HP Slate 2: format my HP Slate 2 by USB key with a new operating system

Similar Questions

• installation of a new operating system (windows 7 x 64 ultimate) and the formatting of the hard drive

  computer laptop hp - pavilion dv6-7070se entertainment

  -windows 7 ultimate x 64

  I want to format the hard drive... .and I was wondering if I can both HP_TOOLS & recovery format safely

  and please tell me if I can not and why...

  for your information: I deleted the windows comes with my laptop and installed windows 8

  Please help me as soom as possible...

  Thank you...

  Hello

  In this case, you can delete the partitions - as you have already removed the original operating system, you would not be able to create a set of recovery discs from the recovery Partition that you have lost the application Recovery Manager required to create, but you can always order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you ever need it, the HP_TOOLS partition can be re-created by downloading and installing the software on the link below.

  HP of UEFI environment.

  Kind regards

  DP - K

• Clean? Windows 7 restarting on formatted drive, 100 MB Partition not allowed no previous operating system, after the attack of virus, it reach the wifi drivers to not load or display in the new operating system?

  Left attack virus serious that some files disabled in windows 7 (protected by Microsoft Security Essential) a program used on the computer was left partially disabled and I continue when using wireless internet. Reformatted drive leaving 100 MB Partition intact, created in new OS was an old file of Windows not wanted, impossible any attempt at the value of the days of updates, downloads & allowing also noticed wifi. Another reader reformat leaving 100 MB partition again not affected since the original OS. All programs loaded & all updates succeeded, but still did not have through any discussion read to get the computer to WiFi wifi as in Starbucks invites you to discover. I have another operating system on the computer that is able to discover drive internet wifi from loading with windows 7 so not a hardware problem, I think. Question is can a formatted drive on the left with its original partition of 100 MB OS questions with new reloaded windows 7 and is the new installation of the operating system clearly & repopulate this partition of 100 MB for no bug cannot continue to corrupt and better performance? Thank you all.

  A new installation of windows 7 can be said to delete this partition. do you when you get to the section "where do you want to install windows?" in installing windows 7. There is a player options button that allows you to delete both partitions... then create 1 new partition for windows and it throws a message saying that the operating system can create additional partitions... blah blah... and she... that way the 100 MB partition is clear. MyPcHealth - free tools

• format drive then download the new operating system

  I have a late 2012 mini mac osx Mavericks 10.9.5 I want to format the drive, then download el captian I will backup everything before you do running.

  -Download the installer for OSX El Capitan from the Mac App store.

  -Make a USB bootable media using the following:

  DiskMaker X

  -Start since the media

  -Format the boot disk and install OSX from bootable media

  -Restore your data

• I formatted my hard drive, and when I try to install an operating system, repeat me "bootmgr is missing".

  I formatted a hard drive and when I try to install an o/s he repeats to me bootmgr is missing. I tried 2 o/s XP and win7 is just does not start... and the BIOS is missing pls help.

  original title: I formatted

  Create a bootable CD using one of the two utilities listed below. The utility allows you to delete the partition so that the disk space is listed as "unallocated". Do not create a new partition, just boot from the Windows CD or DVD and let the installation process to create the Windows partition.

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, Format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  General fill info zero (including screenshots): http://gizmodo.com/5494427/leave-no-trace-how-to-completely-erase-your-hard-drives-ssds-and-thumb-drives

  J W Stuart: http://www.pagestart.com

• How can I re - format a computer bought at a garage sale with a new copy of Windows XP?

  I bought 2 old dell P/C for next to nothing at the garage sale, the former owner had 1 password but not for the other, I have the hard drive erased 2nd need n o/s to download n boot up so that my wife can have his own general insurance to facebook! Please help in anyway cheap n possible, and if I had the money to buy the new disk would not selection obsolete shopped in the Department and trashy neighborhoods hand! LOL, all had two X / home of P? any advice? Is it possible to copy the o/s of master drive to the slave drive? Thank you

  original title: HELPME

  You'll need to get the correct disks and perform a "clean installation" see: How to ask Dell backup discs.

• Windows keeps freezing whenever I insert a USB key which has been formatted on a Linux machine.

  I'm mostly a Linux user, but having to use Windows machines at work sometimes.  I format all my USB format keys FAT in Windows because Windows is not able to read the format file ext4 that prefer Linux.  Whenever I plug the thumb drive in one of our Windows 7 computers to work, Windows will freeze for 30 seconds to two minutes, then tell me that it cannot find a file to open my tar.gz files (no duh - tar.gz is not a format compatible windows) then he very slowly shows the contents of the disc.

  Any advice on how to keep Windows 7 machines Flake whenever you plug in a USB key with files in Linux on it?

  It of curious why Windows try to open archive.  If you hold down the SHIFT key when you insert the USB (to remove any autorun), does make a difference?  AutoPlay is enabled in Control Panel / AutoPlay?

  FWIW see

  How to change the AutoPlay settings in Windows

  http://www.LostInTechnology.com/Windows/how-to-change-Autorun-settings-in-Windows/

• I am trying to edit music digitized using Adobe Acrobat DC on a Lenovo tablet, Windows 7 operating system.  Adobe Acrobat DC rejects the analysis as unchangeable.  I export to a word document and re-export to AADC in pdf format.  It will then allow to cul

  Hello.  I'm currently editing digital music pdf using Adobe Acrobat DC on a Lenovo tablet with Windows 7 operating system.  Adobe Acrobat rejects the analysis as unchangeable.  I export the scanned pdf to MS Word and re-export to AADC in pdf format.  This can be cropped, but the edit function does not allow the movement of the measures (or 'skin measures text') within a team.  I am producing pages with 3 litters per page and 3 measures by staff who can be sufficiently enlarged to a blind musician.  My failure to change the measures so far means there is too much information by page and the page can be expanded properly. Advice please.  Thank you.  Charles.

  This is well beyond what Acrobat is intended - not just a little far, but a lot. PDF is therefore completely inappropriate for this.

  Address bits scan and cutting/organizing her before making a PDF. Maybe in Photoshop.

• WeatherBug: App incompatible with the installed version of the operating system (HP Slate 7)

  Greetings!

  First post of this forum and a relatively new user of any kind of Tablet.  Yes, sorry if I miss some "Exchange of detachment" to ask for the help.

  There is a NEW Tablet and after download/installation of operating system updates, went to download WeatherBug on Store.  WeatherBug was not available.

  I found an alternative download site, but was messaged that the version is not compatible.

  It seems strange that I've installed WeatherBug on all everything I have.

  Android version: 4.1.1

  Kernel Version 3.0.8.

  Build number: HP_Slate7 v1.05.8_user

  Thank you!

  Hello BigSkyMike, welcome to the HP support community!

  Unfortunately, since the Slate7 has no built-in GPS chip, programs are written and require the chip will be displayed as "incompatible".

  There are solutions, and these have been discussed in other threads like this one:

  http://h30434.www3.HP.com/T5/Android-tablets-e-g-HP-slate-7/apps-like-Instagram-not-compatible-in-Slate-7/m-p/2746285#U2746285

  WyreNut

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• Impossible to format USB key

  Tried to format the USB key for use in my camera clubs. They couldn't find / read / or receive message saying 'must drive e to the format to use. I tried to format it to MS-DOS and ExFat on IMac and laptop Pro. ElCapitan Version 10.11.2. Anyone else have the problem?

  This link can help you format the USB key to the default settings: read for both MAC and WINDOWS: http://www.pendrivelinux.com/restoring-your-usb-key-partition/

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Opening photos in format full screen on computer from USB

  A usb stick in to open the pictures on it. Opened successfully before but now when I click on the small photo to open it full size, I get only naughts and dashes and no picture, what can I do to fix this?

  Low word pad shows the computer icon, this closed, but it always appears at the base when I click photo to open full screen mode.

  Looks as if she's trying to open the picture in that program. Don't know what to do. Can someone please!

  Cordially Yvie

  Hi thanks for the quick response. My windows operating system is Windows XP.

  =======================================

  Try this... open a folder of images and right-click
  your file image... from the menu, select... Open
  With / choose program.

  Make your choice from the list, or click Browse for the
  correct program if it is not in the list. If you want
  the Windows XP default... choose "Windows".
  Picture and Fax Viewer'.

  Once you make your choice... don't forget to check
  the box that says: "always use the selected program."
  to open this type of file. (you will need to do
  for each format, jpg, .tif, .gif... etc.)

  Also... you can right click an image and the
  menu... Choose... Properties / change button...
  Choose the program you want to use, then click on...
  OK / apply / OK.

  Also, in Windows XP, you can go to... My computer.
  Tools / Folder Options / File Types tab...

  If this is not the answer... try the following link:

  By clicking on the "open with" or "choose program...
  "the option always opens the file with Notepad.
  http://WindowsXP.MVPs.org/openas.htm

• How to: format and reinstall the operating system

  Original title: is there a virus that downloads all the images that appear on windows xp family within 24 hours, I have acquired 17 000 images and used to my PC I want to enter windows in any mode

  I can't navigate what whether in safe mode with or without networking. How to flatten the system, which dates back to the original state that I'm not bothered about registering files images etc want just my PC to work

  Hi wendyspeariett,

  1. you receive an error message when you start in safe mode or normal mode?

  2. did you of recent changes on the computer?

  If you have access to the internet in safe mode with network, then you will need to scan the computer to remove all infections from the computer and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  If you want to format new Windows XP installation, you can move forward.

  A new installation is to remove all data from your hard drive repartition and reformat the hard drive and reinstall the operating system and programs empty (clean) hard disk.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10