help of Realtek ALC888
  Uninstalled/reinstalled drivers latest several times
  -Some people on "bass management" and "sufficiency of speaker" - it DOES get the subwoofer working in music applications, but also makes the speakers sound like S$ * t.
  -With the help of AV40 2.0 speakers + subwoofer
  -Tried all variations of the plugs
  -Works perfectly under XP

  Seems a lot of people have this problem

  Problem: Subwoofer does not work in music apps, firefox, vls, itunes, etc.  When I do the speaker test in windows sounds and Manager realtek audio, the subwoofer works fine, apart from that, the cone moves during playback of music/movies

  With the help of Realtek ALC888
  Uninstalled/reinstalled drivers latest several times
  -Some people on "bass management" and "sufficiency of speaker" - it DOES get the subwoofer working in music applications, but also makes the speakers sound like S$ * t.
  -With the help of AV40 2.0 speakers + subwoofer
  -Tried all variations of the plugs
  -Works perfectly under XP

  Seems a lot of people have this problem

  about 2.1 sound like sh... When activated from the sound card, there might be a frequency cut off the question. Let me get this straight:

  -2.1 means that your lower frequencies are sent to the subwoofer, while that med/high are routed to the speakers

  -the reduction of the frequency varies widely depending on the material used. Typical crossover produced around 60 Hz on big speakers, 100 Hz on medium-sized speakers, I heard go ca.150 Hz on systems "computer audio" low-end.

  -Send the wrong signal to your speakers strongly degrade your sound by trying to play in a band, they did not intervene, and that there is a circuit of filtering of your audio system, frequencies will be just cut off.

  To illustrate, you have a cutoff at 50 Hz frequency, and dispatcher of your chipset is a 100 Hz you send 20 to 100 Hz on your auxiliary, who will play only 20 to 50 Hz, and sending 100 Hz - 20 kHz to your speaker. ultimately you are losing 50 to 100 Hz. (numbers are there to illustrate and are random)

  The key is that you need to send a normal 2.0 system to your amplifier (which may be integrated in the speakers of such and not a separate entity) and let the sup/speaker split, as it is configured to do so at the right frequency.

• My canoscan lide 35 scanner no longer works since I have windows vista

  I can't run this scan since I installed WINDOWS VISTA and I can not find the compatible driver. Can you help me

  Thank you.
  Titine

  You posted in the English version of Windows 7 forum but describe a problem with Vista. I have moved your message in English Vista - gear Escalin area drivers.

• I get a blue screen says bug code using the driver. and the backup file. I don't know what to do and my computer no longer works. I have windows vista

  blue screen, error message bug code usb driver and file dumping crash how to stop it

  Hello

  1. what changes have been made to your computer before the problem?

  I suggest that you follow the steps in this article and see if the problem still occurs.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Valid also for Windows 7 steps)

• Satellite L300 - external screen works fine until the Windows login

  Hello world

  I am trying to use an external display with my Toshiba Satellite L300 and it works up until I have to Log in Windows (or in Ubuntu just had the same problem).

  At this point, the laptop does not seem to recognize the external display more and jump using the internal screen again.

  It might be relevant: I'm using dual boot Win XP and Ubuntu Hardy.
  The problem occurs in both systems.

  Someone knows how to fix this?

  user111

  Maybe the resolution is set too high?

  Try a lower resolution and an update of the BIOS.

• 571 aspire V3 - G Nvidia GT 630 M no longer works

  Hi I have an acer Aspire V3 - 571G and I wanted to install a new update for the nvidia driver, but he says this graphics driver could not find compatible graphics hardware and now my 630 M 2 GB no longer works and I have windows 7 64-bit on it as a default.
  can someone tell me what to do please?

  He worked at the last and his very funny for the nvidia card, I should update my card intel and then the nvidia will work correctly once again, disappointing

• The spare economy is no longer work in windows mail.

  The spare economy is no longer work

  Original title: Windows Mail.

  Hello

  1. what happens when you tried to save attachments?

  2. do you receive any error messages?

  I suggest you to run the troubleshooter for further troubleshooting step and check with the question.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
   
   
   
   

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »

  See this link for more information on:

  http://support.Microsoft.com/kb/555375