HP Slate 6 do not charge, seems to matter of charge usb port!

Hello

On April 27, I bought a HP Slate 6 eme, 2014 is a guarantee.

I am facing a problem that HP Slate 6 not load and sometimes showing the load but taking 2 hours to 1 unit of the capacity indicator!

I checked the cable but another device of load with the same cable that is in charge fine.so, it seems, is not cable issue rather charge port connectivity problem.

Can anyone suggest how can I repair or replace the unit?

What is the procedure? How to locate a nerby authorized HP repair/replacement Phablet Center South of Chennai, in India.

It is very urgent that I have all my contacts in there.

Hello and welcome to the HP support community!

To contact HP directly, click on this link: http://h22207.www2.hp.com/us-en/contact-hp/

Outside the United States:
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

WyreNut

Tags: HP Tablets

Similar Questions

  • Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

    Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

    What Mac? (details)

  • BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

    We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

    SlaKir wrote:

    The answer is YES

    Well, then your USB port is likely.

    Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

    Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

    Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

    Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

  • Why computer does not sleep if something is supported on USB port?

    When I try to load things into the USB port of the computer sleeps so they do not charge fully.  Can I substitute this short to change the time to sleep when I want to load something?  I thought that the only charge would make the computer think it is busy and so no sleep...

    In the heart Control Panel, double click on your chosen power plan Power Options click on "Change plan settings," to "Turn off the display" and to "Put the computer to sleep" choose "Never" to "on battery" and "Plugged in", then click on the 'Save changes' button below. I hope I could help

  • HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

    Hello

    I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

    Sincerely

    Hello metehangunaydin,

    Please try the procedure below so that you can at least be able to print.

    1. click on the Start button on the computer.
    2. then click on Control Panel.
    3. then printers and faxes
    4. in the top left, click on add a printer
    5. click Add a local printer
    6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
    "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

    Now try printing. It should work.

  • Re: Satellite S50-B-15F - mouse not working not not on 3.0 or 2.0 USB port

    I have this mouse Steelseries Sensei, who works on all other computers I've tried, but on this laptop, it doesn't.
    Plug into the port 3.0 does not work and plug it into the port 2.0 makes this kind of work but skips working for seconds and after 20 seconds, it stops working at all. This is a new laptop with windows 8.1.
    The mouse is supposed to be plug-and-play like all software runs on the mouse itself.

    These are things I've tried:
    -Installation of the drivers. The mouse is not recognized.
    -Flashing new firmware with utility Steelseries. It crashes at halfway through leaving the mouse unusable. The flash of the firmware can be done on other PCs
    -Adjustment of the power load 1.5 turned on in the bios.
    -Eco mode off.
    -Disabling usb selective suspend setting in advanced power options
    the mouse still does not work

    I just discovered the mouse works fine on the laptop connected via a usb hub 2.0 in 2.0 or 3.0 port, if it is not a great solution

    Just a question at the beginning: you tested the functionality of USB ports with other USB devices?
    Are any other external devices such as USB keys or mobile phone connected correctly recognized?

  • Qosmio G does not recognize the mouse using two left USB ports

    I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

    The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
    He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

    In any case the mouse doesn't at all plugged into ports on the left side.

    Does anyone have any ideas as to why what is happening?
    Look of Sean.

    Hello

    Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
    Maybe you should do this to see if it could be a defective USP port.

    But I recommend to test this;
    First disconnect all USB devices
    Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
    Close all windows and restart the laptop.

    Finally the operating system should recognize the new devices (USB ports) again.
    Connect a USB device to one of the ports on the left and check if it would work.

    Good bye

    PS: What Qosmio do you have?

  • I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

    Help with my computer of dumping

    I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

    If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

  • SanDisk Cruzer Contour do not recognize when it is attached to USB port

    I used this: http://kb.sandisk.com/app/answers/detail/a_id/2550/kw/remove%20u3/r_id/101834 to remove it (U3). I used "not all data on the USB key will be destroyed and cannot be recovered" and after formatting, installation said "the program has encountered a critical error and must exit. Please try again. If the problem persists, contact the support center of SanDisk at the www.sandisk.com/support'.» Now, if I put this Cruzer into USB port nothing will happen. 'My computer' show nothing. I dreamed about 30 GB NTFS flash station... I know not even is it possible to get it with NTFS or is it question of FAT32... but now it's as if "I have nothing".

    I solved it. Now it works Ok. Really dream came true. Forgeet that.

  • Windows Vista does not recognize my camera when plugged into USB port

    I recently had a problem with updates do not install it on my laptop Gateway 6840 running Vista. Community Microsoft guided me through a process that solved the problem and it worked fine. However, later, I tried to plug my Fujifilm AX560 into a USB port and the computer is no longer recognized. Ports recognize my memory sticks though very slowly. I tried a lot of previous solutions on Microsoft Community, but nothing has worked. Appreciate any help.  Thank you.

    Problem solved! I used sugestion of Shekhar S to use Microsoft Fix It only the second I had my camera is plugged in and turned on. Thanks Shekhar S and thank you Microsoft Community.

  • HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

    I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

    Hello

    Your machine IS not card reader. His record:

    http://support.HP.com/au-en/document/c04420347

    which indicates:

    External ports:

    • Multi format digital card reader for Secure Digital cards
    • 2 superSpeed USB 3.0
    • 1 bus (USB) 2.0 universal series
    • 1 HDMI
    • 1 PORT RJ-45 (LAN)
    • 1 plug headphone-out/microphone-in the drop-down list

    Location:

    Everything you need: download Driver Realtek card reader and install it on your computer.

    http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

    For your question: all the USB ports work?

    Kind regards.

  • Slate 7 does not charge

    The little tab inside the module of USB support broke on my Slate 7 tablet.  The guarantee that self-control says I'm still under warranty.  I would like for this send to fix or maybe get a new.  Basically since I got this thing, the charger was flaky and now that he has broken with his adult use and no mishandling shows that it is probably faulty in EEG.  Please let me know what are my options gor get this resolved.

    To contact HP directly, click on this link: http://h22207.www2.hp.com/us-en/contact-hp/

    WyreNut

  • My cell phone does not have to be connected to the USB port

    Hello

    I tried to understand this. But I have no idea!

    I try to install my mobile [Samsung D900i Candy] on my laptop, so I can transfer files, etc...

    So I installed it online using a windows vista compatible and everything worked... and my laptop says it's ready to use...
    If the installation was successful. Only its not appearing to appear... I plug in the USB... connected to my phone and it is not at all anywhere, but it works, cause my start phone to load.

    So I was wondering if anyone had any idea of what was going on as his kind of emergency I get this to work!

    Thanks for your time
    + Michelle Xo +.

    Already checked the manufacturer of phones forum? Since then, it seems that the problem is not really the machine, it s more a software problem. Did you already check for a software update for your phone software.

    Otherwise, since it s more a phone related problem you should really check google or forum of manufacturers.

    Welcome them

  • New wireless keyboard/mouse replacement does not work without the transmitter into the USB port

    Why?

    My computer shows also now that I have 2 keyboards and 2 mice.

    Microsoft Wireless Comfort Keyboard 5000

    A moderator has moved this thread to Windows, hardware and drivers Forum.

    Hello

    1. who is the operating system installed on the computer?

    2. you are using laptop or desktop?

    You cannot connect your keyboard and wireless mouse without using the transmitter as it is by design.

    Visit the link below and download the Quick Start Guide, for details about the configuration of Microsoft Wireless Comfort Keyboard 5000.

    http://www.Microsoft.com/hardware/en-us/p/wireless-comfort-desktop-5000/CSD-00001#support

    I hope this helps!

  • "Always-on" USB port not charging phones when turned off.

    Hello community,

    I have a Thinkpad Edge E520 1143 AK7, working on windows 8, 32 Bit Pro.

    From somewhere in the settings I had turned off load option on ' always - on ' USB port since I did not have a smart phone.

    Now, I have a smart phone and wanted to restore the facility. However, I can't find the option to activate the settings.

    Please note that I have activated all 3 BIOS options and 'refreshed' the machine to the default state.

    Please note that charges USB port when the system is started and stopped when I stopped the load PC.

    But no luck. Ask for your help on the same.

    Thank you

    EUREKA... EUREKA...

    Guys, it was informative.

    My phone was usually charge of the last USB port on the left side of the E-520, while I was working on the computer.

    After finishing my work, I closed the computer... all the power off...

    The required phone support... I unplugged the phone, close, waited 20 seconds and reconnected, computer connected... PHONE HAS STARTED TO LOAD!

    ("This suggests that all the USB" COULD "be always on the ports ) Lenovo... listen to u?

Maybe you are looking for

  • Trouble with my Apple ID it is disable

    My iPad Apple ID is turn off how can I put it esable

  • FVS336Gv3 - IPv6 flow slower than IPv4

    If the data sheet lists the FVS336Gv3 as having a 'LAN-to-WAN throughput' of 350mbps, with an asterisk of "actual performance may vary depending on the environment and the network traffic. I discovered that while IPv4 traffic is close in fact the num

  • suggestions for the purchase of new digital SLR.

    I am interested in taking photagraphs of close zoom of flowers as well as the zoom away from mountain landscapes, natural landscapes. And also I want to know the technical details and usage before you buy. Please, help me to get the right with approp

  • You want to take backup USB 3 n 1 player to the Windows XP computer.

    Original title: 3 n USB adapters fitting 1. I have a usb 3 n 1 drive adaptor plugged into an infected computer and I would see that he kept this computer but I don't know how, please help!  I am just checking that it saved so I can connect a machine

  • Registration of Internet dowload manager

    HelloThey ask for registration of Internet download manager serial number. I don't know where to find this number. Can someone help me with this?